This study produced fish mortadella from Mechanically Separated Meat (MSM) of Nile tilapia added with animal fat. Three formulations were developed: M1 (MSM - 89 % and 5 % pork fat), M2 (MSM - 84 % and 10 % pork fat) and M3 (MSM - 79 % and 15 % pork fat). The elaborated products were tested for technological, physical, physico-chemical, microbiological and sensory parameters. The results showed that the fish mortadella were microbiologically stable with a particular texture for an emulsified meat product, attractive colour and characteristic flavour. All formulations met the expected identity and quality requirements. They also achieved good acceptance by the judges, in which formulation M1 may be highlighted for presenting an emulsion stability of 97 %, higher protein content (18.09 %) and lower lipids (16.31 %). In addition, it also reached higher mean scores for texture attributes and purchase intent. Therefore, it is possible to prepare fish mortadellas from tilapia MSM using less animal fat.

Lactobacillus spp. are lactic acid bacteria which have important implications for the food industry due to their fermentation capacities. The aims of this research were to produce fermented goat milks with Lactobacillus plantarum B7 and Lactobacillus rhamnosus D1, isolated from Brazilian artisanal cheeses, and to evaluate their physico-chemical, microbiological and sensorial qualities during 30 days of storage at 7°C. The goat milks, fermented by B7, D1, co-culture and a Lactobacillus casei Shirota control, possessed acceptable physico-chemical characteristics to meet fermented milk standards established by Brazilian legislation and maintain the viability of Lactobacillus spp. throughout the shelf life of the products. The products were microbiologically safe. D1 fermented goat milk gave higher consumer sensory quality acceptance and purchase intention (p<0.05) than other treatments, thus Lactobacillus rhamnosus D1 is recommended for fermented goat milk production.

Honey has long been used as a food and has been reported to have potential health benefits. In this work, total phenol content, colour and antioxidant and hepatoprotective activities of honey samples of different floral origins from the State of Hidalgo, Mexico were explored using in vitro assays. Hepatoprotective activity was measured by inhibitition of β-glucuronidase; gastroprotective activity was determined by inhibition of urease; antioxidant activity was evaluated by 2,2'-Azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 2, 2-diphenyl-1-picrylhydrazyl (DPPH) methods. All the parameters showed significant differences (p<0.05) among honey samples. The total phenolic content ranged from 18.02 to 102.77 mg GAE 100 g-1. The colour ranged from extra light amber to dark amber. Inhibition of β-glucuronidase ranged from 23.70% to 36.00%, while urease inhibition ranged between 7.64% and 63.80%. The antioxidant activity by ABTS was between 44.68 and 441.56 mg AAE 100 g-1, and DPPH showed activities ranging from 35.64 to 573.06 mg AAE 100 g-1. All honey samples contained bioactive compounds and displayed functional properties; therefore, the honeys from this region of Mexico offer attractive characteristics for their potential use in the food industry.

The aim of this study was to investigate the influence of raw chicken meat content on the rheological properties and 3D printability of minced meat mixtures using different concentrations of raw and cooked chicken meat. The meat mass contained yolk, crushed ice, lean raw meat and cooked meat with a high concentration of connective tissue. The concentrations of raw meat added to cooked meat as a percentage of the total weight of meat were 0; 30; 40; 50; 60; 70 and 100. To determine the rheological properties, amplitude sweep and frequency sweep were carried out with a Rheostress RS 300 (Thermo Fisher Scientific Inc.). Cubes were printed, and the printability and optical impression were evaluated using grades from 1-5. The results showed that rheological properties had a strong influence on the printability of meat mass and it is necessary for G' (storage modulus) at the LVR (linear viscoelastic region) to be higher than 7000 Pa. The complex viscosity |η*| should be higher than 170 Pa, at a shear stress τ = 10 Pa, and a frequency f = 10 Hz used to guarantee sufficient solidity.

Other than the edible oils extracted from the Acrocomia aculeata fruit, there is a growing interest in the palm to generate other high value-added products. Relatively high amounts of carotenoids (up to 378 mg kg-1) have been found in the esculent oils mechanically obtained from the fruit mesocarp. From industrial application perspectives, several processes have been proposed to modify native vegetable oils to yield high functional properties of structured lipids. For interesterified products, the thermal effects of industrial reactors are crucial in reaction mechanisms. The present study has taken into account previously estimated kinetic parameters for the overall disappearances of all-trans β-carotene in the Acrocomia aculeata oil (ko= 2.6 x 10-4 min-1; Ea = 105.0003 kJ mol-1; ΔH = 9.8 x 104 J kg-1) to develop a continuous stirred tank reactor (CSTR) kinetic treatment that obeys first-order kinetics. A system of ordinary dierential equations - mass and energy balances - was solved by the 4th order Runge-Kutta method (GNU Octave software). Under research conditions related to interesterification processing (2 h; 393.15 K), the initial concentration of carotenoids (around 11%) showed no significant decrease. Overall, realistic processing effects and conditions have been assessed, integrating results and knowledge, improving prospects of Acrocomia aculeata as a promising source of high-quality raw material, for producing functional ingredients and food with nutraceutical properties.

