Current issue

Issue image

Volume 13, Issue 2, 2024

Online ISSN: 2182-1054

Volume 13 , Issue 2, (2024)

Published: 18.10.2024.

Open Access

All issues

More Filters

Contents

01.12.2017.

Professional paper

Energy pattern and conservations of condiment produced from soybean (Glycine max)

Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg-1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energy used during production process. Conservation approach I resulted in mean energy of 72.08 ± 1.73MJkg-1 where electrical energy, manual energy and thermal energy accounted for 1.75MJ (3%) 7.34MJ (10%) and 62.99MJ (87%) respectively.  Conservation approach II reduced the energy further to 57.24 ± 1.73MJkg-1  as the operation was thermal energy dependent, followed by manual and electrical energy with energy values of 48.13, 7.33 and 1.78MJ equivalent to 84.10%, 12.80% and  3.10% accordingly. Conclusively, traditional method of processing utilized highest energy (445.40MJ) followed by conservation approach I (72.08MJ) and conservation approach II (57.24MJ) was least in energy demand. Conservation approach II permits energy conservation to be 87% as compared with traditional method.

Ismaila B. Anjorin, Rahman Akinoso, Mayowa S. Sanusi

18.04.2018.

Original scientific paper

Optimization of osmotic dehydration of chestnut (Castanea sativa Mill.) slices using Response Surface Methodology

Osmotic dehydration of chestnut slices in sucrose was optimized for the first time by Response Surface Methodology (RSM). Experiments were planned according to a three-factor central composite design (α=1.68), studying the influence of sucrose concentration, temperature and time, on the following parameters: volume ratio, water activity, color variation, weight reduction, solids gain, water loss and normalized moisture content, as well as total moisture, ash and fat contents. The experimental data was adequately fitted into second-order polynomial models with coefficients of determination (R2 ) from 0.716 to 0.976, adjusted-R2 values from 0.460 to 0.954, and non-significant lacks of fit. The optimal osmotic dehydration process conditions for maximum water loss and minimum solids gain and color variation were determined by the “Response Optimizer” option: 83% sucrose concentration, 20 °C and 9.2 hours. Thus, the best operational conditions corresponded to high sugar concentration and low temperature, improving energy saving and decreasing the process costs.

Teresa Delgado, Bruna Paim, Jose Alberto Pereira, Susana Casal, Elsa Ramalhosa

18.10.2018.

Original scientific paper

Antioxidant activities of aqueous extracts from nine different rose cultivars

Rose petals have been applied as food additives in teas, cakes and flavor extracts. The aim of this research study was to explore and reveal the antioxidant potential of aqueous extracts of rose petals belonging to nine genotypes of rose (wild as well as hybrid). The in vitro antioxidant activities of roses were studied by lipid peroxidation assay, DPPH radical scavenging assay, iron chelation assay, phosphomolybdenum reduction assay and total phenolic and flavonoid contents. The aqueous extract showed inhibition against lipid peroxidation (TBARS), induced by prooxidants (10 µM FeSO4) in mice liver homogenate. The free radical scavenging activities of the extracts were determined by scavenging of the DPPH radical. Extracts also showed metal chelating activities and high antioxidant activity in the phosphomolybdenum assay. The high content of phenolics and flavonoids detected in aqueous extracts may be responsible for the antioxidant activity. Amongst the different rose genotypes, screened, Rosa moschata (musk rose) was found to carry slightly higher antioxidant potential, owing to its higher phytochemical content.

Hamadia Khurshid, Syed Mubashar, Shahid Iqbal Awan, Syed Rizwan Abbas, Muhammad Irshad

18.10.2018.

