Current issue

Issue image

Volume 13, Issue 2, 2024

Online ISSN: 2182-1054

Volume 13 , Issue 2, (2024)

Published: 18.10.2024.

Open Access

All issues

More Filters

Contents

18.10.2021.

Original scientific paper

Characterization of total phenol and flavonoid contents, colour, functional properties from honey samples with different floral origins

Honey has long been used as a food and has been reported to have potential health benefits. In this work, total phenol content, colour and antioxidant and hepatoprotective activities of honey samples of different floral origins from the State of Hidalgo, Mexico were explored using in vitro assays. Hepatoprotective activity was measured by inhibitition of β-glucuronidase; gastroprotective activity was determined by inhibition of urease; antioxidant activity was evaluated by 2,2'-Azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 2, 2-diphenyl-1-picrylhydrazyl (DPPH) methods. All the parameters showed significant differences (p<0.05) among honey samples. The total phenolic content ranged from 18.02 to 102.77 mg GAE 100 g-1. The colour ranged from extra light amber to dark amber. Inhibition of β-glucuronidase ranged from 23.70% to 36.00%, while urease inhibition ranged between 7.64% and 63.80%. The antioxidant activity by ABTS was between 44.68 and 441.56 mg AAE 100 g-1, and DPPH showed activities ranging from 35.64 to 573.06 mg AAE 100 g-1. All honey samples contained bioactive compounds and displayed functional properties; therefore, the honeys from this region of Mexico offer attractive characteristics for their potential use in the food industry.

Alma Delia Hernández-Fuentes, David Chávez-Borges, Antonio de Jesús Cenobio-Galindo, Andrea Paloma Zepeda-Velázquez, Ana Cristina Figueira, Rubén Jiménez-Alvarado, Rafael Germán Campos-Montiel

18.10.2021.

Original scientific paper

Development of technology for the production of sausage produce using secondary collagen-containing raw materials

One of the main requirements for modern technologies is to expand the range of meat products by creating combined products with a balanced composition of food and biologically active substances. The purpose of the study was to develop a technology for the production of such combined meat products. The research used secondary meat raw materials of the meat processing industry: horse meat, flank and other beef muscle tissue of the second grade, which, after fermentation by a consortium of microorganisms consisting of the following cultures: Lactobacillus bulgaricus, Bifidumbacterium siccum, Staphilococcus carnosus, were used instead of the main meat raw materials in the production of sausages. The following indicators of ready-prepared products were studied: organoleptic properties, chemical, vitamin and mineral composition, toxicity and harmlessness, storage duration. The results showed that the use of this consortium of microorganisms in the production of sausage products made it possible to use secondary collagen-containing raw materials for processing. The positive influence of the proposed biotechnological method of processing meat raw materials on the organoleptic, physical-chemical, structural-mechanical, microbiological characteristics and biological value of the finished product was revealed. It was found that the use of a consortium of microorganisms increased the quality of finished products. In addition, the proposed technology has the potential to reduce the cost of production and increase the share of waste-free production in the meat processing industry.

Natalia Gizatova, Albert Gizatov, Liliya Zubairova, Irina Mironova, Azat Nigmatyanov, Yuliya Chernyshenko, Alexey Pleshkov

18.10.2021.

Original scientific paper

Lessons from Japan: promoting underutilized food crops through tourism

For the first time in the XXI century, the number of people suffering from obesity worldwide surpassed the number of undernourished people. For many developing countries, this presented a so-called "double burden" of coping for over- and under-nourishment. At a rate of more than 50% of the population in Malaysia being either overweight or obese, the country is facing the most severe dietary crisis in East Asia. Often recognized as one of the healthiest populations worldwide and having a blue zone, Japan has managed to set a yardstick for countries around Asia. Hence the purpose of this study was to uncover the capacity for contribution and successful integration of traditional vegetables into Japanese daily food practices. Semi structured interviews were conducted together with participating observation with key informants to help understand the role of women in preserving and safeguarding traditional vegetables also known as 'sansai' in terms of farming and food preparation. In order to solve the unhealthy eating patterns among Malaysians, it is timely to start appreciating the contributions of the older generation in terms of wild edible usage and preparatory methods which can help alleviate the double burden of malnutrition among the population.

RACHEL THARMABALAN

18.10.2021.

Original scientific paper

Characterization of pasteurized milk spoilage by electronic nose in relation to its selected quality parameters

Pasteurized fresh milk requires an accurate estimation of shelf life under various conditions to minimize the risk of spoilage and product losses. Milk samples were stored for 56 h in an oven at 25°C and for 15 days in a refrigerator at 4°C. Samples were analyzed using an electronic nose (e-nose), total bacterial count, titratable acidity and pH to determine the quality of milk. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were used to analyze e-nose data of milk stored at 25°C, and 4°C. A clear shift in quality was identified by the e-nose, which also appeared in the total bacterial count after 24 h and 12 days for storage at 25 and 4°C, respectively. On the other hand, titratable acidity exceeded the normal limits of 0.14 % - 0.21 % after 24 h for storage at 25°C (0.247 ± 0.006 %) and after 15 days for storage at 4°C (0.25 ± 0.01 %). If pH was a good indicator of quality for samples stored at 25°C, it showed no clear trends for samples stored at 4°C. Based on the microbial count data and e-nose output, the milk had a shelf life of 0.3 day (i.e. 8 h) when stored at 25°C. Shelf life was extended to 9 days when stored at 4°C.

