African nutmeg, a possible local substitute for a commercial food flavourant, remains largely underutilized in Nigeria. Its application potential in cookie production was investigated in this study. African nutmeg (Monodora myristica) seed flour (ANM) was produced using a standard method. The flour was substituted for vanilla flavour (VFL) in ratio of 0, 1, 2, 3, and 3.5 g and functional properties of the flour blends (water absorption capacity (WAC), oil absorption capacity (OAC), and bulk density) were determined, using standard methods. Cookies were developed and characterized chemically, physically (colour) and organoleptically using the AOAC method, a colourimeter and sensory panellists respectively. Data were analysed using ANOVA at p<0.05. Replacement of vanilla with African nutmeg had no significant effect on bulk density (0.62 g cm−3 -0.68 g cm−3 ), but significantly affected WAC (133-142 %) and OAC (147-156 %) of flour blends. Crude protein (9.44-15.49 %), crude fat (3.17-6.50 %), total ash (2-2.73 %) and crude fibre (0.12-0.23 %) contents of the cookie increased, whilst metabolizable energy (385.33-367 kcal) decreased. There were reductions in pH (6.83-6.53) and TSS (5.80-1.20). Brown index of the snack increased with addition of nutmeg. Antioxidant indicators (flavonoids, DPPH and phenol) varied among cookie samples. Antinutrients, saponin, tannin and oxalate, were within tolerable limits. All cookie samples were judged acceptable by the panellists, with SLZ being the most acceptable. An acceptable and nutritious snack was produced at 100 % replacement. M. myristica seed could serve as substitute for vanilla in the production of cookies and other related snacks.

Native starch was extracted from nine germplasm collections of Araucaria angustifolia seeds in aqueous medium and they were characterized by Pasting Properties (RVA), X-ray Powder Diffractometry (XRD) and Scanning Electron Microscopy (SEM). The gelatinization process of each sample was evaluated at different ratios of starch:water by Differential Scanning Calorimetry (DSC). A slight displacement in the gelatinization curves was observed for the pinhão starches prepared with different amounts of water. With an increase in water content, most of the samples presented a decrease in the peak, the conclusion temperatures, and the range of gelatinization temperatures, while the enthalpy did not follow a standard behavior. A displacement or a narrowing of the gelatinization temperature range occurred with increasing water content. Pinhão starch showed pasting temperature in the range of 60-67 o C and there were differences in the pasting properties and degree of relative crystallinity between the analyzed samples. The C-type diffraction pattern was found for all the samples and the morphology of starch granules was similar, with oval and round shapes. Therefore, different characteristics were found among starches from nine germplasm collections, encouraging the protection of the biological diversity of selected species, aiming at future applications.

The objective of this work was to study the effect of osmotic drying, using different hypertonic solutions (sucrose and sodium chloride), on physicochemical characteristics of pansies (Viola Ö wittrockiana). The same treatments were applied to lettuce to compare the behavior of flowers with other vegetables. Pansies’ superhydrophobic surface structure, called papillae, increased the resistance to exchanges with hypertonic solutions. No weight loss was observed after most treatments (sucrose: between 2.2 and 6.8 %; NaCl: between -23.0 % and 1.5 %), aw maintained high values (> 0,94) and monomeric anthocyanins were preserved (fresh 0.10 and 0.19 mg Cy-3glu/g fresh matter for 20%/1 h in NaCl and 60%/1 h in sucrose). When applying more drastic conditions, as sodium chloride for more than 1 hour, undesirable textural and color changes were observed. For lettuce, all treatments caused osmotic dehydration, weight loss (ranged between -9.3 to -30.3 % for 80%/1 h in sucrose and 15%/1 h in NaCl) and a reduction in aw (< 0,97) and carotenoids, with sodium chloride causing more damage in visual appearance than sucrose. Therefore, immersion in osmotic solutions can be applied to lettuce but the desired effect was not achieved for pansies due to the morphological structure of the flowers’ epidermis.

The purpose of the study was to evaluate the effects of Syrian Kaissy olive oil (SKOO) adulteration and long storage periods on the basic quality indices namely, peroxide value (PV), acid value (AV), and absorbance of UV (K232, K270, ∆K and R (K232/K270) values). This study revealed that the quality indexes, including AV, PV, K232, K270 and ∆K values, of all SKOO specimens increased with increasing storage time. It was revealed that the K232, K270 and ∆K values of SKOO specimens stored for 1 and 2 years remained under the limits, established by International Olive Council (IOC), of 2.5, 0.22 and 0.01 units, respectively. While in some cases, the K232, K270 and ∆K values exceeded their respective limits after 8, 9 and 10 years of storage. The index of R (K232/K270) decreased with time of storage.

Green tea Camellia sinensis contains polyphenol that has antidiabetic activity. Mangrove leaves also contain polyphenol which potentially gives these leave antidiabetic activity. The aim of this research was to determine the ability of herbal green tea extract from white mangrove (Avicennia marina) leaves to decrease blood glucose level of diabetic Wistar rats (Rattus novergicus). The method used was experimental and involved giving a herbal green tea extract from white mangrove leaves with concentration of 100, 200 and 300 mg/200g BW/day, and positive control, i.e. glybenclamide (0.09 mg/200 g BW/day), to diabetic rats injected with Streptozotocin (STZ) and Nicotinamide (NA). The rats were observed on day 0, 5, 10 and 15. The results showed that the herbal green tea extract from white mangrove leaves decreased the blood glucose level of diabetic rats. The effective extract dose that decreased the blood glucose level of diabetic rats was 300 mg/200 g BW, which is comparable to the effect produced by glybenclamide (antidiabetic medicine). This dose could decrease the blood glucose level of diabetic rats to reach a normal blood glucose level after 20 days.

