A sustainable Short Food Supply Chain (SFSC) requires collaboration among all actors, which nowadays is facilitated by information and communication technologies (ICT). However, not all SFSC stakeholders network with others in this way, and it is not clear what will draw them to ICT interaction. A simple, user-friendly website, the SMARTCHAIN Innovation Platform, evolving since March 2019, may facilitate interaction and cooperation among SFSC stakeholders. This article presents the Platform's development and evaluates its efficacy and impact by analysing data from Google Analytics (GA) and other sources. Primary Platform features promote communication and information sharing: these are the 1) Innovation Hubs in 9 European countries, 2) Inventories including 150 SFSC innovations and 50 SFSC initiatives, 3) Resources databases of Publications and Weblinks, and 4) Training section. GA showed that visitors to the Platform increased slowly in the 16 months since its start, and the number of page views increased with the amount of time on the Platform. The most visited page of the Platform was the information-providing Innovation Inventory. Most Platform users were in partner countries of the SMARTCHAIN project, but not all Innovation Hubs had high numbers of users. Most users arrived at the Platform by direct link, but LinkedIn was the most important originating social network. Taken together, these data suggest growth potential for an easy-to-use website that provides useful and up-to-date information but little inclination for SFSC stakeholders to use an online Platform for communication.

This paper explores the challenges in meeting the regulatory requirements of short food supply chains in 9 European countries based upon findings from the European H2020 3-year project "SMARTCHAIN". The assessments of the barriers that small food producers face in meeting different regulatory requirements are presented. Drawing on the results of 10 multi-actor workshops that involved 124 participants, the most problematic policy frameworks for short food supply chains and key obstacles in different regulatory requirements are summarized. This research shows that current EU and national regulation is an obstacle to the development of short food supply chains, meaning that additional efforts are needed to tailor the regulations to small food producers involved in short supply chains. Furthermore, it is necessary to consider the introduction of more effective support measures for short food supply chains.

Short food supply chains (SFSCs) are alternative food chains that have gained ground and contribute to the global food system's sustainable transition. To explore how to enhance their capacity to act and benefit society at large, we turned to scholarly and policy work on Social Innovation (SI). We concentrated on understanding what SI in SFSCs is and how it may stimulate their potential, following a two-phase approach. In Phase 1, employing a two-step systematic literature review, we generated a rich database of SI definitions, but no suitable definition was found. We proceeded to craft a domain-specific systems-centred definition, positing that SFSCs can be seen as social living systems, while SIs in SFSCs may be seen as processes that bring about change (e.g., new mentalities) and result in the creation of sustainable value for the actors involved and beyond. With the aid of an additional scholarly review, we also determined that the drivers of SI that matter are those that secure actor engagement in the co-design and co-development stages of SI (e.g., training). In Phase 2, we attempted to empirically validate the findings from Phase 1 in 12 Community of Practice (CoP) events in nine European countries. We found partial support for the SI definition, strong support for the vital role of trust, and concluded that, in any SFSC, it is critical to have a group of dedicated actors that have realized their role as (co-)leaders in co-shaping their own future.

There has been growing consumer demand for the products and services of the short food supply chains (SFSCs) in recent times. A procedure was developed to identify the technological and technological innovations that can improve the performance and competitiveness of the SFSCs. The needs of the SFSCs for innovative solutions were collected by interviewing 18 SFSCs from 9 countries. An inventory was prepared to contain 136 technological and non-technological innovations, meeting these needs. The innovations were collected from the good practices of the 18 SFSCs, experiences of the project partners and state of the art. The success factors and bottlenecks of each short food supply chain operation and their current value propositions were identified. From the inventory, those innovations were selected for each short food chain case study which can be applied to eliminate or reduce the bottlenecks or enhance the success factors leading to new, upgraded value propositions with increased added value for the consumers. The new, upgraded value propositions can serve as a starting point for developing a strategy for improving the competitiveness of a short food chain organisation through the application of innovations.

The effect of African Yam Bean (AYB) flour substitution on the nutritional, functional and pasting properties of yellow root cassava grits was investigated. Cassava grits were obtained by peeling, washing, cutting (5.5 cm thickness in cubes), soaking (72 h, 28±2 °C), dewatering, roasting (120 °C, 20 min), sieving and milling. Roasted AYB flour was obtained by cleaning, roasting (190 °C, 10 min), dehulling, milling and sieving (425 μm). Simple lattice design was used to generate different formulations, 100:0; 90:10; 80:20; 70:30; 60:40 and 0:100 of cassava grits and AYB flour, respectively. These were analyzed for chemical composition, amino acid profile, minerals, functional and pasting properties. Total ash, protein, β-carotene and hydrogen cyanide were in the ranges of 2.16-2.66%, 2.72-20.43%, 1.33 to 3.97 µg/g and 0.07-4.47 mg/kg, respectively. Total essential amino acids and total non-essential amino acids were in the ranges of 32.51-40.18% and 59.82-67.48%. Potassium, calcium, magnesium, iron, copper, zinc, manganese and sodium of the blends ranged from 338.00-646.75, 188.00-508.00, 358.00-532.50, 59.25-140.00, 0.12-0.19, 1.07-1.71, 7.25-38.25, 25.25-161.50 mg/100 g, respectively. Bulk density, water absorption capacity, swelling capacity and swelling index ranged from 0.67-0.81 g/ml, 151.05-503.29 g/ml, 1.67-5.68 g/g and 2.86-13.32%, respectively. The blends of yellow root cassava grits and African yam bean flour could provide nutritious food formulations and offer good potential for food security.