Gari (roasted fermented cassava grits) is the most popular product consumed in West Africa and an important food product in the diet of millions of people in developing countries. The study investigated the effect of packaging materials (PM) and storage periods on the functional and pasting properties of Gari produced from white-fleshed cassava roots and sensory attributes of the cooked Gari dough (eba). Gari was produced using the standard method and packaged in a polypropylene woven sack (PP) and polyvinyl chloride container (PVC). Gari was stored for 24 weeks at room temperature and sampled at four-week intervals for functional and pasting properties, and sensory evaluation of the eba, using standard methods. The results showed that the storage periods significantly affected all the functional (except swelling power) and pasting properties of the Gari, and PM had no significant (p>0.05) effect on the functional (except bulk density) and pasting properties. Also, the PM had no significant effect on the sensory attributes of the eba except for the mouldability (p<0.05). The setback viscosity of the Gari packaged in PVC had a significant (p<0.05, r= -0.58) negative correlation with the texture of the eba. The panellists preferred all the sensory attributes of the eba made from the Gari stored in PP compared to that made from Gari stored in PVC. Therefore, packaging Gari in PP may keep most of the properties preferred by consumers when stored for up to 5 months.

Consumer trends towards shelf-stable, safe, more natural and free from additives foods drove the need to investigate the commercial application of non-thermal food processing technologies. High pressure processing (HPP) is one such emerging technology where foods are generally subjected to high pressure (100-1000 MPa), with or without heat. Similar to heat pasteurization, HPP deactivates pathogenic microorganisms and enzymes, extends shelf life, denatures proteins, and modifies structure and texture of foods. However, unlike thermal processing, HPP can retain the quality of fresh food products, with little or no impact on nutritional value and organoleptic properties. Moreover, HPP is independent of the geometry (shape and size) of food products. The retention of food quality attributes, whilst prolonging shelf life, are enormous benefits to both food manufacturers and consumers. Researches have indicated that the combination of HPP and other treatments, based on the hurdle technology concept, has potential synergistic effects. With further advancement of the technology and its large-scale commercialization, the cost and limitations of this technology will probably reduce in the near future. The current review focuses on the mechanism and system of HPP and its applications in the processing of fruit, vegetables, meat, milk, fish and seafood, and eggs and their derived products.

Worldwide, there is a current need for new sources of vegetable oils. The natural content of total carotenoids in Acrocomia aculeata palm oil (up to 378 µg.g-1) surpasses that of many other tropical fruits, making it one of its main compositional characteristics. As far as can be verified, there is no available information on the degradation kinetics of carotenoids for A. aculeata oil, which is required to describe reaction rates and to predict changes that can occur during food processing. The present study considered prediction abilities that have emerged with the use of specific kinetic data and procedures to understand thermal processing better, as an essential unity operation. Two kinetic mechanisms were proposed to describe the overall thermal degradation of carotenoids in the oil; the first one consists of three reaction steps while the other presents only one-step reaction. Mass balance equations were numerically solved by a Backward Differentiation Formula technique. The kinetic parameters from both models were estimated through a hybrid optimisation method using the Particle Swarm Optimization and the Gauss-Newton method, followed by statistical analyses. The model with more than one reaction was shown to be overparameterized and was discarded. The model with a single reaction was highly suited to handle the experimental data available, and the dependency of its rate constant on temperature was expressed according to Arrhenius law. As far we know, this is the first time the kinetics of carotenoids thermal degradation in A. aculeata oil is investigated through modelling simulation.

Taro is a plant widely produced in tropical areas for its underground corms and it is used mainly as a vegetable. Its physicochemical, sensory properties and health benefits led to its use in value-added products. The cake is a high value-added bakery product and it needs a lower amount of gluten protein, therefore, taro flour (TF) was supplemented in wheat flour (WF) at different levels (10, 20, 30 and 40%). In connection with this, the incorporation of taro flour into wheat-based products has been reported to increase their nutritional and textural quality. The taro-supplemented cake showed higher mineral and fiber content, however, reduced caloric value. It was observed that taro supplementation reduced gluten and protein content and had higher oil and water binding capacity, therefore suitable for cake preparation. Taro cake had improved texture and sensory characteristics in comparison to wheat cake. It can be concluded that addition of taro for cake preparation improves nutrition and quality characteristics, therefore, it can be recommended to use taro for cake preparation.

Barhi Dates are an important food and often consumed and sold in the market during the stage Khalal, when the colour is yellow and their taste is sweet with the disappearance of their astringent taste. During the Khalal stage, these dates become physiologically mature with gives the sweet taste. For this reason, they are sold and consumed in a short period of time before these fruits turn into Rutab, a stage at which they lose that distinguishing characteristic. The high moisture, rapid ripening, and delays in transportation or improper storage conditions quickly result in Rutab stage. Thus The Khalal stage lasts for a short time until the fruits get ripe. In the present study, Barhi Khalals were packaged in air (control) and by two types of modified atmosphere packaging: MAP A (5% O2+ 20% CO2 and 75% N2) and MAP B (40% O2+ 20% CO2 and 40% N2). Afterwards, all samples were stored at 5°C for 30 days. On days zero, 10, 20 and 30 of storage, the fruits were evaluated in terms of the changes in the quality indices of weight loss, colour, Total Soluble Solids (TSS), and firmness of the fruits and sensory features. The results showed that the minimum weight loss was 0.45% in modified atmosphere packaging, especially with MAP A and the minimum increase in the TSS was 37.35 Brix° after 30 days of the storage. On the other hand, the results for firmness, colour, and sensory evaluation were better with control packaging.