Original scientific paper

Extraction kinetics of saponins from quinoa seed (Chenopodium quinoa Willd)

Quinoa has higher protein content (11-16% m/m) and better amino acid profile than cereals and represents a valuable resource for healthy nutrition. The aim of this work was to study the saponins extraction kinetics during washing of soaked quinoa. The experimental curves of saponins content as a function of time was measured at water temperatures of 20, 40, 60, and 70ºC. A spectrophotometric method was proposed to determine total saponins content, while an unsteady state diffusional model was applied to this extraction problem, assuming strict internal control to the mass transfer rate. As a first analysis, the complete analytical solution for constant diffusion coefficient (Deff) using the initial radius (R0) provided an accurate predicted curve at each temperature. The diffusion coefficients (around 10−10 m2s-1), were correlated with temperature using an Arrhenius-type relationship to obtain an activation energy Ea  of 16.9 kJ mol-1.  The preliminary values of Ea and preexponential factor (D0) thus obtained were used as initial values of a second, more robust fitting where the whole dataset of saponins concentrations as a function of time for all temperatures. The Arrhenius equation was directly inserted into the diffusional solution. The following parameters were obtained: Ea= 17.2 kJ mol-1 and, D0= 3.232×107 m2 s-1, respectively with an overall r2=0.985. Saponins content agreed well with experimental values. As the equation is capable of predicting saponin extraction times for various operating conditions, it can be used within equipment design schemes.

R. M. Torrez Irigoyen, Sergio Giner

01.12.2017.

Professional paper

Examination of optimum test conditions for a 3-point bending and cutting test to evaluate sound emission of wafer during deformation

The purpose of this study was to investigate optimum test conditions of acoustical-mechanical measurement of wafer analysed by Acoustic Envelope Detector attached to the Texture Analyser. Force-displacement and acoustic signals were simultaneously recorded applying two different methods (3-point bending and cutting test). In order to study acoustical-mechanical behaviour of wafers, the parameters “maximum sound pressure”, “total count peaks” and “mean sound value” were used and optimal test conditions of microphone position and test speed were examined. With a microphone position of 45° angle and 1 cm distance and at a low test speed of 0.5 mm/s wafers of different quality could be distinguished best. The angle of microphone did not have significant effect on acoustic results and the number of peaks of the force and acoustic signal decreased with increasing distance and test speed.

Erdem Carsanba, Gerhard Schleining

01.12.2017.

Professional paper

Are we doing our homework? An analysis of food engineering education in Brazil

What is the profile of Food Engineering education in Brazil? Are we following the contemporary professional renewal trend? Driven by these questions, the present study analyzed data regarding 21 academic courses,which represent approximately 22% of the total bachelor’s degree in food engineering courses offered in the country. Samples were defined considering a Brazilian annual ranking of undergraduate programs: very good (four stars) and excellent (five stars). Next, information was recovered from both the Brazilian Ministry of Education and institutional homepages of each analyzed program. The results suggest that food engineering programs exhibit relative identity, naturally due to their history and the path of each program and their faculty, shaping particularities in how fields of knowledge are constituted, in addition to their representativeness in the total workload of the program. However, initial analysis is suggestive regarding understanding that Brazil is not properly doing its homework, based on global movement, concerning food engineering education. The need to rethink Brazilian technical education, without culminating in additional workload, is emphasized, not only regarding new materials and technologies for learning and teaching, but also in terms of bringing a human and market approach. The achievement of this complex goal seems to be provided by the encouragement of student associations, transversal learning processes, and learning experiences outside the classroom as a means of improving undergraduate programs and human resources.

Vivian-Lara Silva, Fausto Makishi, Marcus Magossi, Izabel Cristina Freitas Moraes, Carmen Silvia Fávaro Trindade, Paulo José Do Amaral Sobral

18.10.2018.

Original scientific paper

Food safety implementation in the perspective of network learning

The food sector frequently faces difficulties in implementing food safety standards. Indeed, there are many barriers to appropriation of quality management standards which make effective implementation difficult for small and medium enterprises (SMEs), such as limited access to information, lack of financing and cognitive resources, food hazard perception, and insufficient access to adequately trained personnel. Consequently, one fundamental objective for practitioners such as managers, public bodies and development agencies is to help these food SMEs in improving their implementation capacity, which is usually done through the launch of different forms of collective initiatives such as associations, clubs, learning platforms, regional actions and other forms of collaboration. Globally speaking, the objective of these initiatives typically is to develop a step by step approach providing guidance on good practices associated with the implementation of these systems. The objective of the article is to explore and test the validity of this hypothesis, rooted in a general idea of “organizational network learning”: the capacity of SMEs to adopt new food safety schemes is seen as a whole and necessitates mobilizing, at the same time, 1) formal innovation networks, which bring cognitive resources and institutional credibility, and 2) the practice by managers of informal network activities through interactive exchanges of information, benchmarking, knowledge transfer and translation, and experiential learning.

