The main objective of this research was to compare the retention of antioxidant activity and total anthocyanin content of Saskatoon berries dried by freeze drying, microwave-vacuum drying, thin layer hot air drying and vacuum drying. Antioxidant activity of berry samples was determined by DPPH radical scavenging and ABTS radical scavenging, and the pH differential method was used to determine total anthocyanin content of the berry samples. The results showed that the freeze dried Saskatoon berries exhibited the highest retention of anthocyanin and antioxidant activity among the dried samples, followed by microwave-vacuum dried berries, thin layer hot air dried berries and vacuum dried berries. There were significant differences between the berry samples at P<0.05.  DPPH radical scavenging and ABTS radical scavenging were correlated linearly with an R2 value of 0.99 at P<0.05 showing their effectiveness for the determination of the antioxidant activity of the Saskatoon berries. However, the DPPH radical scavenging assay was more effective than the ABTS radical scavenging assay. The results also showed that antioxidant activity of the berries was highly correlated with the total anthocyanin content of the fruit. The reduction of anthocyanin in dried berry samples was linearly correlated with the reduction of DPPH radical scavenging with an R2 value of 0.97 at P<0.05 and, also, linearly correlated with the reduction of ABTS radical scavenging with an R2 value of 0.88 at P<0.05.

The objective of this research was to study the effects of modified atmosphere, associated with masterpack transport packaging, and refrigerated storage time on the quality characteristics of pork loin cuts. Cuts of pork loin were packaged in trays, covered with poly(vinyl chloride) film. The trays were placed in a masterpack (MP), containing three gas compositions:  A) 75% O2 : 25% CO2, B) 50% O2 : 50% CO2 or C) 100% CO2, and stored at 2 °C. Samples were taken after 1, 8, 15, and 22 days of storage, and evaluated for numerous shelf life traits. The development of Psychrotrophic aerobic bacteria and Pseudomonas spp. was found from the 15th day of storage. There was a significant treatment effect for some of the considered parameters, such as pH (P < 0.05) and color [L* (P < 0.07), a* (P < 0.07) and b* (P < 0.01)]. There was a significant interaction (P < 0.01) for the TBARS values. It can be concluded, from the microbiological point of view, that the use of modified atmospheres containing 25% to 100% CO2 promotes the conservation of meat for up to 15 days of storage under refrigeration. From the point of view of color, atmospheres containing 75% O2 : 25% CO2 and 50% O2 : 50% CO2 ensure the color of packaged pork meat when stored at 2 °C for up to 15 days. From the point of view of lipid oxidation, packages with 100% CO2 are recommended for storage periods of more than 15 days, whereas those with 75% O2 : 25% CO2 are recommended for storage periods of up to 8 days.

Honey quality is clearly defined in the EU Directive 2001/110/EC, and by Codex Alimentarius (Codex Stan 12-1981) and the International Honey Commission (IHC, 2002). Our investigation aimed to characterize the physicochemical properties of honey produced on a small island, Gozo which is situated near Malta.  Ten randomly collected honey samples were analysed for moisture content, pH, free acidity, water insoluble content, hydroxymethylfurfural (HMF) content and total phenolic compounds.  Moisture content, pH, free acidity, water insoluble content, and HMF content were within the range specified in standards but the electrical conductivity was generally higher than 0.800 mS cm-1. This may be the result of the relatively high atmospheric and soil salinity on this small island. All the samples analysed were within the 40 mg kg-1 HMF limit, which is an indicator of honey quality. The total phenolic compounds, which represent some of the constituents derived from the nectar and pollen obtained during foraging, ranged between 236.555 and 294.209 GAE kg-1 honey. Principal Component Analysis showed the properties of polyfloral honey samples obtained from the southern part of the island to be different from those obtained from the northern part.

Underprivileged secondary school and college students tend to demonstrate limited ambitions with regards to further education and acquiring superior qualifications. In a partnership with higher education schools, such as AgroParisTech, encounters have been organised between high school students and higher education students acting as volunteering mentors.The aim is to present the high school students with the opportunity to explore new opportunities as well as to provide them with information about high profile careers and higher level training through various activities led by the higher education students, as well as through meetings, visits, weekends organised around a specific theme. Examples of such initiatives  show what benefits both the high school and higher education students can derive from them.

The safety of camel milk was assessed along the value chain in Erer, eastern Ethiopia. A total of 24 camel milk samples were aseptically collected from producers in Erer (n=12), and wholesalers and retailers (n=12) along the chain. Milk quality parameters were analyzed following standard procedures. The mean (±SD) total bacteria (TBC), Enterobacteriaceae (EC), coliform (CC), spore-forming bacteria (SFBC) and yeast and mould (YMC) counts of the milk samples analyzed were 5.2 ± 1.90, 3.2 ± 2.30, 2.9 ± 2.27, 2.1 ± 2.41 and 2.7 ± 1.61 log10 cfu mL-1, respectively. The TBC, EC, CC and SFBC of milk samples obtained from retailers in the final marketing sites were significantly higher (P < 0.05) than those obtained from producers and wholesalers in Erer. Salmonella spp. was detected in milk samples collected from all sites. Other microorganisms isolated from camel milk samples include Staphylococcus aureus (16.2%), Entrobacter spp. (14.9%), Streptococcus spp. (13.5%),Escherichia coli (8.1%), Acinetobacter spp. (7.4%), Staphylococcus epidermidis (6.8%), Klebsiella spp. (6.1%), Bacillus spp. (5.4%), Corynebacterium spp. (5.4%), Micrococcus spp. (4.7%), Lactobacillus spp. (4.1%), Listeria spp. (4.1%), Pseudomonas spp. (2%) and Shigella spp. (1.4% ). The quality of camel milk produced in the study area was generally poor and microbial contamination of camel milk occurs along the value chain while it is transported from the production site to the market. This calls for strict hygienic measures along the entire value chain in order to improve the quality and safety of camel milk produced in the area evaluated.