Saleem Ehsan, Zahir Al-Attabi, Nasser Al-Habsi, Michel R. G. Claereboudt, Mohammad Shafiur Rahman

18.05.2021.

Original scientific paper

Thermal Degradation of β-Carotene from Macauba Palm: Mathematical Modeling and Parameter Estimation

Worldwide, there is a current need for new sources of vegetable oils. The natural content of total carotenoids in Acrocomia aculeata palm oil (up to 378 µg.g-1) surpasses that of many other tropical fruits, making it one of its main compositional characteristics. As far as can be verified, there is no available information on the degradation kinetics of carotenoids for A. aculeata oil, which is required to describe reaction rates and to predict changes that can occur during food processing. The present study considered prediction abilities that have emerged with the use of specific kinetic data and procedures to understand thermal processing better, as an essential unity operation. Two kinetic mechanisms were proposed to describe the overall thermal degradation of carotenoids in the oil; the first one consists of three reaction steps while the other presents only one-step reaction. Mass balance equations were numerically solved by a Backward Differentiation Formula technique. The kinetic parameters from both models were estimated through a hybrid optimisation method using the Particle Swarm Optimization and the Gauss-Newton method, followed by statistical analyses. The model with more than one reaction was shown to be overparameterized and was discarded. The model with a single reaction was highly suited to handle the experimental data available, and the dependency of its rate constant on temperature was expressed according to Arrhenius law. As far we know, this is the first time the kinetics of carotenoids thermal degradation in A. aculeata oil is investigated through modelling simulation.

Pedro Prates Valério, Amanda Lemette Brandão, Jesus Maria Frias Celayeta, Erika Cristina Cren

18.05.2021.

Original scientific paper

Effect of Retort Processing on Low Sodium Instant Noodle Seasoning Based on Oil-in-Water Emulsions

Increasing consumption of instant noodles with high sodium content could elevate the risk of cardiovascular disease. Making instant noodle seasoning in the form of an oil-in-water emulsion was expected to improve the perception of salty taste without increasing the use of salt. However, the oil concentration in the emulsion affects the perception. The addition of antioxidant and retort processing was needed to overcome the nature of the emulsion that was quite susceptible to oxidation and microbial contamination. Preliminary research determined the optimum concentration of oil and antioxidant based on physical characteristics, the perception/gustation of saltiness, and emulsion oxidative stability and the results were used for further research. The final part of the research determined the effects of retort processing on emulsion stability, the perception of saltiness, and the degree of microbial contamination. Three different oil concentrations (26, 27, and 28%) and three types of antioxidants (natural vitamin E, ascorbyl palmitate and mixed tocopherol) were applied to the instant noodle seasoning oil-in-water emulsions. The results showed that using 28% oil and mixed tocopherol had the most stability, was more viscous, and had optimum salty taste perception, which significantly extended the shelf-life of the emulsion compared with the others. Retort processing for 21.5 minutes in 123.5 °C was applied to the seasoning emulsion with 28% oil content and mixed tocopherol. Although, the microbial contamination was significantly reduced, neither the stability of emulsion nor the perception of salty taste was significantly changed by the process.

melanie cornelia, Angeline Apriliana, Irene Triyanti

18.05.2021.

Original scientific paper

Industrial Practice for Reducing Defective Sterile Milk Products Produced Using Overpressure Rotary Retorts

Indonesian consumers are fond of commercially sterilized milk as indicated by increasing product sales. High demand for products intensifies the need to increase productivity, generally achieved by minimizing product defects. This study aimed to reduce the number of defects in commercially sterilized milk produced using overpressure rotary retorts. Based on Pareto analysis, the percentage of defective products was 5.14% of which 2.37% were dented bottles. A cause-effect diagram (Ishikawa Diagram) was used to find the root cause of dented bottles. The pressure difference between the retort chamber (external pressure) and inside the product packaging (internal pressure), and the number of bottles stacked inside the retort basket (bottle density) were found as major factors for causing dented bottles. The internal pressure was 1.20 bar higher than the external pressure. By reducing the pressure difference to 0.40 bar, the percentage of dented bottles could be reduced to 0.79%. Applying the low-est bottle density (73% of the retort basket area occupied by bottles) during the sterilization process could decrease the number of dented bottles, however, it also increased the appearance of striped lids. The best conditions for sterilization (pressure difference = 0.40 bar; number of bottles/basket = 1938 bottles) which were used in the three-month full-scale production trial reduced the percentage of defective products from 5.14% to 2.24% of which 0.76% were dented bottles. Setting the retort pressure at 2.80 bar could avoid 52,920 defective bottles of commercially sterilized products per month.

