A second nutrition transition seems to be emerging towards more plant-based diets, curbing meat consumption in developed countries at the beginning of the 21st century. This shift suggests that rational arguments tend to influence an increasing number of individuals to adopt vegetarian diets. This work aimed to understand and simulate the impact of different types of messages on the choice to change food diets at the individual level, and the impact of the diffusion of opinions at the collective level. It provided two results: (1) a network of arguments around vegetarian diets is modelled using an abstract argumentation approach. Each argument, formalized by a node, was connected with other arguments by arrows, thus formalizing relationships between arguments. This methodology made it possible to formalize an argument network about vegetarian diets and to identify the importance of health arguments compared to ethical or other types of arguments. This methodology also identified key arguments as a result of their high centrality in being challenged or challenging other arguments. The results of constructing this argument network suggested that any controversy surrounding vegetarian diets will be polarized around such high centrality arguments about health. Even though few ethical arguments appeared in our network, the health arguments concerning the necessity or not of animal products for humans were indirectly connected with ethical choices towards vegetarian diets; (2) an agent-based simulation of the social diffusion of opinions and practices concerning meat consumption is then introduced. The purpose of this simulation was to capture the balance of vegetarian vs. meat-based diets. It contributes to modelling consumer choices by exploring the balance between individual values and external influences such as social pressure, communication campaigns and sanitary, environmental or ethical crises.

This study produced fish mortadella from Mechanically Separated Meat (MSM) of Nile tilapia added with animal fat. Three formulations were developed: M1 (MSM - 89 % and 5 % pork fat), M2 (MSM - 84 % and 10 % pork fat) and M3 (MSM - 79 % and 15 % pork fat). The elaborated products were tested for technological, physical, physico-chemical, microbiological and sensory parameters. The results showed that the fish mortadella were microbiologically stable with a particular texture for an emulsified meat product, attractive colour and characteristic flavour. All formulations met the expected identity and quality requirements. They also achieved good acceptance by the judges, in which formulation M1 may be highlighted for presenting an emulsion stability of 97 %, higher protein content (18.09 %) and lower lipids (16.31 %). In addition, it also reached higher mean scores for texture attributes and purchase intent. Therefore, it is possible to prepare fish mortadellas from tilapia MSM using less animal fat.

The aim of this study was to investigate the influence of raw chicken meat content on the rheological properties and 3D printability of minced meat mixtures using different concentrations of raw and cooked chicken meat. The meat mass contained yolk, crushed ice, lean raw meat and cooked meat with a high concentration of connective tissue. The concentrations of raw meat added to cooked meat as a percentage of the total weight of meat were 0; 30; 40; 50; 60; 70 and 100. To determine the rheological properties, amplitude sweep and frequency sweep were carried out with a Rheostress RS 300 (Thermo Fisher Scientific Inc.). Cubes were printed, and the printability and optical impression were evaluated using grades from 1-5. The results showed that rheological properties had a strong influence on the printability of meat mass and it is necessary for G' (storage modulus) at the LVR (linear viscoelastic region) to be higher than 7000 Pa. The complex viscosity |η*| should be higher than 170 Pa, at a shear stress τ = 10 Pa, and a frequency f = 10 Hz used to guarantee sufficient solidity.

Other than the edible oils extracted from the Acrocomia aculeata fruit, there is a growing interest in the palm to generate other high value-added products. Relatively high amounts of carotenoids (up to 378 mg kg-1) have been found in the esculent oils mechanically obtained from the fruit mesocarp. From industrial application perspectives, several processes have been proposed to modify native vegetable oils to yield high functional properties of structured lipids. For interesterified products, the thermal effects of industrial reactors are crucial in reaction mechanisms. The present study has taken into account previously estimated kinetic parameters for the overall disappearances of all-trans β-carotene in the Acrocomia aculeata oil (ko= 2.6 x 10-4 min-1; Ea = 105.0003 kJ mol-1; ΔH = 9.8 x 104 J kg-1) to develop a continuous stirred tank reactor (CSTR) kinetic treatment that obeys first-order kinetics. A system of ordinary dierential equations - mass and energy balances - was solved by the 4th order Runge-Kutta method (GNU Octave software). Under research conditions related to interesterification processing (2 h; 393.15 K), the initial concentration of carotenoids (around 11%) showed no significant decrease. Overall, realistic processing effects and conditions have been assessed, integrating results and knowledge, improving prospects of Acrocomia aculeata as a promising source of high-quality raw material, for producing functional ingredients and food with nutraceutical properties.

Gari (roasted fermented cassava grits) is the most popular product consumed in West Africa and an important food product in the diet of millions of people in developing countries. The study investigated the effect of packaging materials (PM) and storage periods on the functional and pasting properties of Gari produced from white-fleshed cassava roots and sensory attributes of the cooked Gari dough (eba). Gari was produced using the standard method and packaged in a polypropylene woven sack (PP) and polyvinyl chloride container (PVC). Gari was stored for 24 weeks at room temperature and sampled at four-week intervals for functional and pasting properties, and sensory evaluation of the eba, using standard methods. The results showed that the storage periods significantly affected all the functional (except swelling power) and pasting properties of the Gari, and PM had no significant (p>0.05) effect on the functional (except bulk density) and pasting properties. Also, the PM had no significant effect on the sensory attributes of the eba except for the mouldability (p<0.05). The setback viscosity of the Gari packaged in PVC had a significant (p<0.05, r= -0.58) negative correlation with the texture of the eba. The panellists preferred all the sensory attributes of the eba made from the Gari stored in PP compared to that made from Gari stored in PVC. Therefore, packaging Gari in PP may keep most of the properties preferred by consumers when stored for up to 5 months.

