Contents
01.12.2016.
Professional paper
Effect of inulin on dough and biscuit quality produced from different flours
One of the methods of improving the nutritional profile of baked-goods is the incorporation of dietary fibre (DF) to the formulation. However, DF retains more water than wheat flour, which affects dough rheological properties and thus the final product quality. Flour is the main ingredient in biscuits and contributes to the baked texture and shape of biscuits. There are large differences in quality among the flours from wheat cultivars and among non-wheat flours used for biscuit production. In previous works, different dietary fibres were tested and inulin was found to have a positive quality effect on biscuits made from an all-purpose wheat flour without the need of introducing significant changes in dough properties. To know whether these results are extended to different types of flours that can be used for biscuit production, this paper aimed to analyse the effects of different levels of inulin incorporation on dough and biscuits quality made from three different wheat flours and one triticale flour. Chemical and physic-chemical characterization of the flour samples was performed and compared (moisture, ashes, gluten, solvent retention capacity (SRC) and protein content). Inulin was incorporated to biscuits formulation in two levels: 6 and 12% (wheat replacement). Dough and biscuits quality was measured by spread rate during baking and biscuit factor, texture and surface colour. Inulin incorporation increased dough spreading and biscuit factor and decreased biscuit hardness. The enhancing effect of inulin was observed in all flour. The results confirmed the effect of inulin on biscuits obtained with all flour assayed, despite the differences in flour quality that was tested.
Maria S. Blanco Canalis, Alberto E. León, Pablo D. Ribotta
18.10.2016.
Original scientific paper
Assessment of nutritional composition in elephant foot yam (Amorphophallus paeoniifolius Dennst- Nicolson) cultivars
Elephant foot yams make a significant contribution to diets in tribal people of India. However, there is insufficient study of their nutritional and antioxidant value. In this paper the various traits of eleven cultivars of elephant foot yam: BCA-1, BCA-2, BCA-4, BCA-5, BCA-6, NDA-4, NDA-5, NDA-9, IGAM-1, AC-28 and Gajendra were studied and observed during the growth and development stage. The cultivar of BCA-6 contained the maximum amount of starch and total phenol at 100 Days After Planting (DAP) while cv., NDA-9 and NDA-5 showed the maximum content of starch and total phenol at 250 DAP respectively. However, the cultivar BCA-1 stored the maximum amount of carbohydrate at 100 DAP whereas ascorbic acid and β-carotene content was highest at 250 DAP. The protein amount was maximum in cv., BCA-2 and AC-28 at 100 and 250 DAP respectively. This information will provide breeders with the ability to develop desirable types of elephant foot yams having high yields and better nutritional profiles.
Amit Singh, Arvind Chaurasiya, Surajit Mitra
18.04.2016.
Original scientific paper
Pronase hydrolysis as a pretreatment for quantifying Maillard intermediates during toasting of cornflakes
Some of the products generated by the Maillard reaction are desired and very important for defining consumer acceptance of breakfast cereals. However, in recent years there has been an increased concern about compounds that are potentially harmful such as furfurals. The aim of this work was to analyze the effectiveness of protein hydrolysis with pronase as a pretreament for the evaluation of furfurals generated by the Maillard reaction during toasting of cornflakes and the parallel development of brown and fluorescent compounds. Furfurals were more accurately quantified with the pronase hydrolysis pretreatment because the protein matrix binds furfurals and fluorescent compounds. For control of the early reaction steps in the toasting process, the most sensitive parameter was fluorescence.
Mario Cueto, Abel E. Farroni, M. del Pilar Buera
18.04.2016.
Original scientific paper
Following the trail of crumbs: A bibliometric study on consumer behavior in the Food Science and Technology field
The main goal of this paper was to conduct an exploratory study regarding consumer preference in the field of Food Science and Technology. Two questions guided this study: Is it possible to identify a trail of crumbs concerning consumer behavior in the Food Science and Technology field? And, if that trail exists, where is it leading academia in terms of research trends of interest? A bibliometric study was conducted using an analysis software called CiteSpace. The use of this methodology ensured the impartiality of the literature review of the topic of interest. A survey of all articles indexed in Web of Science between 1993 and 2013 regarding consumer behaviour was carried out. In total, 1,786 articles were analyzed. The recent increased concern regarding consumer behavior was evident. With the USA and Spain having a significant role in driving the trail. Eight other countries that exhibited similar influences are: Italy, England, Australia, Germany, Denmark, France, Netherlands and Brazil. The research trends observed were grouped into seven major hot topics: sensory, health, safety, willingness to pay, packaging, ethics, and lifestyle/convenience. However, the development of publishing trends depended on where the research was carried out. A final suggestive finding, demonstrated that scientific knowledge does not occur in a vacuum.
