Current issue

Issue image

Volume 13, Issue 2, 2024

Online ISSN: 2182-1054

Volume 13 , Issue 2, (2024)

Published: 18.10.2024.

Open Access

All issues

More Filters

Contents

18.10.2018.

Original scientific paper

Antioxidant activities of aqueous extracts from nine different rose cultivars

Rose petals have been applied as food additives in teas, cakes and flavor extracts. The aim of this research study was to explore and reveal the antioxidant potential of aqueous extracts of rose petals belonging to nine genotypes of rose (wild as well as hybrid). The in vitro antioxidant activities of roses were studied by lipid peroxidation assay, DPPH radical scavenging assay, iron chelation assay, phosphomolybdenum reduction assay and total phenolic and flavonoid contents. The aqueous extract showed inhibition against lipid peroxidation (TBARS), induced by prooxidants (10 µM FeSO4) in mice liver homogenate. The free radical scavenging activities of the extracts were determined by scavenging of the DPPH radical. Extracts also showed metal chelating activities and high antioxidant activity in the phosphomolybdenum assay. The high content of phenolics and flavonoids detected in aqueous extracts may be responsible for the antioxidant activity. Amongst the different rose genotypes, screened, Rosa moschata (musk rose) was found to carry slightly higher antioxidant potential, owing to its higher phytochemical content.

Hamadia Khurshid, Syed Mubashar, Shahid Iqbal Awan, Syed Rizwan Abbas, Muhammad Irshad

18.10.2018.

Original scientific paper

Extraction kinetics of saponins from quinoa seed (Chenopodium quinoa Willd)

Quinoa has higher protein content (11-16% m/m) and better amino acid profile than cereals and represents a valuable resource for healthy nutrition. The aim of this work was to study the saponins extraction kinetics during washing of soaked quinoa. The experimental curves of saponins content as a function of time was measured at water temperatures of 20, 40, 60, and 70ºC. A spectrophotometric method was proposed to determine total saponins content, while an unsteady state diffusional model was applied to this extraction problem, assuming strict internal control to the mass transfer rate. As a first analysis, the complete analytical solution for constant diffusion coefficient (Deff) using the initial radius (R0) provided an accurate predicted curve at each temperature. The diffusion coefficients (around 10−10 m2s-1), were correlated with temperature using an Arrhenius-type relationship to obtain an activation energy Ea  of 16.9 kJ mol-1.  The preliminary values of Ea and preexponential factor (D0) thus obtained were used as initial values of a second, more robust fitting where the whole dataset of saponins concentrations as a function of time for all temperatures. The Arrhenius equation was directly inserted into the diffusional solution. The following parameters were obtained: Ea= 17.2 kJ mol-1 and, D0= 3.232×107 m2 s-1, respectively with an overall r2=0.985. Saponins content agreed well with experimental values. As the equation is capable of predicting saponin extraction times for various operating conditions, it can be used within equipment design schemes.

R. M. Torrez Irigoyen, Sergio Giner

01.12.2017.

Professional paper

Energy pattern and conservations of condiment produced from soybean (Glycine max)

Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg-1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energy used during production process. Conservation approach I resulted in mean energy of 72.08 ± 1.73MJkg-1 where electrical energy, manual energy and thermal energy accounted for 1.75MJ (3%) 7.34MJ (10%) and 62.99MJ (87%) respectively.  Conservation approach II reduced the energy further to 57.24 ± 1.73MJkg-1  as the operation was thermal energy dependent, followed by manual and electrical energy with energy values of 48.13, 7.33 and 1.78MJ equivalent to 84.10%, 12.80% and  3.10% accordingly. Conclusively, traditional method of processing utilized highest energy (445.40MJ) followed by conservation approach I (72.08MJ) and conservation approach II (57.24MJ) was least in energy demand. Conservation approach II permits energy conservation to be 87% as compared with traditional method.

Ismaila B. Anjorin, Rahman Akinoso, Mayowa S. Sanusi

01.12.2017.

Professional paper

Examination of optimum test conditions for a 3-point bending and cutting test to evaluate sound emission of wafer during deformation

The purpose of this study was to investigate optimum test conditions of acoustical-mechanical measurement of wafer analysed by Acoustic Envelope Detector attached to the Texture Analyser. Force-displacement and acoustic signals were simultaneously recorded applying two different methods (3-point bending and cutting test). In order to study acoustical-mechanical behaviour of wafers, the parameters “maximum sound pressure”, “total count peaks” and “mean sound value” were used and optimal test conditions of microphone position and test speed were examined. With a microphone position of 45° angle and 1 cm distance and at a low test speed of 0.5 mm/s wafers of different quality could be distinguished best. The angle of microphone did not have significant effect on acoustic results and the number of peaks of the force and acoustic signal decreased with increasing distance and test speed.

Erdem Carsanba, Gerhard Schleining

18.10.2017.

