Current issue

Issue image

Volume 13, Issue 2, 2024

Online ISSN: 2182-1054

Volume 13 , Issue 2, (2024)

Published: 18.10.2024.

Open Access

All issues

More Filters

Contents

18.10.2018.

Original scientific paper

Food safety implementation in the perspective of network learning

The food sector frequently faces difficulties in implementing food safety standards. Indeed, there are many barriers to appropriation of quality management standards which make effective implementation difficult for small and medium enterprises (SMEs), such as limited access to information, lack of financing and cognitive resources, food hazard perception, and insufficient access to adequately trained personnel. Consequently, one fundamental objective for practitioners such as managers, public bodies and development agencies is to help these food SMEs in improving their implementation capacity, which is usually done through the launch of different forms of collective initiatives such as associations, clubs, learning platforms, regional actions and other forms of collaboration. Globally speaking, the objective of these initiatives typically is to develop a step by step approach providing guidance on good practices associated with the implementation of these systems. The objective of the article is to explore and test the validity of this hypothesis, rooted in a general idea of “organizational network learning”: the capacity of SMEs to adopt new food safety schemes is seen as a whole and necessitates mobilizing, at the same time, 1) formal innovation networks, which bring cognitive resources and institutional credibility, and 2) the practice by managers of informal network activities through interactive exchanges of information, benchmarking, knowledge transfer and translation, and experiential learning.

Zam-Zam Abdirahman, Leslie D. Bourquin, LOIC SAUVEE, Deepa Thiagarajan

18.04.2018.

Original scientific paper

Optimization of osmotic dehydration of chestnut (Castanea sativa Mill.) slices using Response Surface Methodology

Osmotic dehydration of chestnut slices in sucrose was optimized for the first time by Response Surface Methodology (RSM). Experiments were planned according to a three-factor central composite design (α=1.68), studying the influence of sucrose concentration, temperature and time, on the following parameters: volume ratio, water activity, color variation, weight reduction, solids gain, water loss and normalized moisture content, as well as total moisture, ash and fat contents. The experimental data was adequately fitted into second-order polynomial models with coefficients of determination (R2 ) from 0.716 to 0.976, adjusted-R2 values from 0.460 to 0.954, and non-significant lacks of fit. The optimal osmotic dehydration process conditions for maximum water loss and minimum solids gain and color variation were determined by the “Response Optimizer” option: 83% sucrose concentration, 20 °C and 9.2 hours. Thus, the best operational conditions corresponded to high sugar concentration and low temperature, improving energy saving and decreasing the process costs.

Teresa Delgado, Bruna Paim, Jose Alberto Pereira, Susana Casal, Elsa Ramalhosa

18.10.2018.

Original scientific paper

Antioxidant activities of aqueous extracts from nine different rose cultivars

Rose petals have been applied as food additives in teas, cakes and flavor extracts. The aim of this research study was to explore and reveal the antioxidant potential of aqueous extracts of rose petals belonging to nine genotypes of rose (wild as well as hybrid). The in vitro antioxidant activities of roses were studied by lipid peroxidation assay, DPPH radical scavenging assay, iron chelation assay, phosphomolybdenum reduction assay and total phenolic and flavonoid contents. The aqueous extract showed inhibition against lipid peroxidation (TBARS), induced by prooxidants (10 µM FeSO4) in mice liver homogenate. The free radical scavenging activities of the extracts were determined by scavenging of the DPPH radical. Extracts also showed metal chelating activities and high antioxidant activity in the phosphomolybdenum assay. The high content of phenolics and flavonoids detected in aqueous extracts may be responsible for the antioxidant activity. Amongst the different rose genotypes, screened, Rosa moschata (musk rose) was found to carry slightly higher antioxidant potential, owing to its higher phytochemical content.

Hamadia Khurshid, Syed Mubashar, Shahid Iqbal Awan, Syed Rizwan Abbas, Muhammad Irshad

01.12.2017.

Professional paper

Energy pattern and conservations of condiment produced from soybean (Glycine max)

Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg-1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energy used during production process. Conservation approach I resulted in mean energy of 72.08 ± 1.73MJkg-1 where electrical energy, manual energy and thermal energy accounted for 1.75MJ (3%) 7.34MJ (10%) and 62.99MJ (87%) respectively.  Conservation approach II reduced the energy further to 57.24 ± 1.73MJkg-1  as the operation was thermal energy dependent, followed by manual and electrical energy with energy values of 48.13, 7.33 and 1.78MJ equivalent to 84.10%, 12.80% and  3.10% accordingly. Conclusively, traditional method of processing utilized highest energy (445.40MJ) followed by conservation approach I (72.08MJ) and conservation approach II (57.24MJ) was least in energy demand. Conservation approach II permits energy conservation to be 87% as compared with traditional method.