Marcia-Gabriela C. Kasemodel, Fausto Makishi, Roberta C. Souza, Vivian-Lara Silva
18.10.2016.
Original scientific paper
Modeling the kinetics of peroxidase inactivation, colour and texture changes of Portuguese cabbage (Brassica oleracea L. var. costata DC) during UV-C light and heat blanching
The effects of heat blanching and UV-C light followed by heat on Portuguese cabbage peroxidase (POD), colour and texture were studied in the temperature range of 80-95 °C. POD inactivation, lightness (L) and yellowness (b) colour changes were described by a first-order reaction model. The greenness (a) colour and texture (firmness) changes followed a two fraction kinetic model behaviour. The temperature effect was well described by the Arrhenius law. At lower temperatures the combined treatment showed higher POD inactivation. Colour and texture parameters did not show significant differences between treatments. Long processing times turned the leaves slightly darker, decreased greenness, yellowness and firmness. Short processing times increased the firmness and greenness of the leaves. The treatment at 80 °C for 90 seconds reduced 90% of POD, retaining 98% of lightness and 92% of yellowness and improved the green colour (130%) and firmness (125%). At 80 °C the heat blanching required 7.4 min to inactivate 90% of the enzyme activity, reducing lightness, greenness, yellowness and firmness to 92%, 68%, 62% and 61%, respectively. The present findings will help to optimize the Portuguese cabbage blanching conditions.
Rui M. S. Cruz, Ana I. A. Godinho, Dilek Aslan, Necip F. Kocak, Margarida Vieira
01.12.2015.
Professional paper
Towards the development of a common starter culture for fufu and usi (edible starch): Screening for potential starters
Fermented cassava products like fufu and usi are important staple foods in many African homes. Natural fermentation time is usually long resulting in slower acidification and inconsistent nutritional composition of products which could be overcome with the use of starter culture. However, most available starters are used for single food fermentation and are uneconomical. This necessitates the development of a starter culture for multiple related food products to reduce cost. Hence, this study aimed at screening for potential starters in the development of a common starter culture for fufu and usi.Fresh, peeled, chipped and grated cassava tubers were spontaneously fermented and lactic acid bacteria were isolated from the fermenting mash at 24 hour intervals. Ninety eight (98) isolates were randomly picked. Lactobacillus plantarum had highest occurrence (50.0%) in both fermentations.All selected isolates did not hydrolyze starch, but produced linamarase and pectinase. Fermenting pH ranged between 6.50 and 3.58 during 72 hours fermentation. Lactic acid concentration ranged from 1.10 g/L to 1.78 g/L at 24 hours, 1.22 g/L to 2.45 g/L at 48 hours and 0.57 g/L to 2.55 g/l at 72 hours. The highest hydrogen peroxide concentration produced was 629 µg/L at 24 hours while the least was 136 µg/L at 72 hours. 1.08 g/L of diacetyl was the least concentration produced at 24 hours while the highest was 2.86 g/L at 48 hours.Five potential starters were identified as Lactobacillus pentosus F2A, L. plantarum subsp. argentolarensis F2B, L. plantarum F2C, L. plantarum U2A and L. paraplantarum U2C.
Kubrat A. Oyinlola, Anthony A. Onilude, Oluwaseun E. Garuba
01.12.2015.
Professional paper
The emulsifying effect of biosurfactants produced by food spoilage organisms in Nigeria
Food spoilage organisms were isolated using standard procedures on Nutrient Agar, Cetrimide Agar and Pseudomonas Agar Base (supplemented with CFC). The samples were categorized as animal products (raw fish, egg, raw chicken, corned beef, pasteurized milk) and plant products (vegetable salad, water leaf (Talinium triangulare), boiled rice, tomatoes and pumpkin leaf (Teifairia occidentalis).They were characterised as Pseudomonas putida, Pseudomonas aeruginosa, Pseudomonas stutzeri, Burkholderia pseudomallei, Serratia rubidaea, Corynebacterium pilosum, Bacillus subtilis, Bacillus mycoides, Bacillus laterosporus, Bacillus laterosporus, Serratia marcescens, Bacillus cereus, Bacillus macerans, Alcaligenes faecalis and Alcaligenes eutrophus. Preliminary screening for biosurfactant production was done using red blood haemolysis test and confirmed by slide test, drop collapse and oil spreading assay. The biosurfactant produced was purified using acetone and the composition determined initially using Molisch’s test, thin layer chromatography and gas chromatography mass spectrometry. The components were found to be ethanol, amino acids, butoxyacetic acid, hexadecanoic acid, oleic acid, lauryl peroxide, octadecanoic acid and phthalic acid. The producing organisms grew readily on several hydrocarbons such as crude oil, diesel oil and aviation fuel when used as sole carbon sources. The purified biosurfactants produced were able to cause emulsification of kerosene (19.71-27.14%) as well as vegetable oil (16.91-28.12%) based on the emulsification index. This result suggests that the isolates can be an asset and further work can exploit their optimal potential in industries.
