What is the profile of Food Engineering education in Brazil? Are we following the contemporary professional renewal trend? Driven by these questions, the present study analyzed data regarding 21 academic courses, which represent approximately 22% of the total bachelor’s degree in food engineering courses offered in the country. Samples were defined considering a Brazilian annual ranking of undergraduate programs: very good (four stars) and excellent (five stars). Next, information was recovered from both the Brazilian Ministry of Education and institutional homepages of each analyzed program. The results suggest that food engineering programs exhibit relative identity, naturally due to their history and the path of each program and their faculty, shaping particularities in how fields of knowledge are constituted, in addition to their representativeness in the total workload of the program. However, initial analysis is suggestive regarding understanding that Brazil is not properly doing its homework, based on global movement, concerning food engineering education. The need to rethink Brazilian technical education, without culminating in additional workload, is emphasized, not only regarding new materials and technologies for learning and teaching, but also in terms of bringing a human and market approach. The achievement of this complex goal seems to be provided by the encouragement of student associations, transversal learning processes, and learning experiences outside the classroom as a means of improving undergraduate programs and human resources.

The objectives were to evaluate the properties of refined (ROO) and extra-virgin olive oil (EVOO) in their natural state (fresh) and after heating, while comparing them with each other and with refined soybean (SBO) and refined sunflower seed oil (SFO). The methodology was designed to simulate, in controlled laboratory conditions, the home-frying process, while evaluating fatty acid profile (fatty acid methyl esters were separated by gas chromatography), concentration of phenolic compounds (Gallic acid dosage), antioxidant activity (DPPH), and production of polar compounds (thin layer chromatography) before and after heating to 200 °C for six minutes. It was observed that, before and after heating, SBO and SFO are rich in polyunsaturated fatty acids (FA) and ROO and EVOO are rich in monounsaturated FA. Fresh or heated, ROO and EVOO do not have trans FA, which are present in SBO and SFO, and increase in SBO after heating (+ 32.8%). The concentrations of phenolic compounds are always higher in olive oils, despite the decrease that occurs after heating (-7.5% in the ROO and -24.6% in EVOO). Antioxidant activity is greater when olive oils are fresh and remains present in EVOO after heating. The concentration of polar compounds was similar for all oils after heating. In conclusion, ROO and EVOO are the richest in monounsaturated FA even after heating, with no production of saturated or trans FA. Despite losing some antioxidant activity, heated EVOO remains richer in monounsaturated FA than ROO, SBO and SFO in the fresh version. All oils suffer similar rates of degradation.

The present research aimed to evaluate and compare the antioxidant activity in both pulp and peel and the physicochemical contents in the pulp of four local varieties of banana, i.e. Musa acuminata species named Sagor, Champa, Shail and Bichi, available in Sylhet region of Bangladesh. The antioxidant activity from a methanolic extract of banana peels and pulps was evaluated by determination of total phenolic content and DPPH scavenging activity. The physicochemical contents of banana pulp such as protein, fat, moisture, ash and carbohydrate were also determined. The results showed that the overall antioxidant activity of banana peel was higher than the pulp of banana. The pulp of the Shail variety had the highest antioxidant activity (TPC = 80.14 mg GAE/100 g, DPPH radical scavenging activity =91.37%) among the four varieties. Fat (1.38%) and moisture (76.23%) contents were higher in the pulp of Shail, while protein (1.82%) and carbohydrate (22.71%) contents were higher in the pulp of Bichi. The Champa variety contained higher ash content (1.05%). Among the jellies prepared from those banana varieties, the jelly of the Shail variety showed the highest score for overall acceptance (6.8) whilst the jelly prepared from the Bichi variety showed the highest score for taste (7.75). This may be due to higher carbohydrate content. The study suggests that banana peel could be used in the food industry as a raw material to produce bakery products and in cosmetics and pharmaceutical industries as an antioxidant supplement.

The objective of this study was to investigate the effects of gamma irradiation at doses of 0, 1, 2 and 3 kGy, and storage time of olive fruits for 0, 30 and 45 days on changes in chemical properties of olive oil during storage periods of 0, 6 and 12 months. The initial acidity value (AV), peroxide value (PV), Thiobarbituric Acid (TBA), phenolic content, iodine value (IV) and saponification value (SV) of virgin olive oil obtained from olives fruits immediately after harvest (at day zero) were 1.04%, 3.06 mEqO2 kg−1 oil, 0.025 mg MDA kg−1 oil, 314.71 mg gallic acid kg−1 oil, 93.38 gI2 100 g−1 oil and 194.88 mg KOH g−1 oil, respectively. In general, the AV and PV of olive oil was increased by gamma irradiation, while the phenolic and IV of olive oil was deceased by gamma irradiation and storage time. The TBA value and SV of olive oil was not significantly (p>0.05) changed by gamma irradiation.

