A sustainable Short Food Supply Chain (SFSC) requires collaboration among all actors, which nowadays is facilitated by information and communication technologies (ICT). However, not all SFSC stakeholders network with others in this way, and it is not clear what will draw them to ICT interaction. A simple, user-friendly website, the SMARTCHAIN Innovation Platform, evolving since March 2019, may facilitate interaction and cooperation among SFSC stakeholders. This article presents the Platform's development and evaluates its efficacy and impact by analysing data from Google Analytics (GA) and other sources. Primary Platform features promote communication and information sharing: these are the 1) Innovation Hubs in 9 European countries, 2) Inventories including 150 SFSC innovations and 50 SFSC initiatives, 3) Resources databases of Publications and Weblinks, and 4) Training section. GA showed that visitors to the Platform increased slowly in the 16 months since its start, and the number of page views increased with the amount of time on the Platform. The most visited page of the Platform was the information-providing Innovation Inventory. Most Platform users were in partner countries of the SMARTCHAIN project, but not all Innovation Hubs had high numbers of users. Most users arrived at the Platform by direct link, but LinkedIn was the most important originating social network. Taken together, these data suggest growth potential for an easy-to-use website that provides useful and up-to-date information but little inclination for SFSC stakeholders to use an online Platform for communication.

This paper explores the challenges in meeting the regulatory requirements of short food supply chains in 9 European countries based upon findings from the European H2020 3-year project "SMARTCHAIN". The assessments of the barriers that small food producers face in meeting different regulatory requirements are presented. Drawing on the results of 10 multi-actor workshops that involved 124 participants, the most problematic policy frameworks for short food supply chains and key obstacles in different regulatory requirements are summarized. This research shows that current EU and national regulation is an obstacle to the development of short food supply chains, meaning that additional efforts are needed to tailor the regulations to small food producers involved in short supply chains. Furthermore, it is necessary to consider the introduction of more effective support measures for short food supply chains.

Blended learning refers to the use of conventional face-to-face learning experiences in combination with online education resources and practices. An increase in enrolments and a more diverse student body has intensified the demand to develop first-year teaching and learning pedagogies. Food science and technology lecturers must facilitate constructive learning in order to develop student skills, including critical thinking, teamwork, and self-directed learning. The aim of this investigation was to evaluate student perceptions of collaborative and blended learning. Students were exposed to various technology-enhanced pedagogical tools and face-to-face teaching strategies such as online academic journal reflections, video screencasts, group assignments, food processing practicals, and group crossword puzzles. A mixed-method survey consisting of multiple-choice, a 5-point Likert scale, and open-ended qualitative questions was administered via Blackboard. A total of 133 students were registered for the module, and 72.1% (n = 96) completed the survey. In this study, respondents felt they were prepared to complete the online group assignments (82%), which illustrates that they could learn the course material through collaboration. Moreover, 87% of the students agreed that they could keep up with the coursework in the blended format. Students recommended that there should be more lecture designed video screencasts, and they should be offered more opportunities to do oral presentations in this module. The respondents positively received collaborative and blended learning. The findings of this study, in general, affirm the merits of incorporating blended and collaborative learning in food science and technology curricula.

The effect of African Yam Bean (AYB) flour substitution on the nutritional, functional and pasting properties of yellow root cassava grits was investigated. Cassava grits were obtained by peeling, washing, cutting (5.5 cm thickness in cubes), soaking (72 h, 28±2 °C), dewatering, roasting (120 °C, 20 min), sieving and milling. Roasted AYB flour was obtained by cleaning, roasting (190 °C, 10 min), dehulling, milling and sieving (425 μm). Simple lattice design was used to generate different formulations, 100:0; 90:10; 80:20; 70:30; 60:40 and 0:100 of cassava grits and AYB flour, respectively. These were analyzed for chemical composition, amino acid profile, minerals, functional and pasting properties. Total ash, protein, β-carotene and hydrogen cyanide were in the ranges of 2.16-2.66%, 2.72-20.43%, 1.33 to 3.97 µg/g and 0.07-4.47 mg/kg, respectively. Total essential amino acids and total non-essential amino acids were in the ranges of 32.51-40.18% and 59.82-67.48%. Potassium, calcium, magnesium, iron, copper, zinc, manganese and sodium of the blends ranged from 338.00-646.75, 188.00-508.00, 358.00-532.50, 59.25-140.00, 0.12-0.19, 1.07-1.71, 7.25-38.25, 25.25-161.50 mg/100 g, respectively. Bulk density, water absorption capacity, swelling capacity and swelling index ranged from 0.67-0.81 g/ml, 151.05-503.29 g/ml, 1.67-5.68 g/g and 2.86-13.32%, respectively. The blends of yellow root cassava grits and African yam bean flour could provide nutritious food formulations and offer good potential for food security.

Brazil has a great variety of fruits which are rich in bioactive compounds, such as the genipap fruit. Both the peel and the pulp of genipap have beneficial components for health, making the study of this fruit important for the proper use of its functionalities. The objective of this work was the extraction of bioactive compounds from the peel and pulp of genipap by different techniques. Extraction processes were carried out using different devices (orbital incubator shaker, ultrasonic bath, and ultrasonic probe) and at different temperatures (40, 60, 70, 80 and 90 °C). The best process for extracting phenolic compounds from the pulp of genipap fruit was with the ultrasonic probe at 40 °C, which indicated the efficiency of applying the sound waves directly to the sample. Regarding the peel, the best method for extracting phenolic compounds was using the orbital incubator shaker at 80°C.

