A second nutrition transition seems to be emerging towards more plant-based diets, curbing meat consumption in developed countries at the beginning of the 21st century. This shift suggests that rational arguments tend to influence an increasing number of individuals to adopt vegetarian diets. This work aimed to understand and simulate the impact of different types of messages on the choice to change food diets at the individual level, and the impact of the diffusion of opinions at the collective level. It provided two results: (1) a network of arguments around vegetarian diets is modelled using an abstract argumentation approach. Each argument, formalized by a node, was connected with other arguments by arrows, thus formalizing relationships between arguments. This methodology made it possible to formalize an argument network about vegetarian diets and to identify the importance of health arguments compared to ethical or other types of arguments. This methodology also identified key arguments as a result of their high centrality in being challenged or challenging other arguments. The results of constructing this argument network suggested that any controversy surrounding vegetarian diets will be polarized around such high centrality arguments about health. Even though few ethical arguments appeared in our network, the health arguments concerning the necessity or not of animal products for humans were indirectly connected with ethical choices towards vegetarian diets; (2) an agent-based simulation of the social diffusion of opinions and practices concerning meat consumption is then introduced. The purpose of this simulation was to capture the balance of vegetarian vs. meat-based diets. It contributes to modelling consumer choices by exploring the balance between individual values and external influences such as social pressure, communication campaigns and sanitary, environmental or ethical crises.

This study produced fish mortadella from Mechanically Separated Meat (MSM) of Nile tilapia added with animal fat. Three formulations were developed: M1 (MSM - 89 % and 5 % pork fat), M2 (MSM - 84 % and 10 % pork fat) and M3 (MSM - 79 % and 15 % pork fat). The elaborated products were tested for technological, physical, physico-chemical, microbiological and sensory parameters. The results showed that the fish mortadella were microbiologically stable with a particular texture for an emulsified meat product, attractive colour and characteristic flavour. All formulations met the expected identity and quality requirements. They also achieved good acceptance by the judges, in which formulation M1 may be highlighted for presenting an emulsion stability of 97 %, higher protein content (18.09 %) and lower lipids (16.31 %). In addition, it also reached higher mean scores for texture attributes and purchase intent. Therefore, it is possible to prepare fish mortadellas from tilapia MSM using less animal fat.

Pasteurized fresh milk requires an accurate estimation of shelf life under various conditions to minimize the risk of spoilage and product losses. Milk samples were stored for 56 h in an oven at 25°C and for 15 days in a refrigerator at 4°C. Samples were analyzed using an electronic nose (e-nose), total bacterial count, titratable acidity and pH to determine the quality of milk. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were used to analyze e-nose data of milk stored at 25°C, and 4°C. A clear shift in quality was identified by the e-nose, which also appeared in the total bacterial count after 24 h and 12 days for storage at 25 and 4°C, respectively. On the other hand, titratable acidity exceeded the normal limits of 0.14 % - 0.21 % after 24 h for storage at 25°C (0.247 ± 0.006 %) and after 15 days for storage at 4°C (0.25 ± 0.01 %). If pH was a good indicator of quality for samples stored at 25°C, it showed no clear trends for samples stored at 4°C. Based on the microbial count data and e-nose output, the milk had a shelf life of 0.3 day (i.e. 8 h) when stored at 25°C. Shelf life was extended to 9 days when stored at 4°C.

Due to the high level of antioxidant activity of acorn fruits, they can be used as an ingredient the production of functional foods. The goal of the this research was to partially substitute wheat flour with varying levels (10% - 50% w/w) of debittered acorn flour and to investigate its effects on the rheological characteristics of the dough, total phenolic content (TPC), staling, colour indices and sensory properties of toast bread. The farinograph degree of softening and water absorption of the dough decreased with increasing the acorn flour content, while the stability and time of development of the dough increased. Resistance and extensibility to deformation of the samples respectively increased and decreased compared to those of the control. Toast bread with 30% acorn flour replacement was observed to have lower staling than the control. The highest TPC (9.44 mg GAE/g) and the lowest peroxide value (0.36 m eq O2/kg) were obtained for the bread having 30% acorn flour substitution. Moreover, the breads showed darker crumbs with significantly lower specific loaf volumes. Overall, the bread with 30% of acorn flour substitution showed good rheological, staling properties and reasonable anti-oxidant content compared to the control bread as well as the highest sensorial acceptability.

Membrane process is an intelligent alternative way of concentration, preferably for organic juices rich in thermolabile natural components. The expectation is to scale up the extraction of desired compounds from agro-industrial wastes through modernized concentration method. Recovery of betalains, phenolic, and antioxidant from beetroot peel extracts was accomplished by nanofiltration membrane (NF 200) at a recirculation flow rate (400 L h-1) and feed temperature (30 ºC) under constant transmembrane pressure (40 bar). Characterization of betaxanthin, betacyanin, phenolic, and antioxidant activity by spectrophotometric analysis revealed that the final samples contain these compounds respectively: 202.25±3.26 mg.L-1, 360.07±8.43 mg.L-1, 987.79±19.18 mg.L-1, 642.06±14.78 mg.L-1 (pure water); 206.62±1.37 mg.L-1, 339.72±2.89 mg.L-1, 972.72±47.49 mg.L-1, 745.97±25.45 mg.L-1 (ethanol-water). Final samples exhibit vivid colour and a considerably large amount of desired compounds compared to crude extracts and could have industrial applications.