Original scientific paper

Food science and technology students self-evaluate soft and technical skills

Food Scientists and Technologists (FS&T) need diverse skills in the globalized food and drink sector: Food-specific or scientific / technical skills and generic or intuitive soft skills. This study determined how satisfied FS&T students were with overall improvement, and in key technical and soft skills, based on their university work; and if satisfaction was linked to geography, degree in progress, anticipated degree, anticipated work place or anticipated job responsibility. An on-line survey was completed by 267 students in over 20 countries using a 5-point Likert scale to evaluate satisfaction. Responses were analyzed by the Friedman or Kruskal Wallis tests for more than two groups, otherwise by the Wilcoxon Signed Rank or Mann-Whitney tests. There were no differences in Overall Satisfaction with technical and soft skills training. Among soft skills, training in Working with Others and Being Responsible were more often rated “Excellent” and students were more satisfied with their training than with Solving Problems, Communication and Positive Attitude. Students anticipating a job with high responsibility were more satisfied with overall soft skill training and with 3 of the 5 specific soft skills. Among technical skills, students were more satisfied with improvement in basic sciences (Microbiology, Chemistry, Processing, Safety), and those in Northern Europe were more satisfied with overall technical training. These data show variations in perception and/or efficacy of technical and soft skill training in Food Science programmes and underline the need for separate attention to the incorporation of soft skill training into the design of FS&T courses.

Katherine M. Flynn, Peter Ho, Margarida C. Vieira, Paola Pittia, Marco Dalla Rosa

18.10.2017.

Original scientific paper

Effect of tuna skin gelatin-based coating enriched with seaweed extracts on the quality of tuna fillets during storage at 4 °C

Nowadays, consumers demand high quality food products with an extended shelf-life without chemical additives. Edible coatings (EC) containing natural compounds are a promising preservation technology for raw seafood without compromising fresh-like appeal and nutritional content. The aim of this work was to evaluate the effect of Thunnus obesus skin gelatin-based EC containing Codium spp. or Fucus vesiculosus extracts on raw tuna preservation. Three gelatin-based EC (gelatin (5 %) + glycerol (25 %); gelatin (5 %) + Codium spp. (1 %) + glycerol (25 %); gelatin (5 %) + Fucus vesiculosus (1 %) + glycerol (25 %)) were applied directly on the surface of tuna fillets. Functional properties of gelatin and gelatin-based EC containing seaweed extracts were also studied. The gelatin was extracted by an acid-swelling process in the presence/absence of pepsin, followed by subsequent heating/refrigeration, after a pre-treatment with NaOH. The type of acid, temperature and concentration of NaOH greatly influence the process yield. The higher extraction yield was achieved using acetic acid in the presence of pepsin by subsequent refrigeration, especially when skins were previously treated with NaOH (0.2 M). Tuna quality was assessed over 12 days of storage at 4 ± 1 °C in terms of chemical and microbial indices. Results showed that tuna skin gelatin-based EC avoids tuna deterioration. Microbial growth, assessed by total viable counts, and total volatile basic nitrogen were maintained below the maximum limits recommended, contrarily to the control. Additionally, the use of EC increased the stability of red colour during storage.

Milene Vala, Ana Augusto, Andre Horta, Susana Mendes, Maria M. Gil

18.10.2017.

Original scientific paper

Effect of Grewia venusta FRESEN mucilage on the proximate composition, physical and sensory properties of bread produced from wheat and cassava composite flours

Wheat and cassava composite breads are generally associated with volume and textural defects in contrast with the traditional wheat based variants. Efforts to mitigate this challenge through use of synthetic additives have been unsuccessful owing to safety concerns. The objective of this study was to explore Grewia venusta mucilage as a potential natural additive in wheat-cassava composite bread production. Sweet cassava flour was used to replace wheat flour at 100: 0 (control), 90:10, 80:20 and 70:30% ratios in bread making. Aqueous extract of G. venusta stem bark was oven dried (50±3 °C), milled and added at 0, 1.0 and 2.0% (w/w) to the flour mixtures. These, along with other conventional inputs were mixed, and used to produce bread. Proximate compositions, physical and sensory properties of the bread loaves were evaluated. Cassava flour inclusion resulted in significant (P≤0.05) decrease in the protein content of the control from 18.1% to 12.1% (90:10%), 11.5% (80:20%) and 9.9% (70:30%). Addition of mucilage marginally increased the protein and dietary fibre contents of the loaves. Loaves containing 1-2% mucilage were more regular in shape with smoother crust than those without mucilage. Cassava flour addition at 10%, 20% and 30% decreased loaf height from 6.0 cm to 5.8 cm, 5.7 cm and 5.5 cm, as well as loaf volume from 815.5 cm3 to 783.1 cm3 , 776.8 cm3 and 744.5 cm3 , respectively. Mucilage inclusion resulted in increased heights and volumes of the loaves and reduced weights of loaf fragments upon slicing. The mucilage significantly improved the texture of the bread loaves.