Ismaila B. Anjorin, Rahman Akinoso, Mayowa S. Sanusi

18.10.2017.

Original scientific paper

Impact of selected polyphenolics on the structural properties of model lipid membranes – a review

This review is a presentation of data gathered on the interactions of several polyphenolics (i.e., phenolic acids, stilbenes, flavonoids) with lipid bilayers of different lipid compositions. These polyphenolics have been investigated through a combination of fluorescence spectroscopy, electron paramagnetic resonance spectroscopy, and differential scanning calorimetry, to detect changes in membrane fluidity. Among the investigated phenolic acids, the least polar phenolic acid, p-coumaric acid, has the greatest effect on lipid membrane structure. It appears to have a greater ability to cross membranes by passive transport than more polar phenolic acids. On the other hand, among the flavonoids that have been studied, the anthocyanins cyanidin-3-glucoside and its aglycone are inactive. All of the flavonols tested, except for epigallocatechin-3-gallate, promote small decreases in membrane fluidity. Computer simulation of electron paramagnetic resonance spectra for flavonoids indicated two or three regions in the phosphatidylcholine/ phosphatidylserine (2.4:1) membrane with different fluidity characteristics. The effects of the different flavonoids are correlated to their structural characteristics, whereby even the difference in one -OH group can be important, as can the number of H-bonds they form. The role of membrane composition and flavonoid structure in these interactions with lipid membranes are of great importance for bioavailability of these compounds and for their biological effects in an organism.

Natasa Poklar Ulrih, Ajda Ota, Veronika Abram

18.10.2017.

Original scientific paper

Food science and technology students self-evaluate soft and technical skills

Food Scientists and Technologists (FS&T) need diverse skills in the globalized food and drink sector: Food-specific or scientific / technical skills and generic or intuitive soft skills. This study determined how satisfied FS&T students were with overall improvement, and in key technical and soft skills, based on their university work; and if satisfaction was linked to geography, degree in progress, anticipated degree, anticipated work place or anticipated job responsibility. An on-line survey was completed by 267 students in over 20 countries using a 5-point Likert scale to evaluate satisfaction. Responses were analyzed by the Friedman or Kruskal Wallis tests for more than two groups, otherwise by the Wilcoxon Signed Rank or Mann-Whitney tests. There were no differences in Overall Satisfaction with technical and soft skills training. Among soft skills, training in Working with Others and Being Responsible were more often rated “Excellent” and students were more satisfied with their training than with Solving Problems, Communication and Positive Attitude. Students anticipating a job with high responsibility were more satisfied with overall soft skill training and with 3 of the 5 specific soft skills. Among technical skills, students were more satisfied with improvement in basic sciences (Microbiology, Chemistry, Processing, Safety), and those in Northern Europe were more satisfied with overall technical training. These data show variations in perception and/or efficacy of technical and soft skill training in Food Science programmes and underline the need for separate attention to the incorporation of soft skill training into the design of FS&T courses.

Katherine M. Flynn, Peter Ho, Margarida C. Vieira, Paola Pittia, Marco Dalla Rosa

18.10.2017.

Original scientific paper

Effect of tuna skin gelatin-based coating enriched with seaweed extracts on the quality of tuna fillets during storage at 4 °C

Nowadays, consumers demand high quality food products with an extended shelf-life without chemical additives. Edible coatings (EC) containing natural compounds are a promising preservation technology for raw seafood without compromising fresh-like appeal and nutritional content. The aim of this work was to evaluate the effect of Thunnus obesus skin gelatin-based EC containing Codium spp. or Fucus vesiculosus extracts on raw tuna preservation. Three gelatin-based EC (gelatin (5 %) + glycerol (25 %); gelatin (5 %) + Codium spp. (1 %) + glycerol (25 %); gelatin (5 %) + Fucus vesiculosus (1 %) + glycerol (25 %)) were applied directly on the surface of tuna fillets. Functional properties of gelatin and gelatin-based EC containing seaweed extracts were also studied. The gelatin was extracted by an acid-swelling process in the presence/absence of pepsin, followed by subsequent heating/refrigeration, after a pre-treatment with NaOH. The type of acid, temperature and concentration of NaOH greatly influence the process yield. The higher extraction yield was achieved using acetic acid in the presence of pepsin by subsequent refrigeration, especially when skins were previously treated with NaOH (0.2 M). Tuna quality was assessed over 12 days of storage at 4 ± 1 °C in terms of chemical and microbial indices. Results showed that tuna skin gelatin-based EC avoids tuna deterioration. Microbial growth, assessed by total viable counts, and total volatile basic nitrogen were maintained below the maximum limits recommended, contrarily to the control. Additionally, the use of EC increased the stability of red colour during storage.