Christianah O. Ogunmola, Olusimbo O. Aboaba
01.12.2015.
Professional paper
A food recall case study in Australia – Towards the development of food safety applications for consumers
Changes in consumer attitudes, behaviours and purchasing preferences towards different types of food highlight the increased demand for better quality information on safety, quality and provenance of food products and on sustainability of food production processes. These changes offer both new opportunities and risks for food producers who require mechanisms to better understand and respond to changing consumers’ decision-making trends on food. In the area of food safety, investigation of consumer and producer responses during recall incidents provide an opportunity to holistically understand existing information flows and elicit user requirements necessary for the development of more effective consumer food safety applications.This paper reports on a case study conducted with an Australian premium manufacturing company that experienced a food recall in 2014. The investigation confirms that current Australian food recall response mechanisms do not guarantee a closed loop of communication with all purchasers of a recalled product. It also highlights that producers still face difficulties in understanding how best to effectively understand and respond to different types of consumers. It emerges that recovery from a food incident relies on many factors including pre-existing brand reputation, effective information management, control mechanisms and supply chain partner response. From a consumer perspective, it is evident that consumers’ responses are influenced by various factors that require sensitivity around the choice of information modality and information platform adopted to enhance communications during food recall. The paper highlights the need for further research into understanding consumer food safety behaviours post-purchase to improve the development of consumer food safety applications.
Adeola Bamgboje-Ayodele, Leonie Ellis, Paul Turner
01.12.2015.
Professional paper
Assessment of nutritional composition in elephant foot yam (Amorphophallus paeoniifolius Dennst- Nicolson) cultivars
Elephant foot yams make a significant contribution to diets in tribal people of India. However, there is insufficient study of their nutritional and antioxidant value. In this paper the various traits of eleven cultivars of elephant foot yam: BCA-1, BCA-2, BCA-4, BCA-5, BCA-6, NDA-4, NDA-5, NDA-9, IGAM-1, AC-28 and Gajendra were studied and observed during the growth and development stage. The cultivar of BCA-6 contained the maximum amount of starch and total phenol at 100 Days After Planting (DAP) while cv., NDA-9 and NDA-5 showed the maximum content of starch and total phenol at 250 DAP respectively. However, the cultivar BCA-1 stored the maximum amount of carbohydrate at 100 DAP whereas ascorbic acid and β-carotene content was highest at 250 DAP. The protein amount was maximum in cv., BCA-2 and AC-28 at 100 and 250 DAP respectively. This information will provide breeders with the ability to develop desirable types of elephant foot yams having high yields and better nutritional profiles.
Amit Singh, Arvind Chaurasiya, Surajit Mitra
01.12.2015.
Professional paper
Solubility of Stevioside and Rebaudioside A in water, ethanol and their binary mixtures
In order to investigate the solubility of Stevioside and Rebaudioside A in different solvents (ethanol, water, ethanol:water 30:70 and ethanol:water 70:30), supersaturated solutions of pre-crystalized steviol glycosides were maintained at different temperatures (from 5 °C to 50 °C) to reach equilibrium. Under these conditions significant differences were found in the extent of solubility. Rebaudioside A was poorly soluble in ethanol and water, and Stevioside was poorly soluble in water. Solvent mixtures more effectively promoted solubilisation, and a significant effect of temperature on solubility was observed. The two steviol glycosides showed higher solubilities and this behavior was promoted by the presence of the other sweetener. The polarity indices of the solvents were determined, and helped to explain the observed behavior. Several solute-solvent and solute-solute interactions can occur, along with the incidence of a strong affinity between solvents. The obtained results are in accordance with technological applications of ethanol, water and their binary mixtures for Stevioside and Rebaudioside A separations.
Liliana S. Celaya, Eugenio Kolb, Nicolás Kolb