Brazil has a great variety of fruits which are rich in bioactive compounds, such as the genipap fruit. Both the peel and the pulp of genipap have beneficial components for health, making the study of this fruit important for the proper use of its functionalities. The objective of this work was the extraction of bioactive compounds from the peel and pulp of genipap by different techniques. Extraction processes were carried out using different devices (orbital incubator shaker, ultrasonic bath, and ultrasonic probe) and at different temperatures (40, 60, 70, 80 and 90 °C). The best process for extracting phenolic compounds from the pulp of genipap fruit was with the ultrasonic probe at 40 °C, which indicated the efficiency of applying the sound waves directly to the sample. Regarding the peel, the best method for extracting phenolic compounds was using the orbital incubator shaker at 80°C.

This research aimed to study the effect of sterility values on physical quality (drained weight, brown colour index, and texture) and sensory properties of canned Agaricus bisporus mushrooms processed at different retort temperatures (115, 121, and 130 °C) and processing times (2-97 minutes). Mushrooms in brine solution media packaged in 300x407 cans were heated in industrial-scale horizontal static retorts at different retort temperatures for specific processing times to reach different F0-values. The canning process was carried out following commercial production procedures in one of the mushroom canning factories. Measurement of heat penetration into the product was carried out using a protocol established by the Institute of Thermal Process Specialists (IFTPS), and the sterility values (F0) were calculated. Our results indicated that the physical and sensory properties of canned mushrooms were not only affected by sterility value but also by the combination of temperature and time used to process the product. At the same level of sterility, a higher retort temperature (130 °C) resulted in canned mushroom with a lower browning rate, an improved texture profile (decreased hardness, increased chewiness, and shear force), a sweeter taste, and increased intensity of umami taste. However, the canning process at a temperature of 130 °C resulted in a greater reduction of the drained weight as compared to that of canning at 115 °C and 121 °C.

The research aimed to study the effect of drying processes (spray and freeze drying), and feed concentrations (80%, 65% and 50% of plant in water, w/w) on physicochemical and microbiological characteristics of star gooseberry (Sauropus androgynus), ceylon spinach (Basella alba), and cowslip creeper (Telosma minor ). After drying, the powder recovery of herbal plant powders was up to 77.47%. The aw and moisture content of spray-dried powder (SDP) were lower than that of freeze-dried powder (FDP). The drying method did not significantly affect nutritional values of both powders, whereas the feed concentrations markedly affected the nutritional values of the powders. The fibre and fat contents of powder prepared from 80% feed concentration had the highest values (p<0.05). The dried star gooseberry powder was rich in protein (13.01-16.81%) and fibre (5.03-5.52%). The colour of FDP represented a smaller change than that of SDP. The dried powders prepared by 80% showed the highest solubility, up to 85.44%. The microbial counts of SDP were lower than that of FDP. The colour might well have been preserved by freeze drying, whereas a low moisture and microbial count were likely due to the spray drying.

This study produced fish mortadella from Mechanically Separated Meat (MSM) of Nile tilapia added with animal fat. Three formulations were developed: M1 (MSM - 89 % and 5 % pork fat), M2 (MSM - 84 % and 10 % pork fat) and M3 (MSM - 79 % and 15 % pork fat). The elaborated products were tested for technological, physical, physico-chemical, microbiological and sensory parameters. The results showed that the fish mortadella were microbiologically stable with a particular texture for an emulsified meat product, attractive colour and characteristic flavour. All formulations met the expected identity and quality requirements. They also achieved good acceptance by the judges, in which formulation M1 may be highlighted for presenting an emulsion stability of 97 %, higher protein content (18.09 %) and lower lipids (16.31 %). In addition, it also reached higher mean scores for texture attributes and purchase intent. Therefore, it is possible to prepare fish mortadellas from tilapia MSM using less animal fat.

The aim of this study was to investigate the influence of raw chicken meat content on the rheological properties and 3D printability of minced meat mixtures using different concentrations of raw and cooked chicken meat. The meat mass contained yolk, crushed ice, lean raw meat and cooked meat with a high concentration of connective tissue. The concentrations of raw meat added to cooked meat as a percentage of the total weight of meat were 0; 30; 40; 50; 60; 70 and 100. To determine the rheological properties, amplitude sweep and frequency sweep were carried out with a Rheostress RS 300 (Thermo Fisher Scientific Inc.). Cubes were printed, and the printability and optical impression were evaluated using grades from 1-5. The results showed that rheological properties had a strong influence on the printability of meat mass and it is necessary for G' (storage modulus) at the LVR (linear viscoelastic region) to be higher than 7000 Pa. The complex viscosity |η*| should be higher than 170 Pa, at a shear stress τ = 10 Pa, and a frequency f = 10 Hz used to guarantee sufficient solidity.