Zam-Zam Abdirahman, Leslie D. Bourquin, LOIC SAUVEE, Deepa Thiagarajan

18.04.2018.

Original scientific paper

Fermentation of tender coconut water by probiotic bacteria Bacillus coagulans

Coconut water is currently being considered as an elixir for patients suffering from diseases like dengue and malaria as well as chikungunia to provide hydration properties to the body. It has become a popular beverage for many people owing to its palatability and high mineral content. In this study, the growth, survival and fermentation performance of the probiotic bacterium Bacillus coagulans in coconut water was assessed in order to produce a novel non-dairy, probiotic beverage. The species was characterized on the basis of morphology, physiology and biochemical parameters and its probiotic attributes were assessed. Batch fermentations were carried out for 2 days at a constant 37°C, thereafter the samples were subjected to microbiological and chemical analysis. The results suggested that the specie produced lactic acid and was acid and bile tolerant. The pH and titratable acidity of probiotic fermented coconut water were found to be 4.4 and 0.53 % lactic acid, respectively. The viscosity of fermented coconut water increased significantly from an initial 5.13 mPa.s to 5.35 mPa.s because of the increase in soluble solids content due to exopolysaccharide production by B. coagulans during fermentation. Also, the overall acceptability score of probiotic coconut water was higher than tender coconut water, suggesting its feasibility for use as a probiotic beverage.

Aishwarya Singh Gangwar, Aastha Bhardwaj, Vasudha Sharma

18.04.2018.

Original scientific paper

Estimating the risk of phthalates exposure via tea consumption in general population

Four common phthalic acid esters (PAEs) levels in tea fusions samples prepared from three types of tea bags (green, black and white) of ten commercial brands were extracted from the infusions by a dispersive liquid-liquid micro extraction method and determined by GC-MS. PAEs were not found in white tea samples. Residue levels of total phthalic acid esters (TPAEs) in black and green teas showed no significant difference (median=367.5, Interquartile range=244.7-667.5 and median=381, Interquartile range=188.7-688.2µg/kg respectively). DEHP levels in green teas were significantly higher than those in black teas (Median= 93.5 and 204 respectively). Total phthalate esters (TPAEs) levels in flavored teas were about two-fold higher than in non-flavored teas. The four commercial brands tested contain significant levels of DEHP when compared to other brands. Essential oils and essences that were added to tea for improvement of color and taste could be the main sources of PAEs contamination.

If oral absorption of phthalates were assumed to be 100%, the maximum daily exposure levels to TPAEs via tea consumption (due to consumption of 5 cups of tea prepared from the tea containing the highest levels TPAEs) were estimated to be 230e−4 µg/kg bw/Day, which are far lower than the regulation levels set by the expert panels on regularly toxicity. 

Mohammad Mehdi Amin, Foruz Rastegari, Parinaz Poursafa, Karim Ebrahim

18.04.2018.

Original scientific paper

Extraction and characterisation of cellulose nanocrystals from pineapple peel

The potential of pineapple peel as a source of cellulose nanocrystals was evaluated. Peels skin from fresh-cut fruit was used as raw material. These residues were purified to remove pigments, lipids and hemicellulose, and a bleaching process for delignification was carried out for 4-6 h. All resulting products were characterised for their lignin, hemicellulose, cellulose and ash contents using standard techniques. Dry matter at the end was low (ca. 50%) compared with the raw material (ca. 90%). The process applied resulted in ca. 20% (m/m) of purified cellulose (ca. 80% purity), with ineligible levels of lignin and hemicellulose present, especially when using 6h of bleaching. The purified cellulose was subject to acid hydrolysis for nanocrystal extraction with two testing times, 30 and 60 minutes. These cellulose nanocrystals had small sizes (< 1000 nm), with high variability and negative zeta potential values. The time of extraction did not affect the nanocrystals’ chemical and physical properties. The use of 6 h of bleaching treatment during purification was shown to be more effective than 4 h. Pineapple peel was demonstrated to be a good source of cellulose for the production of cellulose nanocrystals. 

Ana Madureira, Tugba Atatoprak, Duygu Cabuk, Flavia Sousa, Manuela Pintado, Robert C. Pullar

Indexed by