Current issue
Volume 13, Issue 2, 2024
Online ISSN: 2182-1054
Volume 13 , Issue 2, (2024)
Published: 18.10.2024.
Open Access
All issues
Contents
18.10.2018.
Original scientific paper
Production of camel milk yoghurt: physicochemical and microbiological quality and consumer acceptability
The objectives of this study were to make yoghurt from camel milk and determine its physicochemical, microbiological and sensory qualities. The quality of camel milk yoghurt was compared with cow milk yoghurt and all parameters were analyzed following standard procedures. Yoghurt of acceptable consistency was made from camel milk using 1.2% gelatin, 5% bovine skim milk powder, 1.5 ml/L of calcium chloride, 40 ml/L of maple strawberry syrup and 6% yoghurt culture (YF-L811) and by incubating the milk at 42°C for 18 h. The average values for moisture, ash, syneresis, pH, titratable acidity and total solids of camel milk yoghurt were 83.4%, 1.13%, 58%, 4.37, 1.255% lactic acid and 16.7%, respectively. The corresponding values for cow milk yoghurt were 80.6%, 0.71%, 56%, 4.67, 0.865% lactic acid and 19.5%, respectively. The titratable acidity of camel milk yoghurt was significantly higher (P<0.05) than cow milk yoghurt; however, no significant difference was observed between the two yoghurt types for the other parameters. Coliforms were not detected in both yoghurt types. The sensory analysis showed that cow milk yoghurt was more preferred by the panellists than camel milk yoghurt. Production of yoghurt from camel milk using the same procedure as for cow milk yoghurt proved to be difficult. Further research is called for to improve the acceptability of camel milk yoghurt using locally available and acceptable flavouring agents. Research needs to be conducted to optimize the operating parameters and standardize the production procedures of camel milk yoghurt in the future.
Obakeng Galeboe, Eyassu Seifu, Bonno Sekwati-Monang
18.04.2018.
Original scientific paper
Fermentation of tender coconut water by probiotic bacteria Bacillus coagulans
Coconut water is currently being considered as an elixir for patients suffering from diseases like dengue and malaria as well as chikungunia to provide hydration properties to the body. It has become a popular beverage for many people owing to its palatability and high mineral content. In this study, the growth, survival and fermentation performance of the probiotic bacterium Bacillus coagulans in coconut water was assessed in order to produce a novel non-dairy, probiotic beverage. The species was characterized on the basis of morphology, physiology and biochemical parameters and its probiotic attributes were assessed. Batch fermentations were carried out for 2 days at a constant 37°C, thereafter the samples were subjected to microbiological and chemical analysis. The results suggested that the specie produced lactic acid and was acid and bile tolerant. The pH and titratable acidity of probiotic fermented coconut water were found to be 4.4 and 0.53 % lactic acid, respectively. The viscosity of fermented coconut water increased significantly from an initial 5.13 mPa.s to 5.35 mPa.s because of the increase in soluble solids content due to exopolysaccharide production by B. coagulans during fermentation. Also, the overall acceptability score of probiotic coconut water was higher than tender coconut water, suggesting its feasibility for use as a probiotic beverage.
Aishwarya Singh Gangwar, Aastha Bhardwaj, Vasudha Sharma
18.04.2018.
Original scientific paper
Examination of optimum test conditions for a 3-point bending and cutting test to evaluate sound emission of wafer during deformation
The purpose of this study was to investigate optimum test conditions of acoustical-mechanical measurement of wafer analysed by Acoustic Envelope Detector attached to the Texture Analyser. Forcedisplacement and acoustic signals were simultaneously recorded applying two different methods (3-point bending and cutting test). In order to study acoustical-mechanical behaviour of wafers, the parameters “maximum sound pressure”, “total count peaks” and “mean sound value” were used and optimal test conditions of microphone position and test speed were examined. With a microphone position of 45° angle and 1 cm distance and at a low test speed of 0.5 mm/s wafers of different quality could be distinguished best. The angle of microphone did not have significant effect on acoustic results and the nu
ERDEM CARSANBA, Gerhard Schleining
18.04.2018.
Original scientific paper
Food oral processing in humans: links between physiological parameters, release of flavour stimuli and flavour perception of food
In humans, food oral processing (FOP) is the first step in the digestive process. It prepares the food for swallowing and to undergo the process of digestion. During chewing, the food is comminuted by the combined action of chewing and saliva to form a bolus. The particle size of the bolus is reduced due to the action of the tongue and the teeth, and the saliva is continuously produced by the salivary glands to humidify and impregnate the food. Saliva lubricates the bolus and enables the cohesion of particles to prepare for swallowing. During food oral processing, the compounds responsible for food flavour and taste are released, leading to the perception of food organoleptic properties and significantly contributing to the consumer’s acceptability of the product. Understanding this process of food breakdown and bolus formation thus appears to be a way to revisit food functional properties. However, this process is extremely complex, and as such, its description necessitates a combination of many quantities from different disciplines, i.e., physics, chemistry, physiology, psychology, behavioural science and food science. It depends, on one hand, on food properties and on the other hand, it depends on oral physiology. However, large inter-individual variability is commonly observed, which has important consequences on flavour release and perception. The challenge for the food industry is to be able to develop food considering this large variability, and sensory and nutritional constraints. This challenge is particularly relevant when specific populations (i.e., elderly, infants or obese subjects) are considered.
Gilles FERON, Christian Salles
18.10.2018.
Original scientific paper
Consumers’ willingness to consume cassava leaves as a leafy vegetable in the Kumasi Metropolis, Ghana
This study employs the logit model to assess the determinants of consumers’ willingness to consume cassava leaves as a leafy vegetable in the Kumasi Metropolis of Ghana. A multistage sampling technique was used to select 180 respondents for the study. The study found that majority (76%) of the respondents had no knowledge of the nutritional value of cassava leaves, though they had consumed the product before. The empirical results showed that socioeconomic characteristics of respondents such as age, sex, household size and monthly income, as well as their perceptions on the attributes and use of cassava leaves as food have significant influence on willingness to consume cassava leaves as a leafy vegetable. There is the need to provide information on the nutritional benefits of cassava leaves to facilitate decision-making on its utilisation/consumption. Programmes aimed at promoting the consumption of cassava leaves should consider the significant variables that have influence on the consumption of the product.
Fred Nimoh, Godfred O. Asare, Ismael Twumasi, Richmond Anaman
01.12.2017.
Professional paper
Effect of storage time and gamma irradiation on the chemical properties of olive (Olea europaea) oils
M. Al-Bachir
01.12.2017.
Professional paper
Food oral processing in humans: links between physiological parameters, release of flavour stimuli and flavour perception of food
Gilles Feron, Christian Salles
01.12.2017.
Professional paper
Estimating the risk of phthalates exposure via tea consumption in general population
Mohammad Mehdi Amin, Foruz Rastegari, Parinaz Poursafa, Karim Ebrahim
01.12.2017.
Professional paper
Optimization of osmotic dehydration of chestnut (Castanea sativa Mill.) slices using Response Surface Methodology
Teresa Delgado, Bruna Paim, José Alberto Pereira, Susana Casal, Elsa Ramalhosa
01.12.2017.
Professional paper
Effects of heat treatment by immersion in household conditions on olive oil as compared to other culinary oils: a descriptive study
Carlos A. Nogueira-de-Almeida, Geórgia A. De Castro