Current issue

Issue image

Volume 13, Issue 2, 2024

Online ISSN: 2182-1054

Volume 13 , Issue 2, (2024)

Published: 18.10.2024.

Open Access

All issues

More Filters

Contents

18.04.2020.

Original scientific paper

Flax seeds and finger millet enriched functional rusk

Bakery products are generally made up of refined wheat flour that may be deficient in both fibre and essential fatty acids. In this study α-linolenic acid and fibre enriched rusk using flax seeds and finger millet were developed. The proportions of finger millet, flax seed and wheat flours were optimized using Response Surface Methodology (RSM). On the basis of fibre and ALA content and baking quality characteristics of rusk 13.13%, 6.0% and 80.6% of finger millet, flax seed and wheat flours, respectively was finalized. The developed rusk contained 4.81% fibre and 1.36% α-linolenic acid. Wet and dry gluten content, SDS sedimentation, falling number, dough raising capacity of yeast and baking time of mixed flour of these components were statistically (p>0.05) similar to that of wheat flour (control). However, higher loaf weight and lower loaf height was observed in mixed flour rusk in comparison to control rusk. α-linolenic acid and fibres enriched rusk were developed with similar quality parameters and improved functional properties.

Amit Lohan, Ravinder Kaushik, Vikas Bansal, Kamal Gandhi

01.12.2019.

Professional paper

Evaluation of growth and cereulide production by Bacillus cereus isolated from cooked rice

Conditions influencing Bacillus cereus growth and cereulide production, such as temperature and pH, were evaluated at varying incubation periods. The growth and cereulide production at different temperatures and pH values ranging from 10 to 40 ºC and 5.0 to 8.5, respectively showed that the temperature from 20 to 30 ºC and at pH from 6.0 to 7.0 gave the optimum growth and cereulide production by B. cereus SA105. pH below 6.0 resulted in reduced growth and cereulide production. Cereulide production increased along with the incubation period, and maximum cereulide titre (ng/mL) of 1219.1±8.90 was obtained after 6 days of incubation at 30 ºC and pH 6.5 under static conditions. There was no quantifiable toxin at incubation temperatures of 10 and 40 ºC by B. cereus SA105. This work further reveals that B. cereus growth and cereulide production was significantly affected by temperature and pH in relation to the incubation period. Furthermore, the findings of this study will serve as a means for reducing the diversity of emetic toxin-producing B. cereus population in food and food products, thus preventing food poisoning.

Damilola O. Seyi-Amole, Abiodun A. Onilude, Dasari S. Rani, Prakash M. Halami

24.02.2021.

Original scientific paper

Effect of Taro (Colocasia esculenta) Enrichment on Physicochemical and Textural Properties of Cake

Taro is a plant widely produced in tropical areas for its underground corms and it is used mainly as a vegetable. Its physicochemical, sensory properties and health benefits led to its use in value-added products. The cake is a high value-added bakery product and it needs a lower amount of gluten protein, therefore, taro flour (TF) was supplemented in wheat flour (WF) at different levels (10, 20, 30 and 40%). In connection with this, the incorporation of taro flour into wheat-based products has been reported to increase their nutritional and textural quality. The taro-supplemented cake showed higher mineral and fiber content, however, reduced caloric value. It was observed that taro supplementation reduced gluten and protein content and had higher oil and water binding capacity, therefore suitable for cake preparation. Taro cake had improved texture and sensory characteristics in comparison to wheat cake. It can be concluded that addition of taro for cake preparation improves nutrition and quality characteristics, therefore, it can be recommended to use taro for cake preparation.

Anuj Saklani, Ravinder Kaushik, Prince Chawla, Naveen Kumar, Mukul Kumar

24.02.2021.

Original scientific paper

Study of Antimicrobial, Antioxidant and Cytotoxicity Properties of Selected Plant Extracts for Food Preservative Applications

An attempt has been made to evaluate antimicrobial, antioxidant and cytotoxicity properties of extracts from onion (Allium cepa L.), garlic (Allium sativum), leaves of guava (Psidium guajava), papaya (Carica papaya), tea (Camellia sinensis), baen (Avicennia alba) and keora (Sonneratia apetala), respectively to apply as natural preservatives for tomatoes. The air-dried plant materials of the respective plant species were subjected to ethanol-methanol extraction, concentrated and stored at 4 °C before use. The extracts were dissolved in 95% ethanol for analysis of antioxidant and antimicrobial properties. Of the extracts tested, tea extracts showed the highest zone of inhibition against several pathogenic bacteria (E. coli 35.0±3.2 mm; P. aeruginosa 29.3±2.6 mm; S. typhi 28.4±2.1 mm and S. pyogenes 27.7±3.7 mm) using the disc diffusion method. In regard to DPPH free radical scavenging assay, keora and guava extracts showed the highest percentage of radical scavenging activity with the values of 89.64± 0.18 and 89.39± 0.88, respectively, which were in agreement with higher total antioxidant capacity (TAC) of these extracts obtained by the phosphomolybdenum method. Brine shrimp lethality bioassay for cytotoxicity assessment showed LC50 of 132.54 ± 18.99 µg/mL for the leaf extract of keora which was found to be most toxic among all studied extracts. The initial results indicated that the extracts could be used for food preservative applications based on the antimicrobial, antioxidant and cytotoxicity properties of the tested extracts. However, efficacy, stability and safety issues need to be addressed with both in vitro and in vivo studies.