The coffee of Arabica Kintamani is one of the most popular coffees in the world due to its specific taste. The quality of coffee beans depends on the post-harvest and processing method. Dry processing and wet processing are the most popular methods used and each process produces different quality coffee beans. The objective of this research was to study and analyze various processing methods of coffee beans and to determine the best processing method to apply by the farmers and processors. This research consisted of three processing methods for the coffee namely dried processing (natural); wet processing; and semi-wet processing (honey). The research used a randomized complete design with one factor and five replications. The study showed that dry processing (natural) produced good quality coffee beans compared with wet or semi-wet processing, with significantly higher polyphenols content of 40.80 ± 0.053 mg GAE g−1 , approximately the same caffeine content (1.19 ± 0.016 %), significantly higher antioxidant activity (% DPPH) 89.53 ± 0.229 % with an EC50 equal to 102.44 ± 0.130 mg L−1 , similar lightness 13.63 ± 8.281 and a significantly lower moisture content of 7.54 ± 0.474 %. This indicated that dry processing could be used as an alternative processing method by farmers and processors due to it being easier, cheaper, with more efficient water use as well as giving a product contained the highest levels of polyphenols and antioxidant activity that are good for human health.

This research aimed to study the effect of sterility values on physical quality (drained weight, brown colour index, and texture) and sensory properties of canned Agaricus bisporus mushrooms processed at different retort temperatures (115, 121, and 130 °C) and processing times (2-97 minutes). Mushrooms in brine solution media packaged in 300x407 cans were heated in industrial-scale horizontal static retorts at different retort temperatures for specific processing times to reach different F0-values. The canning process was carried out following commercial production procedures in one of the mushroom canning factories. Measurement of heat penetration into the product was carried out using a protocol established by the Institute of Thermal Process Specialists (IFTPS), and the sterility values (F0) were calculated. Our results indicated that the physical and sensory properties of canned mushrooms were not only affected by sterility value but also by the combination of temperature and time used to process the product. At the same level of sterility, a higher retort temperature (130 °C) resulted in canned mushroom with a lower browning rate, an improved texture profile (decreased hardness, increased chewiness, and shear force), a sweeter taste, and increased intensity of umami taste. However, the canning process at a temperature of 130 °C resulted in a greater reduction of the drained weight as compared to that of canning at 115 °C and 121 °C.

The research aimed to study the effect of drying processes (spray and freeze drying), and feed concentrations (80%, 65% and 50% of plant in water, w/w) on physicochemical and microbiological characteristics of star gooseberry (Sauropus androgynus), ceylon spinach (Basella alba), and cowslip creeper (Telosma minor ). After drying, the powder recovery of herbal plant powders was up to 77.47%. The aw and moisture content of spray-dried powder (SDP) were lower than that of freeze-dried powder (FDP). The drying method did not significantly affect nutritional values of both powders, whereas the feed concentrations markedly affected the nutritional values of the powders. The fibre and fat contents of powder prepared from 80% feed concentration had the highest values (p<0.05). The dried star gooseberry powder was rich in protein (13.01-16.81%) and fibre (5.03-5.52%). The colour of FDP represented a smaller change than that of SDP. The dried powders prepared by 80% showed the highest solubility, up to 85.44%. The microbial counts of SDP were lower than that of FDP. The colour might well have been preserved by freeze drying, whereas a low moisture and microbial count were likely due to the spray drying.

A second nutrition transition seems to be emerging towards more plant-based diets, curbing meat consumption in developed countries at the beginning of the 21st century. This shift suggests that rational arguments tend to influence an increasing number of individuals to adopt vegetarian diets. This work aimed to understand and simulate the impact of different types of messages on the choice to change food diets at the individual level, and the impact of the diffusion of opinions at the collective level. It provided two results: (1) a network of arguments around vegetarian diets is modelled using an abstract argumentation approach. Each argument, formalized by a node, was connected with other arguments by arrows, thus formalizing relationships between arguments. This methodology made it possible to formalize an argument network about vegetarian diets and to identify the importance of health arguments compared to ethical or other types of arguments. This methodology also identified key arguments as a result of their high centrality in being challenged or challenging other arguments. The results of constructing this argument network suggested that any controversy surrounding vegetarian diets will be polarized around such high centrality arguments about health. Even though few ethical arguments appeared in our network, the health arguments concerning the necessity or not of animal products for humans were indirectly connected with ethical choices towards vegetarian diets; (2) an agent-based simulation of the social diffusion of opinions and practices concerning meat consumption is then introduced. The purpose of this simulation was to capture the balance of vegetarian vs. meat-based diets. It contributes to modelling consumer choices by exploring the balance between individual values and external influences such as social pressure, communication campaigns and sanitary, environmental or ethical crises.

This study produced fish mortadella from Mechanically Separated Meat (MSM) of Nile tilapia added with animal fat. Three formulations were developed: M1 (MSM - 89 % and 5 % pork fat), M2 (MSM - 84 % and 10 % pork fat) and M3 (MSM - 79 % and 15 % pork fat). The elaborated products were tested for technological, physical, physico-chemical, microbiological and sensory parameters. The results showed that the fish mortadella were microbiologically stable with a particular texture for an emulsified meat product, attractive colour and characteristic flavour. All formulations met the expected identity and quality requirements. They also achieved good acceptance by the judges, in which formulation M1 may be highlighted for presenting an emulsion stability of 97 %, higher protein content (18.09 %) and lower lipids (16.31 %). In addition, it also reached higher mean scores for texture attributes and purchase intent. Therefore, it is possible to prepare fish mortadellas from tilapia MSM using less animal fat.