The increase in relative level of education and the growing middle-class income earners in Nigeria have made packaged food items attractive to consumers. These foods provide handy, nutritious and convenient food for consumers; however, they also come with public health concerns. From a policy perspective, food labelling can gauge consumers’ response to the safety conditions of packaged food. However, understanding consumers’ awareness and the use of food label information has attracted little research attention in many developing countries in sub-Saharan Africa. In this study, we investigated consumers’ awareness of the use of food safety labels in Lagos state, Nigeria. We used primary data collected using pretested structured questionnaire from 220 food shoppers who bought pre-packaged foods. A two-stage sampling technique was used to select the respondents. Consumers’ awareness and use of food safety information was revealed using descriptive statistics; Ordinal Regression Analysis was used to examine the socioeconomic factors determining the frequency of reading food safety labels. We found evidence of the influence of socioeconomic characteristics on how consumers read food labels. The study therefore recommends that there should be continuous awareness campaigns on the importance of food labels in ensuring safety and food producers should make sure their food labels are legible.

The aim of this work was to study the effect of UV-C radiation on ultrasound assisted extraction (UAE) of cherry tomato bioactive compounds. Cherry tomatoes were exposed to two UV-C radiation doses (0.5 and 1.0 J cm−2 ) and stored at 20 ± 0.5 oC for 7 days. Next, they were lyophilized, and the bioactive compounds were extracted by UAE at 20 KHz. To evaluate the effectiveness of the extraction process of the bioactive compounds, a CCRD (central composite rotational design) was used together with RSM (response surface methodology), for extraction times from 4 to 12 minutes and concentrations (g of lyophilized product / L of ethanol) of 1:10, 1:20 and 1:30. The extracts obtained from the irradiated tomatoes presented 5.8 times more lycopene content than the controls and higher antioxidant activity was obtained for 4 and 8 min, in the concentrations 1:10 and 1:20 (m v −1 ). Through numerical model optimization, optimal extraction conditions were obtained. The results demonstrated that by previously irradiating tomatoes with UV-C light, the UAE yielded considerably higher amounts of lycopene and other bioactives. 

Drying conditions of black tea using superheated steam (SHS) were optimized based on a central composite design (CCD) of response surface methodology (RSM). The effects of independent variables (temperature and time) towards the total phenolic content (TPC), scavenging free radical ability, ferric-reducing antioxidant power assay and sensory attributes (infusion colour, aroma, flavour and astringency) were analysed using regression polynomial equations. Analysis of variance (ANOVA) showed that a quadratic model fitted the experimental design well, with a p-value less than 0.05 and a highest coefficient of 0.9474. The optimum drying conditions were achieved at 166.7oC and 21.2 minutes where the experimental values were in accordance with predicted values, with percentage errors (PE) less than 10%. Temperature (140oC – 180oC) was concluded to have the most significant effect and showed a positive direction in most responses. This effect was definitely able to support the application of a SHS dryer for the quality production (antioxidant and sensory properties) of black tea.

The use of acid whey in food formulations is one way to reduce the environmental problems associated with its disposal. In the present study, a new formulation of a drinking dessert was prepared using Lactic cheese whey, milk, xanthan gum at 4 levels (0, 0.1, 0.2 and 0.3%), resistant corn starch at 4 levels (0, 0.5, 1 and 1.5%), cocoa powder and sugar. Samples containing starch and gum had higher viscosity and were completely stable, with no syneresis and sedimentation after a month of storage at 4 oC. Samples containing 0.3% xanthan gum and 1% corn starch were considered as the desired drink based on sensory analysis. Study of the optimal flow behavior indicated that the drinking dessert is a non-Newtonian pseudoplastic fluid, and the Herschel-Bulkily model was the best model to describe the flow behavior. The pH of the synbiotic dessert containing L. GG was almost constant after 7 days of storage at 4 oC, while the pH of samples containing L. paracasei decreased by 0.7. The population of both probiotic bacteria decreased during storage time at 4 oC. The rate of decrease was higher for L. paracasei than L. GG. However, both contained >106 CFU mL−1 , which is necessary for the health benefits of probiotic bacteria.

Currently, nanoencapsulation of bioactive compounds is promising, and is one of the methods that has been proven very effective. The development of food-grade nanoemulsions is in a state of constant innovation due to the interesting features that this method of encapsulation has, such as small droplet size, kinetic stability and appearance. With this technology, it is possible to control some food properties, such as texture, taste and stability. In this article, we present a review of the most commonly used methods in the creation of nanoemulsions, the recent developments of these dispersions, the relevant applications of nanoemulsions in food matrices, the most commonly used food-grade materials and the functionality of nanoemulsions, which are designed primarily to encapsulate compounds with biological activity. Nanoemulsions have been shown to be effective in preventing degradation and improving the bioavailability of bioactive compounds, such as oil-soluble vitamins, antimicrobials, flavours and antioxidants. At the end of this article, facts of interest about acceptance issues and nanotechnology regulatory policies in the food industry are presented.