Md. Nazrul Islam, Md Nazrul Islam, Wahidu Zzaman, Md Morsaline Billah

24.02.2021.

Original scientific paper

Effect of Emulsifier Diacetyl Tartaric Acid Ester of Mono- and Diglycerides (DATEM) and Enzyme Transglutaminase on Quality Characteristics of Rice Bran Croissants

Rice bran (RB) is a good source of dietary fibre. Addition of rice bran into croissant interferes with the gluten formation of dough and hence affect the physicochemical properties of croissant. The effect of RB addition on physicochemical properties of croissant were determined by using 0%, 10% and 15% RB. Besides, additives such as emulsifiers and enzymes can be used in pastry to enhance the physicochemical properties of croissant. Diacetyl tartaric acid ester of mono-diglycerides (DATEM) and transglutaminase (TGase) were used respectively on 0%, 10% and 15% RB to investigate the effect of such additives on physicochemical properties of croissant. Increased % RB and DATEM, produced a significant decrease in specific volume, together with a significant increase in colour, hardness and chewiness. With increased % RB, TGase caused significant increase in colour, hardness and chewiness but significant decrease in specic volume. The overall moisture sorption isotherm curves of the croissant belong to the Type III isotherm, also known as Flory-Huggins Isotherm (J-shaped). The critical aw obtained from the Guggenheim-Anderson-de Boer (GAB) equation showed that the shelf life of croissants were not positively impacted by the addition of DATEM and TGase and the addition of RB did not cause any significant positive effects on quality characteristics of croissants.

Wan Zunairah Wan Ibadullah, Aw Ying Hong, Mahmud Ab Rashid Nor-Khaizura, Nor Afizah Mustapha, Z. A. Nur Hanani, Mohammad Rashedi Ismail-Fitry, Anis Shobirin Meor Husin

24.02.2021.

Original scientific paper

Chemical Characteristics and Sensory Properties of Novel Snacks Produced with Okara Fortified with Omega-3 from Fish Oil

The aim of the present work was to develop a new soy-based food product and evaluate its chemical and sensory properties. A soy-based snack was mixed with rice (Oryza sativa), fortified with eicos-apentaenoic acid (EPA) and docosahexaenoic acid (DHA) Omega-3 fatty acids from sh by-products in encapsulated and emulsion form. Soy beans were subjected to grinding processes, maceration in pure distilled water, filtration and pasteurization, to obtain vegetable drinks and generate solid residue. Finally, a sensory analysis of the product obtained was carried out. The snacks protein content was around 17%. From the sensory evaluation, it could be concluded that the snacks with 50% of okara had great acceptability and the addition of Omega-3 was also acceptable. So, okara represents an excellent raw material that can be utilized for dietary protein fortification. On the other hand, it proposes based on soy and fish by-products allow sustainable development and contribute to the economy of each sector.

Trinidad Sandra Álvarez, Daniela Lorena Lamas

01.12.2018.

Professional paper

Study of the self-stabilization ability of Tzatziki (a traditional Greek ready-to-eat deli salad)

Traditional Greek yogurt-based salad Tzatziki is one of the most popular ready-to-eat deli salads in Greece. The objective of this study was to estimate the microbial stability of Tzatziki, with and without chemical preservatives, using a rapid method. Determination of the microbial count was carried out using the bioluminescence method (ATP) and traditional microbiological analysis, plate-counting method (CFU) in various batches of the final product of Tzatziki. The results showed that the Tzatziki salad without preservatives initially gave higher relative light units (RLU) values (79,532) than the same salad with preservatives (43,198) because the potassium sorbate and the sodium benzoate, used in recipe, appeared to suspend the action of microorganisms. After incubation in two different substrates, MacConkey and Sabouraud, the Tzatziki salad without preservatives gave higher RLU values (9,488 and 16,176, respectively) than the salad with preservatives (12,780 and 12,005, respectively). In the two selective substrates, differences appeared between the two methods of microbial count (RLU and CFU). While RLU values were roughly at the same level, the CFU values presented significant differences (p < 0.05). It was also shown that there was a strong correlation (R2 = 0.93-0.95) between bacterial counts estimated by traditional CFU and ATP methods. As expected, the dominant microbial population in Tzatziki was Lactobacillus spp., originated from yogurt. Coliforms and yeasts were not able to survive in this environment. Generally, according to the results, Greek traditional Tzatziki salad was a microbial stable product and the bioluminescence method could be a rapid method to determine its microbial state.

Stavros Lalas, Vassilis Athanasiadis, Ioanna Karageorgou, Eleni Bozinou, Vassilis G. Dourtoglou

01.12.2018.

