In this study, the effect of processing methods on the nutritional quality and functional properties of cashew (Anacardium occidentale Linn) kernels were investigated. The kernels were soaked, autoclaved, roasted or germinated at varying time duration; raw kernel served as control. The samples were analysed for chemical, mineral bioavailability and functional properties. Data was subjected to analysis of variance and means were separated by the Duncan multiple range test. The result of chemical composition analyses revealed that raw cashew kernels contained 3.55±0.08% moisture, 21.3±0.05% protein, 45.0±0.15% fat, 2.53±0.02% fibre, 1.59±0.02% ash, 26.1±0.01% carbohydrate, 521.75 Kcal/g energy, 2210.09±0.02mg/kg calcium, 1712.54±0.03mg/kg magnesium, 60.04±0.01 mg/kg iron and 36.74±0.02mg/kg zinc. Tannin, phytate and oxalate concentrations in the raw cashew kernel were 10.14±0.03 mg/kg, 99.30±0.02mg/kg and 11.03±0.03mg/kg respectively. Increased fat, ash and fibre levels were noted for treated samples compared to raw kernels. Mineral concentrations were increased significantly by various treatments compared to raw kernel; however, germination resulted in the highest increase of mineral content. A reduction trend was observed in phytate, oxalate and tannin concentrations in the treated samples with respect to increased processing time. Consequently, various treatments influenced the bioavailability of mineral elements. Treated samples exhibited significant differences in loose and packed bulk densities, water and oil absorption capacities when compared to raw kernels. Germination shows potential to generate not only much needed nutrients in cashew for human development, but also improved bioavailability of nutrients and functionality compared to other processing methods. This approach can used in Community Nutrition and Emergency Feeding Programmes, in developing countries, where the consequence of anti-nutritional factors may worsen the incidence of malnutrition and disease.

Native starch was extracted from nine germplasm collections of Araucaria angustifolia seeds in aqueous medium and they were characterized by Pasting Properties (RVA), X-ray Powder Diffractometry (XRD) and Scanning Electron Microscopy (SEM). The gelatinization process of each sample was evaluated at different ratios of starch:water by Differential Scanning Calorimetry (DSC). A slight displacement in the gelatinization curves was observed for the pinhão starches prepared with different amounts of water. With an increase in water content, most of the samples presented a decrease in the peak, the conclusion temperatures, and the range of gelatinization temperatures, while the enthalpy did not follow a standard behavior. A displacement or a narrowing of the gelatinization temperature range occurred with increasing water content. Pinhão starch showed pasting temperature in the range of 60-67 o C and there were differences in the pasting properties and degree of relative crystallinity between the analyzed samples. The C-type diffraction pattern was found for all the samples and the morphology of starch granules was similar, with oval and round shapes. Therefore, different characteristics were found among starches from nine germplasm collections, encouraging the protection of the biological diversity of selected species, aiming at future applications.

The present research aimed to evaluate and compare the antioxidant activity in both pulp and peel and the physicochemical contents in the pulp of four local varieties of banana, i.e. Musa acuminata species named Sagor, Champa, Shail and Bichi, available in Sylhet region of Bangladesh. The antioxidant activity from a methanolic extract of banana peels and pulps was evaluated by determination of total phenolic content and DPPH scavenging activity. The physicochemical contents of banana pulp such as protein, fat, moisture, ash and carbohydrate were also determined. The results showed that the overall antioxidant activity of banana peel was higher than the pulp of banana. The pulp of the Shail variety had the highest antioxidant activity (TPC = 80.14 mg GAE/100 g, DPPH radical scavenging activity =91.37%) among the four varieties. Fat (1.38%) and moisture (76.23%) contents were higher in the pulp of Shail, while protein (1.82%) and carbohydrate (22.71%) contents were higher in the pulp of Bichi. The Champa variety contained higher ash content (1.05%). Among the jellies prepared from those banana varieties, the jelly of the Shail variety showed the highest score for overall acceptance (6.8) whilst the jelly prepared from the Bichi variety showed the highest score for taste (7.75). This may be due to higher carbohydrate content. The study suggests that banana peel could be used in the food industry as a raw material to produce bakery products and in cosmetics and pharmaceutical industries as an antioxidant supplement.

Grape berries are a good source of nutrients and nutraceuticals and have many benefits for human health. Growing interest in the export potential and consumption of a new grape (cv. Karaerik), cultivated as a table grape in Turkey, encouraged us to profile its major nutrient contents from six different locations. Due to its popularity, the nutritional value of this grape berry needs to be investigated to ascertain its potential economic and health benefits. The most abundant sugars in the grape berry were fructose and glucose (peel/whole fruit; averages 236.57 and 127.87, and 183.36 and 108.60 (g kg-1 fresh weight), respectively), while the major organic acids were tartaric and malic acids (7.17 and 2.81, and 2.61 and 1.76(g kg-1 fresh weight), respectively). Linoleic acid (peel/whole fruit/seed; 37.14, 33.12 and 57.83%, respectively) was the predominant fatty acid, while potassium (peel/whole fruit/seed; 9331.5, 10226.33 and 5354 mg/g dry weight, respectively) was the predominant mineral, followed by phosphorus (1592.8, 2672 and 3072.67) in the berry. Our results demonstrate that the nutrient components and physicochemical parameters varied significantly among the sampling locations. The grape berry contains considerable quantities of potentially beneficial healthy nutrients worthy of further evaluation.