The present study was conducted to develop non-cereal starch extruded products. The effects of feed moisture (15-21%), temperature (130-170 °C) and screw speed (120-160 rpm) were evaluated on the physical and functional properties of extruded snacks using response surface methodology. Feed moisture and screw speed increased the bulk density and hardness of extruded snacks. Significant decreases in water absorption index and increases in water solubility index were observed with increases in extrusion temperature. The best conditions were determined by numerical optimization. The optimized value for non-cereal snacks for feed moisture is 18.22%, temperature 155.96 °C, screw speed 142.75 rpm and, desirability is 0.75. Verification of results showed decent agreement between the responses of experimental values at certain optimum conditions and the predicted values.

The contamination of fresh produce with antibiotic-resistant bacteria is of particular concern as they are often eaten raw and can be a source for foodborne diseases. Tetracyclines have been largely used in humans, animals and plants which might have accelerated microbial resistance to them. Enterococci and Escherichia coli can be used as indicators to monitor contamination of the fresh produce with tetracycline-resistant bacteria. The investigation related to this issue is very scarce in Oman. This study aimed at identifying tetracycline-resistant enterococci and E. coli in fresh produce at the market place. Thirty-one enterococci and ten E. coli were isolated from local (Oman) and imported fruits and vegetables (N= 105). Using the standard Kirby-Bauer disc diffusion method, resistance to tetracycline was found in 6 (19 %) enterococci, isolated from cucumber, lettuce and radish, and 5 (50 %) E. coli, obtained from cabbage, lettuce and radish. Genetic analysis revealed the presence of tetracycline resistance genes, tet(A) and tet(K), in E. coli and tet(K), tet(L) and tet(M) in enterococci, including Enterococcus sulfureus, Enterococcus mundtii, Enterococcus casseli avus and Enterococcus faecalis. The integron integrase IntI 1 gene, which is known to facilitate the dissemination of antibiotic resistance genes among bacteria, was detected in 2 isolates of E. coli. These results demonstrated the capability of fresh produce to act as a potential source for disseminating tetracycline or possibly other antibiotic-resistant bacteria through the food chain. Thus, control strategies are needed to reduce exposure of the public to such microorganisms.

The aim of this work was to evaluate the effects of the addition of swine skin on the technological characteristics of mortadella formulations produced on industrial scale. The effects of concentrations of swine skin (1.5 to 5.5 %) and sodium chloride (2 to 3 %) on total protein, total fat, starch, moisture, water activity, sodium, pH and texture profile (hardness, adhesiveness, elasticity, cohesiveness and chewiness) were evaluated and compared to a mortadella formulation without swine skin addition. The mortadella formulations with addition of 3.5 to 5.5 % swine skin and 2 to 2.5 % sodium chloride are in accordance with Brazilian legislation and provided an increase of approximately 12 % in protein content, a decrease of 14 % in sodium content and a water activity less than 0.9488. The swine skin and sodium chloride provided stability to the mortadella and influenced its texture, mainly in hardness, elasticity and chewiness.

Brown rice puffing (unpolished rice) gives a more nutritious product compared to traditional puffed polished rice and reduces the cost of the product significantly, even though, the rice bran layer resists expansion during puffing. In the present study, brown rice was puffed in a microwave and hot-sand-bed after its pressure parboiling. Pressure parboiling parameters, steam pressure (196, 294, 392, 490 kPa) and steaming time (5, 10, 15 min), along with pre-conditioned moisture content (8, 10, 12 % wb) were studied and optimized for puffing characteristics (puffing percentage, expansion ratio, whiteness index, bulk density and hardness). All the experiments were carried out using a full factorial design. Statistical analysis showed there was a significant effect of processing variables on puffing characteristics. Optimized steam pressure, steaming time and pre-conditioned moisture content for microwave puffing were found to be 303.6 kPa, 14.25 min and 11.6% (wb) respectively, and for hot-sand-bed puffing to be 260.7 kPa, 15 min and 8% (wb) respectively.

Many innovative teaching and learning methods are used in higher level education including project-based learning (PBL). Since 2012 a PBL assignment project has been undertaken by master students of the Advanced Molecular Gastronomy module at Technological University Dublin (TU Dublin). The aim is to stimulate student learning and creativity by using Note by Note cooking in a PBL assignment while at the same time complying with the requirements of the annual International Note by Note contest which is held in Paris, France. Direct and indirect assessment methods were used to assign individual grades and to gather student feedback about the module. The direct methods were both formative and summative. The indirect method used was a student feedback questionnaire. Results to date (2012-2019) showed that 92% of learners successfully passed the module. However, further evaluation of individual assessment results revealed that most students achieved higher scores for finding and using resources, asking further questions and developing their own answers than for analysing, synthesising and evaluating information (P≤0.01). Overall students were happy with the module content and said that they learnt about Note by Note cooking, chemical compounds, researching, independent-thinking and perseverance. In future students should carry out a more in-depth analysis, synthesis and evaluation of information.