Professional paper

Moisture sorption isotherm and thermodynamic properties of jamun (Syzygium cumini L.) powder made from jamun pulp and seed

The present work aimed to: i) find the suitable proportion, based on sensory evaluation, of microwave-convective hot air dried jamun (Syzygium cumini L.) pulp and seed kernel powder to be mixed for the preparation of jamun powder (JP); ii) generate and model the moisture sorption isotherm (MSI) of JP; and iii) estimate net isosteric heat of sorption (qst), spreading pressure (φ), net integral enthalpy (Qin), and net integral entropy (Sin). To formulate JP, the proportion (w/w, db) comprising 2% kernel and 98% pulp powder was the most desirable. The Peleg model was the best fit to MSI of JP. The qst decreased following linear relationship from 11.02 kJ. mol-1 at 5% equilibrium moisture content (EMC) to 0.27 kJ. mol-1 at 30% EMC. The φ increased with increase in water activity and decreased with increase in temperature from 25 ºC to 35 ºC, and the values of φ at 45 ºC were even higher than at 25 ºC. Net integral enthalpy (Qin) initially decreased till 6% moisture content in JP and displayed an increasing trend with further increase in moisture content. On the contrary, Sin, kept on decreasing continually with increasing moisture content. The moisture zone of 7-11% was considered safe for storage for storage of JP within the temperature range of 45-25 ºC.

Indira Dey Paul, Madhusweta Das

01.12.2018.

Professional paper

Moisture sorption isotherm and thermal characteristics of freeze-dried tuna

Water activity is considered an important factor in assessing the stability of food. Understanding the relationship between water activity and equilibrium moisture content (moisture sorption isotherm) benefits food processing in terms of modeling of drying and estimation of shelf life. In addition, glass transition helps to quantify molecular mobility which helps in determining the stability of food. The aim of this study was to determine the moisture sorption isotherm and thermal characteristics of freeze-dried tuna. These characteristics will help in determining the monolayer moisture and glassy state of the product, at which food is considered most stable. Moisture sorption isotherm at 20°C and thermal characteristics (over a wide temperature range i.e. from -90 to 250 °C) of freeze-dried tuna flesh were measured. Isotherm data were modeled by BET (Brunauer-Emmett-Teller) and GAB (Guggenheim-Anderson–De Boer) models. The GAB and BET monolayer water values were determined as 0.052 and 0.089 g g-1 dry-solids (dry-basis), respectively. In the case of samples at moisture contents above 0.10 g g-1 (wet basis), DSC (Differential Scanning Calorimetry) thermograms showed two-step state changes (i.e. two glass transitions), one exothermic peak (i.e. molecular ordering) and another endothermic peak (i.e. solids-melting). However, the sample at moisture content of 0.046 g g-1 showed three-step state changes (i.e. three glass transitions). The multiple glass transition could be explained by the natural heterogeneity of tuna flesh and inhomogeneity due to molecular incompatibility of the different compositions. The moisture content did not affect the first glass transition temperature nor the exothermic peak (p>0.05), whereas the third glass transition temperature decreased (i.e. plasticized) with increasing moisture content (p<0.05). The solids-melting peak temperature decreased, and enthalpy increased with decreasing moisture content (p<0.05).

Mohammad Shafiur Rahman, Mohammed Khalfan Al-Khusaibi, Kutaila Abbas AL-Farsi, Ismail Mohamed Al-Bulushi, Aisha Abushelaibi, Nasser Al-Habsi

01.12.2018.

Professional paper

Use of response surface methodology (RSM) for composite blends of low grade broken rice fractions and full-fat soybean flour by a twin-screw extrusion cooking process

In this study, seventeen (17) composite blends of broken rice fractions and full-fat soybean, formulated using response surface methodology and central composite design within a range of barrel temperatures (100-140 °C), initial feed moisture content (15-25%) and soybean composition (8-24%), were extruded with a twin-screw extruder and the expansion and color indices were optimized. The results indicated a significant (p<0.05) effect of extrusion conditions on the responses. Fitted predictive models had coefficients of 88.9%, 95.7%, 97.3%, 95.4% and 95.2%, respectively, for expansion index, bulk density, lightness, redness and yellowness. The p-value and lack-of-fit tests of the models could well explain the observed variability and therefore could be used to establish production setting for the twin-screw extruder. The optimum extrusion conditions were found to be 130 °C (barrel temperature), 20% (feed moisture level) and 23% feed soybean composition and optimum responses in terms of bulk density, expansion index, lightness, redness and yellowness chroma indices were 0.21 g cm-3, 128.9%, 17.1, 3.13 and 24.5 respectively. This indicates that optimum conditions can be established in twin-screw extrusion cooking of broken rice fractions and full-fat soybean composite blends that can result in product of low bulk and maximum expansion with a satisfactory light yellow product color that can be used to produce products that valorize broken rice and reduce qualitative postharvest loss.

Nahemiah Danbaba, Iro Nkama, Mamudu Halidu Badau

Indexed by