Muhamad Wahyu Pamuji, Eko Hari Purnomo, Azis Boing Sitanggang

18.05.2021.

Original scientific paper

Consumers’ Perception and Consumption of Sunflower Oil in Kumasi, Ghana

Consumption pattern among indigenous groups is usually influenced by consumers' sociocultural and perceptual factors. This study employs the binary logit model to analyse the factors that influence the consumption of sunflower oil in Kumasi, Ghana. A cross-sectional approach was used to obtain data from 200 consumers who were selected using a multi-stage sampling method. The results showed that a majority (93%) of the respondents were aware of the availability of sunflower oil on the local market and a third (69.5%) had used it for cooking before. The respondents agreed with the perception statements that sunflower oil is healthy, expensive, reduces the risk of heart diseases and cancer and has better frying performance. The empirical results of the logit regression model showed that consumption of sunflower oil is influenced by household size, awareness of the product and perceptions on health benefits, price and frying performance of sun ower oil. The price of the oil was identified as the most important constraint to its use albeit it had no negative effect on its consumption. Investments in the production and promotional strategies on the use of sunflower oil should consider the significant variables that have influence on its consumption.

Fred Nimoh, Richmond Anaman, Alhassan Abubakar, Bortey Manison Bishop, Daniel Opoku Darko

18.04.2020.

Original scientific paper

Chemical constituents in leaves and aroma products of Nicotiana rustica L. tobacco

Nicotiana rustica L. (Aztec tobacco) is the only Nicotiana species, except common tobacco (N. tabacum L.), which is cultivated for tabacco products. The leaves of N. rustica, however, accumulate various specialized metabolites of potential interest. Therefore, the objective of this study was to evaluate certain classes of metabolites (by HPLC and GC-MS) in the leaves, the essential oil (EO), concrete and resinoid of N. rustica. Three pentacyclic triterpenes were identified in the leaves (by HPLC): betulin (252.78 µg g-1), betulinic (182.53 µg g-1) and oleanolic  (69.44 µg g-1) acids. The dominant free phenolic acids in the leaves (by HPLC) were rosmarinic (4257.38 µg g-1) and chlorogenic (1714.40 µg g-1), and conjugated forms of vanillic (3445.71 µg g-1), sinapic (1963.11 µg g-1), and syringic (1784.96 µg g-1). The major flavonoids in the leaves were luteolin (960.44 µg g-1), apigenin (880.66 µg g-1) and hyperosid (780.72 µg g-1). The GS-MS profiling of the EO identified 19 components and the major ones were phytol (43.68 %), solanone (5.54 %), cis-5-butyl-4-methyldihydrofuran-2(3H)-one (5.23 %), dihydro-β-ionone (4.25 %), α-ionene (3.54 %),and β-damascenone (3.03 %). The major volatiles in the concrete were  isoamyl alcohol (28.82 %), oxynicotine (9.02 %), phytol (7.80 %), 4-mеthyl-1-penthanol (6.33 %), cotinine (5.55 %) and 3-metyl-3-penthanol (4.09 %). Resinoid composition was dominant by nicotine (39.75 %), phytol (11.23 %), eicosane (4.88 %), diethyl phthalate (4.19 %), dibutyl phthalate (3.48 %) and solanone (3.27 %). Concrete and resinoid showed weak antibacterial activity . These results create grounds for considering N. rustica as a source to obtain aroma or other bioproducts.

Venelina Popova, Tanya A. Ivanova, Albena S. Stoyanova, Violeta V. Nikolova, Margarita H. Docheva, Tzveta H. Hristeva, Stanka T. Damyanova, Nikolay P. Nikolov

18.01.2020.

Original scientific paper

Textural, rheological and sensory properties of spreadable processed goat cheese

The aim of this work was to study the influence of the ripening degree of natural goat cheese on texture, rheological and sensory properties of processed cheese products. Processed cheeses were formulated using goat cheeses with 10, 20, and 40 days of ripening. We obtained four different formulations by varying the proportions of these cheeses in each formulation. The variation in major α, β, and para-κ casein fractions, rheological properties, and the texture of samples were determined, and a sensorial evaluation was carried out. Cheeses from Formulation 2 (50% cheese ripened for 10 days, 25% cheese ripened for 20 days and 25% cheese ripened for 40 days) had greater values of α and β –caseins, which is related to a greater content of intact casein resulting from a cheese with short ripening time. Hardness, adhesiveness and complex modulus (G*) decreased as the degree of ripening of the natural cheese (raw material) increased. Formulation 2 presented a G* value similar to that of the commercial processed cow cheese and the greatest firmness. Formulation 2 presented the characteristics we aimed to obtain, described as spreadable, slightly acid and salty cheese.

Laura Burgos, Nora Pece, Silvina Maldonado

Indexed by