Alcoholic and aqueous extracts were obtained from red sweet pepper (Capsicum annuum L.) by different methodologies to evaluate their cytotoxic, antioxidant and antimicrobial properties. Alcoholic extracts (MFP, MSd, SFP, SDP, SSd) from fresh red sweet pepper (FP) and dry pulp (DP) and seed (Sd) were obtained by maceration (M) and Soxhlet (S) equipment using methanol as extraction solvent; whereas aqueous extracts (LFP, LSd) were obtained by decoction followed by lyophilization (L). Human tumoral cell lines from breast (MCF-7 and SKBr3), prostate (PC3) and cervix (HeLa), and fibroblasts (as control) were used to determine the cytotoxic properties by the MTT assay. Antioxidant and antimicrobial properties were determined by DPPH and disc diffusion method, respectively. The extracts SDP and SFP showed the higher cytotoxic activity. The SDP extract had a significant (P < 0.05) in-vitro effect on HeLa (1.9 ± 1.4 µg/mL) and PC3 (< 1 µg/mL) cells with a moderated impact on fibroblasts (26.1 ± 1.2 µg/mL); whereas, SFP had a significant (p < 0.05) effect on MCF-7 cell line (2.1 ± 1.2 µg/mL) with a moderated impact on fibroblasts (25.9 ± 1.0 µg/mL). The higher antioxidant activity was found for MFP (80.3 ± 0.2%) and SFP extracts (75.5 ± 0.5%). Mild antimicrobial activity was only observed for alcoholic extracts. The results showed the potential of red sweet pepper (C. annuum L.) as a source of antioxidant and cytotoxic compounds, and suggest the need of further studies to isolate and characterize the bioactive compounds that impart those properties. 

Many minimally processed foods depend on a combination of inhibitory factors to reduce the hazard of foodborne illness. Therefore, inactivation of Listeria innocua was studied according to a 24 factorial experiment designed to draw conclusions about temperature (52.5 °C and 65.0 °C), pH (4.5 and 7.5), water activity (aw=0.95 and 0.99) and solute type (NaCl and glycerol) effects. Three different recovery media were used to assess injured cells. Survival data were fitted with a Gompertz-based model and kinetic parameters (shoulder, maximum inactivation rate – kmax, and tail) were estimated. Results showed that shoulder was affected by temperature, pH and combined effects; kmax was influenced by all factors and their combinations; and tail was affected by aw, temperature and aw/pH combination. Results demonstrated the potential occurrence of microbial cross-protection survival techniques between the various stresses, e.g. heat and osmolarity. Indeed, this work clearly established that, to avoid hazards, Listeria inactivation must be evaluated with a maximum of environmental factors that undergo alterations. Only thus, appropriate food preservation treatments can be developed and consequently, the safety of food products can be assured.

The molecular structure of Traditional Balsamic Vinegar (TBV) undergoes shear-induced and timedependent jamming transitions due to the high solute concentration and self-assembling phenomena of high molecular size melanoidins with very-long relaxation times (12 years at least or more than 25). The purpose of this work was to perform a descriptive and quantitative evaluation of relationships between rheological properties, vinegar composition, and perceptual assessment of sensory properties according to the official sensory procedure. With this aim, vinegars having quality traits matching legal requirements for the PDO designation were analyzed for their reducing sugars (glucose and fructose), volatile acidity, fixed acidity, pH, Brix degree, and density as well as for their flow behaviour and dynamic viscosity over a wide range of shear rates. Results showed that flow behaviour of TBV was affected by jamming properties over wide-scale ranges of shear rate producing flow instability below a shear rate of 60 s−1 . Homogeneous, continuous flow was found at medium-high shear rates with thickening and/or thinning traits. A common onset for the structure scaling was mathematically estimated to occur close to when the density was 1.32 gmL−1 . Comparative analysis of rheological, compositional and sensory properties suggested that the colloidal jamming of the vinegar melanoidins dominated the total olfactive and gustative stimuli, and determined the classification of the vinegars that had a higher dynamic viscosity but more homogeneous flow as being of the highest commercial quality category. A robust statistical model was proposed encoding for the top-down decision-making process for quality assignment according to the official sensory procedure, using composition and flow properties as predictor variables.