Arubi P. Alobo, Gibson L. Arueya

01.12.2016.

Professional paper

Texture analysis of blanched vegetables using high- and low-speed measuring methods

Quality reductions of raw and cooked vegetables are caused by forces generated during industrial high-speed manufacturing. However, the transferability of low-speed texture measurement methods to high speed processes is limited. Therefore, analyses with a low-speed uniaxial compression test (breaking strength σ, breaking strain ε) and a high-speed pendulum test (relative fracture height Δh) at different speeds (3.6, 4.4, 5.3 m s-1) were carried out. Textural values for potatoes, carrots and celeriacs (0 to 25 min cooking time) were recorded to compare the two measurement methods. Furthermore, whether the increase of textural values of blanched vegetables measured with low-speed methods, was also observable with high-speed methods, was also investigated. Low to medium rank correlation coefficients (rS < 0.659) between parameters of the two methods were calculated. In contrast to σ and ε, Δh-values indicate a distinct initial increase as well as textural maxima between 5.0 to 12.5 min cooking time for all tested potato and carrot varieties. On the other hand, most celeriac samples did not exhibit an increase in texture with respect to cooking time. Therefore, a textural analysis at high speeds is necessary for the prediction of textural characteristics of blanched vegetables during high-speed processing in order to reduce quality degradation.

Christian Schmitt, Thomas Friedl, Nadine Mattes, Uwe Grupa, Oliver Hensel

01.12.2016.

Professional paper

Extrusion cooking technology: Principal mechanism and effect on direct expanded snacks – An overview

The snack industry is one of the fastest growing food sectors and is an important contributor within the global convenience food market. Nowadays snacks and convenience foods are also consumed regularly in India. Properly designed convenience foods can make an important contribution to nutrition in societies where social changes are altering traditional patterns of food preparation. Extrusion cooking as a popular means of preparing snack foods based on cereals and plant protein foodstuff has elicited considerable interest and attention over the past 30 years. Several studies on the extrusion of cereals and pulses, using various proportions, have been conducted because blends of cereals and pulses produce protein enriched products. Special importance is placed on the physicochemical and chemical modifications of protein, starch and dietary fibre. Extruded products can be categorized for a particular application based on their functional properties such as water absorption and water solubility index, expansion ratio, bulk density and viscosity of the dough.Therefore, the literature was reviewed for effect of extrusion processing on product parameters, and nutritional and anti-nutritional properties of extruded products.

Ajita Tiwari, S. K. JHA

01.12.2016.

Professional paper

In vitro investigation of antioxidant activities of Launea taraxacifolia and Crassocephalum rubens

Launea taraxacifolia and Crassocephalum rubens are among many wild, underutilized and under cultivated vegetables in Nigeria that are at risk of extinction. Total flavonoid contents (TFC), total phenolic contents (TPC), and antioxidant activities of different concentrations (1-5 mg ml-1) were evaluated; using in vitro assays to assess the scavenging properties of 2, 2-diphenyl-1-picryl hydrazyl (DPPHRSP), nitric oxide (NORSP) and hydroxyl (OHRSP). Phenolic profiles of the alcoholic extracts were characterized using high-performance liquid chromatography techniques. The results revealed higher TFC (mg/100g RE) in aqueous (6.06± 0.02-78.79±0.01) than alcohol extracts (with methanol 0.93±0.01—12.73±0.04, and with ethanol -0.85±0.01-- 7.70±0.03). In a similar trend, OHRSP (%) was higher in aqueous extracts (40.83±0.10--91.74±0.19) than alcoholic extracts (with methanol -11.67±0.3-- 30.83±0.06; and with ethanol -14.42±0.06- 40.27±0.05). TPC (mg/100g GAE) which was higher in alcoholic extracts (with methanol -21.48±0.01--133.20±0.16 and with ethanol -9.45±0.01--59.73±0.02) than aqueous extracts (14.83±0.01--52.64±0.03) was in agreement with the trend observed for NORSP (28.24±0.05-151.76±0.08 for methanolic extracts, 21.99±0.13--49.93±0.04 for ethanolic extracts and 38.47±0.11--86.15±0.05 for aqueous extracts). DPPHRSP was also higher in alcoholic extracts (methanolic -22.81±0.01-48.41±0.05 and ethanolic-- 14.53±0.01-62.68±0.07) than aqueous extracts (13.66±0.13--42.86±0.03). TFC, TPC and antioxidant activities showed concentration dependent increase and strong positive correlation with TFC (r= 0.926 – 0.997and r= 0.432 – 1.000) and TPC (r= 0.825 – 0.999 and r= 0.473 - 0.994) for L. taraxacifolia and C. rubens respectively. Caffeic acid, chlorogenic acid, ellagic acid, quercetin and kaempferol were identified as major phenolic components in the extracts. The vegetables have high antioxidant potential for promoting good health; which could be attributed to the identified phytochemicals in them. 

Funmilayo B. Borokini, Lajide Labunmi

Indexed by