Macro and micro-structural changes take place during food dehydration. Macro-structural changes encompass modifications in shape, area and volume. Studies of such changes are important because dehydration kinetics (essential for calculating industrial dryers) may be highly influenced by changes in food shape and dimensions. The overall changes in volume, surface area (“shrinkage”) and shape (Heywood factor, with provides a close description of food shape) were determined experimentally, and the results were correlated with simple expressions. Hence, although dehydration kinetics can be modeled with simplified overall shrinkage expressions, the possibility of selecting a suitable geometry and predicting the characteristics dimensions will provide higher accuracy. An additional unresolved problem is the lack of a general model that predicts macro-structural changes for various foods and diverse geometries. In this work, based on experimental data of sweet and sour cherries, and rose hip fruits, a simplified general model to predict changes in volume and surface area are proposed. To estimate how the changes in characteristic dimensions affect the kinetic studies, experimental drying curves for the three fruits by means of a diffusional model considered the following variants for the characteristic dimensions: (i) The radius of the fresh food, assumed constant; (ii) The radius of the partially dehydrated product; (iii) The radius predicted by the correlation for structural changes, especially volume, obtained in this work and generalized for the three fruits, and (iv) to demonstrate the need to study the macro-structural changes for all dehydrated foods, also be present the case of a restructured food.

The food & drink (F&D) sector in Europe ranks low in innovation and the European F&D industry has been losing importance in the global market. The food professionals, i.e., food scientists and technologists (FSTs), may not be meeting the varied demands of the sector. Here, we identify education, experience and skills of current FSTs and compare  geographic regions and employment areas. Between 2009 and 2012, 287 questionnaires representing over 4000 FSTs were collected from employers in 16 countries. Analyses showed that more than 80% of FSTs have a university degree; but only in Industry in the Central European region are most degrees in food science/technology. More than half of FSTs, and almost 60% in the South, have less than 10 years’ experience. The most common FST job title is Quality Manager, but with several variations based on region and employment area. Among skills, the most common is Communicating; found in over 90% of FSTs in all regions and employment areas. Food Safety is the most common of the food sector-specific skills, present in more than 75% of FSTs, yet there are differences in food sector skills based on employment area. Overall, these data suggest similarities among currently employed food professionals throughout Europe; they are young and highly educated, but also differences, especially in their food sector-specific skills. An understanding of the current FST should contribute to the improvement of FST training and thus benefit the European food sector.

Education and training were an integral part of the MoniQA Network of Excellence. Embedded in the "Spreading of excellence programme", Work Package 9 (Joint education programmes and training tools) was responsible for establishing a joint training programme for food safety and quality within and beyond the network. So-called `MoniQA Food Scientist Training' (MoniQA FST) was offered to provide technical knowledge on different levels and research management skills as well. Training needs for different regions as well as for different target groups (scientists, industry personnel, authorities) had to be considered as well as developing strong collaboration links between network partners and related projects. Beside face-to-face workshops e-learning modules have been developed and web seminars were organized. In order to achieve high quality training, a quality assurance concept has been implemented. It turned out that these types of training are of high value in terms of bringing together scientists from different regions and cultures of the globe, involving highly qualified trainers as basis for a sustainable network in the future.

The quality of baked products is the complex, multidimensional result of a recipe, and a controlled heating process to produce the desired final properties such as taste, colour, shape, structure and density. The process of baking a sponge cake in a convective oven at different air temperatures (160-180-220 °C) leading to the same loss of mass was considered in this study. A special mould was used which allowed unidirectional heat transfer in the batter. Instrumentation was developed specifically for online measurement of weight loss, height variation and transient temperature profile and pressure in the product. This method was based on measuring heat fluxes (commercial sensors) to account for differences in product expansion and colour. In addition, measurement of height with a camera was coupled to the product mass to calculate changes in density over time. Finally, combining this information with more traditional measurements gave a better understanding of heat and mass transfer phenomena occurring during baking.

Food Studies represent the bases for multidisciplinary knowledge in food science, food engineering, food management, and how to use these scientific bases in a food worldwide context. Teaching and learning must be adapted to the new students, to the new tools, considering the cost of studies and equipment. The international availability of raw materials, the diversity of cultures, tastes and habits must be taken into account in the controlled food processes. Food engineering must be taught with reference to nutrition, health and security, but also to packaging, logistics, international rules, management of water, energy, wastes and cost. So how do we teach the present and future food engineers, to help them to acquire and build their own knowledge, to develop curiosity, an open mind and team work? How do we teach them to use, in an efficient way, computers, data bases, the internet, but also to learn and practice in the lab, on pilot equipment, in the plant during long internships? How do we give them the desire to conceive, to create, to manage, to communicate and to continue to learn during their professional life? International networks of universities, with associated people from research and industry, with teachers in elementary and secondary schools, with students, represent a main factor for reciprocal knowledge and exchanges, to preserve and use diversity to develop new ideas for teaching and learning. The objectives are to contribute to the development of our society, to feed in an harmonized way the world made of human beings, consumers, and workers in industry, research and universities.