The manufacture of food during distribution, a concept known as “made-in-transit” (MIT) manufacture, has the potential to expand the distribution range, extend shelf-life, and provide the customer with the freshest possible product. Benefits for the manufacturer include maximising throughput while minimising manufacturing space and inventory. This concept is new, with mushrooms being the only MIT food developed so far. The feasibility of developing an MIT product from a fermented food was reviewed using yoghurt as a model system. Through the alteration of some of the yoghurt manufacturing parameters (e.g. milk base formulation, heat treatment, starter culture composition and fermentation temperature) it is possible to develop this form of yoghurt production. A predictive microbiology approach is suitable for predicting the effects of both time and temperature on designing and predicting the fermentation process. This review demonstrates the potential of the MIT concept for a fermented food.

The objectives of this study were to optimize the conditions for cell growth and exopolysaccharides (EPS) production by using pure and mixed microbial cultures of Streptococcus thermophilus and Lactobacillus bulgaricus, and to evaluate the antioxidant and antibacterial activities of EPS in vitro. The mixed cultures of two strains showed a higher cell growth whereas the higher EPS production was detected in pure culture with S. thermophilus. The optimal medium were determined as follows (g/l): sucrose 50, yeast extract 10, KH2PO4 3 , MgSO4.7H2O 0.05 and pH initial 6.5 at 30°C. Under the optimized conditions, the values of dry cell weight (DCW) and EPS were 5.2± 0.8 g/l and 56.8 ± 0.62 mg/ml, respectively.  The EPS demonstrated a positive antioxidant potential on DDPH radical scavenging. The agar diffusion assay showed that purified EPS exhibited antibacterial activities against tested pathogens such as Escherichia coli ATCC 250922 and Staphyloccocus aureus ATCC 250923 at (62-1000) μg/mL. In conclusion, EPS have an antioxidant activity and could have applications in the food industry.

The objective of this study was to investigate the effects of gamma irradiation at doses of 0, 1, 2 and 3 kGy, and storage time of olive fruits for 0, 30 and 45 days on changes in chemical properties of olive oil during storage periods of 0, 6 and 12 months. The initial acidity value (AV), peroxide value (PV), Thiobarbituric Acid (TBA), phenolic content, iodine value (IV) and saponification value (SV) of virgin olive oil obtained from olives fruits immediately after harvest (at day zero) were 1.04%, 3.06 mEqO2 kg−1 oil, 0.025 mg MDA kg−1 oil, 314.71 mg gallic acid kg−1 oil, 93.38 gI2 100 g−1 oil and 194.88 mg KOH g−1 oil, respectively. In general, the AV and PV of olive oil was increased by gamma irradiation, while the phenolic and IV of olive oil was deceased by gamma irradiation and storage time. The TBA value and SV of olive oil was not significantly (p>0.05) changed by gamma irradiation.

Four common phthalic acid esters (PAEs) levels in tea fusions samples prepared from three types of tea bags (green, black and white) of ten commercial brands were extracted from the infusions by a dispersive liquid-liquid micro extraction method and determined by GC-MS. PAEs were not found in white tea samples. Residue levels of total phthalic acid esters (TPAEs) in black and green teas showed no significant difference (median=367.5, Interquartile range=244.7-667.5 and median=381, Interquartile range=188.7-688.2µg/kg respectively). DEHP levels in green teas were significantly higher than those in black teas (Median= 93.5 and 204 respectively). Total phthalate esters (TPAEs) levels in flavored teas were about two-fold higher than in non-flavored teas. The four commercial brands tested contain significant levels of DEHP when compared to other brands. Essential oils and essences that were added to tea for improvement of color and taste could be the main sources of PAEs contamination.

If oral absorption of phthalates were assumed to be 100%, the maximum daily exposure levels to TPAEs via tea consumption (due to consumption of 5 cups of tea prepared from the tea containing the highest levels TPAEs) were estimated to be 230e−4 µg/kg bw/Day, which are far lower than the regulation levels set by the expert panels on regularly toxicity. 

Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg−1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energy used during production process. Conservation approach I resulted in mean energy of 72.08 ± 1.73MJkg−1 where electrical energy, manual energy and thermal energy accounted for 1.75MJ (3%) 7.34MJ (10%) and 62.99MJ (87%) respectively. Conservation approach II reduced the energy further to 57.24 ± 1.73MJkg−1 as the operation was thermal energy dependent, followed by manual and electrical energy with energy values of 48.13, 7.33 and 1.78MJ equivalent to 84.10%, 12.80% and 3.10% accordingly. Conclusively, traditional method of processing utilized highest energy (445.40MJ) followed by conservation approach I (72.08MJ) and conservation approach II (57.24MJ) was least in energy demand. Conservation approach II permits energy conservation to be 87% as compared with traditional method.