Milene Vala, Ana Augusto, Andre Horta, Susana Mendes, Maria M. Gil

01.12.2016.

Professional paper

Effect of inulin on dough and biscuit quality produced from different flours

One of the methods of improving the nutritional profile of baked-goods is the incorporation of dietary fibre (DF) to the formulation. However, DF retains more water than wheat flour, which affects dough rheological properties and thus the final product quality. Flour is the main ingredient in biscuits and contributes to the baked texture and shape of biscuits. There are large differences in quality among the flours from wheat cultivars and among non-wheat flours used for biscuit production. In previous works, different dietary fibres were tested and inulin was found to have a positive quality  effect on biscuits made from an all-purpose wheat flour without the need of introducing significant changes in dough properties. To know whether these results are extended to different types of flours that can be used for biscuit production, this paper aimed to analyse the effects of different levels of inulin incorporation on dough and biscuits quality made from three different wheat flours and one triticale flour. Chemical and physic-chemical characterization of the flour samples was performed and compared (moisture, ashes, gluten, solvent retention capacity (SRC) and protein content). Inulin was incorporated to biscuits formulation in two levels: 6 and 12% (wheat replacement). Dough and biscuits quality was measured by spread rate during baking and biscuit factor, texture and surface colour. Inulin incorporation increased dough spreading and biscuit factor and decreased biscuit hardness. The enhancing effect of inulin was observed in all flour. The results confirmed the effect of inulin on biscuits obtained with all flour assayed, despite the differences in flour quality that was tested.

Maria S. Blanco Canalis, Alberto E. León, Pablo D. Ribotta

01.12.2016.

Professional paper

Texture analysis of blanched vegetables using high- and low-speed measuring methods

Quality reductions of raw and cooked vegetables are caused by forces generated during industrial high-speed manufacturing. However, the transferability of low-speed texture measurement methods to high speed processes is limited. Therefore, analyses with a low-speed uniaxial compression test (breaking strength σ, breaking strain ε) and a high-speed pendulum test (relative fracture height Δh) at different speeds (3.6, 4.4, 5.3 m s-1) were carried out. Textural values for potatoes, carrots and celeriacs (0 to 25 min cooking time) were recorded to compare the two measurement methods. Furthermore, whether the increase of textural values of blanched vegetables measured with low-speed methods, was also observable with high-speed methods, was also investigated. Low to medium rank correlation coefficients (rS < 0.659) between parameters of the two methods were calculated. In contrast to σ and ε, Δh-values indicate a distinct initial increase as well as textural maxima between 5.0 to 12.5 min cooking time for all tested potato and carrot varieties. On the other hand, most celeriac samples did not exhibit an increase in texture with respect to cooking time. Therefore, a textural analysis at high speeds is necessary for the prediction of textural characteristics of blanched vegetables during high-speed processing in order to reduce quality degradation.

Christian Schmitt, Thomas Friedl, Nadine Mattes, Uwe Grupa, Oliver Hensel

01.12.2016.

Professional paper

Extrusion cooking technology: Principal mechanism and effect on direct expanded snacks – An overview

The snack industry is one of the fastest growing food sectors and is an important contributor within the global convenience food market. Nowadays snacks and convenience foods are also consumed regularly in India. Properly designed convenience foods can make an important contribution to nutrition in societies where social changes are altering traditional patterns of food preparation. Extrusion cooking as a popular means of preparing snack foods based on cereals and plant protein foodstuff has elicited considerable interest and attention over the past 30 years. Several studies on the extrusion of cereals and pulses, using various proportions, have been conducted because blends of cereals and pulses produce protein enriched products. Special importance is placed on the physicochemical and chemical modifications of protein, starch and dietary fibre. Extruded products can be categorized for a particular application based on their functional properties such as water absorption and water solubility index, expansion ratio, bulk density and viscosity of the dough.Therefore, the literature was reviewed for effect of extrusion processing on product parameters, and nutritional and anti-nutritional properties of extruded products.

Ajita Tiwari, S. K. JHA

Indexed by