Grape berries are a good source of nutrients and nutraceuticals and have many benefits for human health. Growing interest in the export potential and consumption of a new grape (cv. Karaerik), cultivated as a table grape in Turkey, encouraged us to profile its major nutrient contents from six different locations. Due to its popularity, the nutritional value of this grape berry needs to be investigated to ascertain its potential economic and health benefits. The most abundant sugars in the grape berry were fructose and glucose (peel/whole fruit; averages 236.57 and 127.87, and 183.36 and 108.60 (g kg-1 fresh weight), respectively), while the major organic acids were tartaric and malic acids (7.17 and 2.81, and 2.61 and 1.76(g kg-1 fresh weight), respectively). Linoleic acid (peel/whole fruit/seed; 37.14, 33.12 and 57.83%, respectively) was the predominant fatty acid, while potassium (peel/whole fruit/seed; 9331.5, 10226.33 and 5354 mg/g dry weight, respectively) was the predominant mineral, followed by phosphorus (1592.8, 2672 and 3072.67) in the berry. Our results demonstrate that the nutrient components and physicochemical parameters varied significantly among the sampling locations. The grape berry contains considerable quantities of potentially beneficial healthy nutrients worthy of further evaluation.

The manufacture of food during distribution, a concept known as “made-in-transit” (MIT) manufacture, has the potential to expand the distribution range, extend shelf-life, and provide the customer with the freshest possible product. Benefits for the manufacturer include maximising throughput while minimising manufacturing space and inventory. This concept is new, with mushrooms being the only MIT food developed so far. The feasibility of developing an MIT product from a fermented food was reviewed using yoghurt as a model system. Through the alteration of some of the yoghurt manufacturing parameters (e.g. milk base formulation, heat treatment, starter culture composition and fermentation temperature) it is possible to develop this form of yoghurt production. A predictive microbiology approach is suitable for predicting the effects of both time and temperature on designing and predicting the fermentation process. This review demonstrates the potential of the MIT concept for a fermented food.

Four common phthalic acid esters (PAEs) levels in tea fusions samples prepared from three types of tea bags (green, black and white) of ten commercial brands were extracted from the infusions by a dispersive liquid-liquid micro extraction method and determined by GC-MS. PAEs were not found in white tea samples. Residue levels of total phthalic acid esters (TPAEs) in black and green teas showed no significant difference (median=367.5, Interquartile range=244.7-667.5 and median=381, Interquartile range=188.7-688.2µg/kg respectively). DEHP levels in green teas were significantly higher than those in black teas (Median= 93.5 and 204 respectively). Total phthalate esters (TPAEs) levels in flavored teas were about two-fold higher than in non-flavored teas. The four commercial brands tested contain significant levels of DEHP when compared to other brands. Essential oils and essences that were added to tea for improvement of color and taste could be the main sources of PAEs contamination.

If oral absorption of phthalates were assumed to be 100%, the maximum daily exposure levels to TPAEs via tea consumption (due to consumption of 5 cups of tea prepared from the tea containing the highest levels TPAEs) were estimated to be 230e−4 µg/kg bw/Day, which are far lower than the regulation levels set by the expert panels on regularly toxicity. 

Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg−1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energy used during production process. Conservation approach I resulted in mean energy of 72.08 ± 1.73MJkg−1 where electrical energy, manual energy and thermal energy accounted for 1.75MJ (3%) 7.34MJ (10%) and 62.99MJ (87%) respectively. Conservation approach II reduced the energy further to 57.24 ± 1.73MJkg−1 as the operation was thermal energy dependent, followed by manual and electrical energy with energy values of 48.13, 7.33 and 1.78MJ equivalent to 84.10%, 12.80% and 3.10% accordingly. Conclusively, traditional method of processing utilized highest energy (445.40MJ) followed by conservation approach I (72.08MJ) and conservation approach II (57.24MJ) was least in energy demand. Conservation approach II permits energy conservation to be 87% as compared with traditional method.

The aim of the study was to dry zucchini (Cucurbita pepo) by two different methods (convective hot-air (CHD) and microwave-assisted drying (MWD)). The effect of air temperature (60, 70 and 80°C), microwave (MW) power (180, 360, 540 W) and sample thickness (5 and 10 mm) on some drying characteristics of zucchini were investigated. Thirteen mathematical models available in the literature were fitted to the experimental moisture ratio data. The coefficients of the models were determined by non-linear regression analysis. It was determined that the model that fits the moisture ratio data the best varies at different drying conditions. Increasing drying temperature and MW power and reducing sample thickness improved the drying rate and drying time. Drying in microwave has reduced the drying time by 52-64% for zucchini. It was found that the effective moisture diffusivities increased with increasing temperature and MW power. MWD samples had better rehydration ratios compared to ones dried only in tray drier for 5 mm thickness.

One of the methods of improving the nutritional profile of baked-goods is the incorporation of dietary fibre (DF) to the formulation. However, DF retains more water than wheat flour which, affects dough rheological properties and thus the final product quality. Flour is the main ingredient in biscuits and contributes to the baked texture and shape of biscuits. There are large differences in quality among the flours from wheat cultivars and among non-wheat flours used for biscuit production. In previous works, different dietary fibres were tested and inulin was found to have a positive quality effect on biscuits made from an all-purpose wheat flour without the need of introducing significant changes in dough properties. To know whether these results are extended to different types of flours that can be used for biscuit production, this paper aimed to analyse the effects of different levels of inulin incorporation on dough and biscuits quality made from three different wheat flours and one triticale flour. Chemical and physic-chemical characterization of the flour samples was performed and compared (moisture, ashes, gluten, solvent retention capacity (SRC) and protein content). Inulin was incorporated to biscuits formulation in two levels: 6 and 12% (wheat replacement). Dough and biscuits quality was measured by spread rate during baking and biscuit factor, texture and surface colour. Inulin incorporation increased dough spreading and biscuit factor and decreased biscuit hardness. The enhancing effect of inulin was observed in all flour. The results confirmed the effect of inulin on biscuits obtained with all flour assayed, despite the differences in flour quality that was tested.