The aim of the study was to dry zucchini (Cucurbita pepo) by two different methods (convective hot-air (CHD) and microwave-assisted drying (MWD)). The effect of air temperature (60, 70 and 80°C), microwave (MW) power (180, 360, 540 W) and sample thickness (5 and 10 mm) on some drying characteristics of zucchini were investigated. Thirteen mathematical models available in the literature were fitted to the experimental moisture ratio data. The coefficients of the models were determined by non-linear regression analysis. It was determined that the model that fits the moisture ratio data the best varies at different drying conditions. Increasing drying temperature and MW power and reducing sample thickness improved the drying rate and drying time. Drying in microwave has reduced the drying time by 52-64% for zucchini. It was found that the effective moisture diffusivities increased with increasing temperature and MW power. MWD samples had better rehydration ratios compared to ones dried only in tray drier for 5 mm thickness.

Launea taraxacifolia and Crassocephalum rubens are among many wild, underutilized and under cultivated vegetables in Nigeria that are at risk of extinction. Total flavonoid contents (TFC), total phenolic contents (TPC), and antioxidant activities of different concentrations (1-5 mg ml−1 ) were evaluated; using in vitro assays to assess the scavenging properties of 2, 2-diphenyl-1-picryl hydrazyl (DPPHRSP), nitric oxide (NORSP) and hydroxyl (OHRSP). Phenolic profiles of the alcoholic extracts were characterized using high-performance liquid chromatography techniques. The results revealed higher TFC (mg/100g RE) in aqueous (6.06±0.02-78.79±0.01) than alcohol extracts (with methanol 0.93±0.01—12.73±0.04, and with ethanol -0.85±0.01–7.70±0.03). In a similar trend, OHRSP (%) was higher in aqueous extracts (40.83±0.10–91.74±0.19) than alcoholic extracts (with methanol - 11.67±0.3–30.83±0.06; and with ethanol -14.42±0.06-40.27±0.05). TPC (mg/100g GAE) which was higher in alcoholic extracts (with methanol -21.48±0.01–133.20±0.16 and with ethanol -9.45±0.01– 59.73±0.02) than aqueous extracts (14.83±0.01–52.64±0.03) was in agreement with the trend observed for NORSP (28.24±0.05-151.76±0.08 for methanolic extracts, 21.99±0.13–49.93±0.04 for ethanolic extracts and 38.47±0.11–86.15±0.05 for aqueous extracts). DPPHRSP was also higher in alcoholic extracts (methanolic -22.81±0.01-48.41±0.05 and ethanolic–14.53±0.01-62.68±0.07) than aqueous extracts (13.66±0.13–42.86±0.03). TFC, TPC and antioxidant activities showed concentration dependent increase and strong positive correlation with TFC (r= 0.926 – 0.997and r= 0.432 – 1.000) and TPC (r= 0.825 – 0.999 and r= 0.473 - 0.994) for L. taraxacifolia and C. rubens respectively. Caffeic acid, chlorogenic acid, ellagic acid, quercetin and kaempferol were identified as major phenolic components in the extracts. The vegetables have high antioxidant potential for promoting good health; which could be attributed to the identified phytochemicals in them.

One of the methods of improving the nutritional profile of baked-goods is the incorporation of dietary fibre (DF) to the formulation. However, DF retains more water than wheat flour which, affects dough rheological properties and thus the final product quality. Flour is the main ingredient in biscuits and contributes to the baked texture and shape of biscuits. There are large differences in quality among the flours from wheat cultivars and among non-wheat flours used for biscuit production. In previous works, different dietary fibres were tested and inulin was found to have a positive quality effect on biscuits made from an all-purpose wheat flour without the need of introducing significant changes in dough properties. To know whether these results are extended to different types of flours that can be used for biscuit production, this paper aimed to analyse the effects of different levels of inulin incorporation on dough and biscuits quality made from three different wheat flours and one triticale flour. Chemical and physic-chemical characterization of the flour samples was performed and compared (moisture, ashes, gluten, solvent retention capacity (SRC) and protein content). Inulin was incorporated to biscuits formulation in two levels: 6 and 12% (wheat replacement). Dough and biscuits quality was measured by spread rate during baking and biscuit factor, texture and surface colour. Inulin incorporation increased dough spreading and biscuit factor and decreased biscuit hardness. The enhancing effect of inulin was observed in all flour. The results confirmed the effect of inulin on biscuits obtained with all flour assayed, despite the differences in flour quality that was tested.