The present study was conducted to develop non-cereal starch extruded products. The effects of feed moisture (15-21%), temperature (130-170 °C) and screw speed (120-160 rpm) were evaluated on the physical and functional properties of extruded snacks using response surface methodology. Feed moisture and screw speed increased the bulk density and hardness of extruded snacks. Significant decreases in water absorption index and increases in water solubility index were observed with increases in extrusion temperature. The best conditions were determined by numerical optimization. The optimized value for non-cereal snacks for feed moisture is 18.22%, temperature 155.96 °C, screw speed 142.75 rpm and, desirability is 0.75. Verification of results showed decent agreement between the responses of experimental values at certain optimum conditions and the predicted values.

The contamination of fresh produce with antibiotic-resistant bacteria is of particular concern as they are often eaten raw and can be a source for foodborne diseases. Tetracyclines have been largely used in humans, animals and plants which might have accelerated microbial resistance to them. Enterococci and Escherichia coli can be used as indicators to monitor contamination of the fresh produce with tetracycline-resistant bacteria. The investigation related to this issue is very scarce in Oman. This study aimed at identifying tetracycline-resistant enterococci and E. coli in fresh produce at the market place. Thirty-one enterococci and ten E. coli were isolated from local (Oman) and imported fruits and vegetables (N= 105). Using the standard Kirby-Bauer disc diffusion method, resistance to tetracycline was found in 6 (19 %) enterococci, isolated from cucumber, lettuce and radish, and 5 (50 %) E. coli, obtained from cabbage, lettuce and radish. Genetic analysis revealed the presence of tetracycline resistance genes, tet(A) and tet(K), in E. coli and tet(K), tet(L) and tet(M) in enterococci, including Enterococcus sulfureus, Enterococcus mundtii, Enterococcus casseli avus and Enterococcus faecalis. The integron integrase IntI 1 gene, which is known to facilitate the dissemination of antibiotic resistance genes among bacteria, was detected in 2 isolates of E. coli. These results demonstrated the capability of fresh produce to act as a potential source for disseminating tetracycline or possibly other antibiotic-resistant bacteria through the food chain. Thus, control strategies are needed to reduce exposure of the public to such microorganisms.

The aim of this work was to evaluate the effects of the addition of swine skin on the technological characteristics of mortadella formulations produced on industrial scale. The effects of concentrations of swine skin (1.5 to 5.5 %) and sodium chloride (2 to 3 %) on total protein, total fat, starch, moisture, water activity, sodium, pH and texture profile (hardness, adhesiveness, elasticity, cohesiveness and chewiness) were evaluated and compared to a mortadella formulation without swine skin addition. The mortadella formulations with addition of 3.5 to 5.5 % swine skin and 2 to 2.5 % sodium chloride are in accordance with Brazilian legislation and provided an increase of approximately 12 % in protein content, a decrease of 14 % in sodium content and a water activity less than 0.9488. The swine skin and sodium chloride provided stability to the mortadella and influenced its texture, mainly in hardness, elasticity and chewiness.

This study compared, for the first time, the postharvest conservative action of edible fungal chitosan coatings (gel, nanoparticles and gel-nanoparticle) on the physico-chemical, sensorial and microbiological characteristics of strawberries. The nanoparticles were prepared by an ionic gelation method and characterized by dynamic light scattering and scanning electron microscopy. The antioxidant (DPPH* and ABTS*) activity of the edible coatings and the antimicrobial (macrodilution method) action against phytopathogenic fungi were verified. The nanoparticles had a size of 331.1 nm and a zeta potential of+ 34 mV. The gel, nanoparticles and gel+nanoparticles exhibited minimum inhibitory concentration values ranging from 4 to 5, 1.5 to 2.5 and 1.0 + 0.5 to 2.0 + 1.5 g.L-1, respectively. All the edible coatings exhibited antifungal action. All the coatings had high scavenging activity, especially the gel edible coating. The coatings, especially the gel+nanoparticles, decreased the weight loss, microbiological growth, soluble solids, maturity index and moisture loss of the strawberry and preserved the pH values, anthocyanin content, titratable acidity and sensory characteristics. Therefore, the use of chitosan edible coating containing nanoparticles can be a promising strategy to improve the post-harvest quality of strawberries.

Bakery products are generally made up of refined wheat flour that may be deficient in both fibre and essential fatty acids. In this study α-linolenic acid and fibre enriched rusk using flax seeds and finger millet were developed. The proportions of finger millet, flax seed and wheat flours were optimized using Response Surface Methodology (RSM). On the basis of fibre and ALA content and baking quality characteristics of rusk 13.13%, 6.0% and 80.6% of finger millet, flax seed and wheat flours, respectively was finalized. The developed rusk contained 4.81% fibre and 1.36% α-linolenic acid. Wet and dry gluten content, SDS sedimentation, falling number, dough raising capacity of yeast and baking time of mixed flour of these components were statistically (p>0.05) similar to that of wheat flour (control). However, higher loaf weight and lower loaf height was observed in mixed flour rusk in comparison to control rusk. α-linolenic acid and fibres enriched rusk were developed with similar quality parameters and improved functional properties.