Research has shown that gum arabic from Acacia Senegal var. kerensis can be used in beef rounds, at a level of 2.5% of the formulated product weight, as a binder and texture modifier. However, the effect of gum arabic addition on the microbial quality and shelf life of the resulting meat product has not yet been reported. Thus, the objective of this work was to study the microbial quality of beef rounds containing 2.5% gum arabic and to study shelf life based on the growth parameters of Total Viable Counts (TVC) and Lactic Acid Bacteria (LAB). Beef round samples were injected at 30% with curing brines containing gum arabic and cooked through boiling. The growth kinetics of LAB and TVC were studied for vacuum packaged sliced beef round samples stored at 7 °C and 15 °C for a period of 21 days. Baranyi and modified Gompertz models were used to fit the LAB and TVC data obtained using DMFit. Results of microbial analysis indicated that coliforms, yeasts and molds as well as pathogenic bacteria; Salmonella, Escherichia coli, and Staphylococcus aureus, were below detection limit. In addition, TVC and LAB were found to be 1.87 ± 1.09 and 1.25 ± 0.75 Log10 CFU g−1 , respectively. The results of accuracy analysis showed that both the Baranyi and modified Gompertz models were adequate in representing the bacterial growth in beef rounds injected with curing brines containing gum arabic. The predicted shelf life was found to be between 84.3 – 88.1 h and 158.0 – 173.1 h at 15 °C and 7 °C, respectively. 

The food preservation hypothesis as impacted by overall packaging applications is considered in this work. The objective was to devise a decision supportive method for the selection of “just-right” packaging materials, techniques and procedures. For that, food preservation was critically approached in order to identify the optimum outcome at experimental and packaging selection decision-making levels. A mathematically supported and proven knowledge classification, and the establishment of a straightforward coherence mode among the principles of the natural systemic phenomena, were used. The ultimate aim of this work was to justifiably surpass a simple description of packaging according to its measurable specifications, and instead, engage its inherent properties into a cyclic 8-steps-process for eventually understanding its potential to support any particular preservation hypothesis in question. The proposed methodology includes primarily, the consideration of the study hypothesis and, in parallel, the conclusive remarks and claims with respect to the experimental factors involved (properties, parameters, relations and conditions). Considering the experimentally controlled set-ups that a researcher has to expose the food system to and the role of packaging in obtaining its preservation potential, our method supports the experimenters in selecting the experimental conditions under which the preservation hypothesis can be disclaimed and furthermore, it could indicate the way to reduce experimentation research waste.

This comparative study investigated some physical, milling and cooking properties of four new rice varieties (FARO 44, FARO 52, FARO 60 and FARO 61) in Nigeria. The varieties were processed into white rice and their properties analyzed separately using standard procedures. Results showed that paddy length, paddy-length-to-width-ratio, equivalent diameter, sphericity, grain volume, aspect ratio, thousand paddy grain weight, milled rice length, milled rice width, milled rice length to width ratio, milling recovery, head milled rice, broken milled rice, L*, a*, b*, elongation ratio, cooked-rice-lengthto-breadth ratio, water uptake ratio and cooking time were significantly different (p<0.05) for all the varieties. Milling recovery was found to vary from 65.3 to 68.33%; with FARO 60 having the highest head milled rice. It was observed that FARO 44 had the longest cooking time, elongation ratio and cooked rice length/breadth ratio while FARO 61 was found to have the highest water uptake ratio. There was significant positive correlation (r = 0.824) between percentage head milled rice and milling recovery while negative correlation existed between cooking time and L* (r = - 0.711). This information could be exploited by rice processors in the post-harvest processing of the varieties.

Acha is a less utilized cereal grain in Africa. Scaling up of the processing technology of acha seeds is desirable if accurate information on effect of processing on its properties is available. This study investigated the effect of cooking duration on the chemical and physical properties of acha seeds. Cooking times (2.5, 5, 7.5 and 10 minutes) at 100°C were used. The volume, length, breadth, thickness, porosity, density, sphericity, aspect ratio, specific heat capacity, thermal conductivity, thermal diffusivity, moisture, protein, fat, ash, crude fibre and carbohydrate were determined using standard methods. Data were analysed using ANOVA at p = 0.05. The results obtained revealed that varietal difference had a significant effect on volume, length, breadth, thickness, true density, bulk density, porosity, sphericity and aspect ratio. The moisture content, ash, protein, crude fibre, fat, carbohydrate, specific heat capacity, thermal conductivity and thermal diffusivity varied from 8.80 - 56.17 %, 0.32 - 1.87%, 1.92 - 11.50%, 0.29 - 1.58%, 0.32 - 2.81%, 40.94 - 76.26%, 1.66 -2.97 kJkg−1K −1 , 0.26 -0.43 Wm−1K −1 and 0.85 x 10−7 - 1.17 x 10−7 ms−2 respectively, as significantly influenced by cooking time. Cooking for 7.5 minutes was appropriate using the moisture uptakes and thermal properties as criteria.