Noodle consumption has been increasing in Nigeria as a result of rapid urbanization, increase in population growth, and desire for convenience food. Noodles are produced from wheat our which is not grown in Nigeria. In order to reduce wheat imports and improve utilization of local crops, various options have been developed to replace wheat flour partially or wholly in noodle production. This study was aimed at optimizing the level of major ingredients to obtain the best flour blend for noodle preparation with optimum nutritional quality. Pro-vitamin A cassava roots (Manihot esculenta Crantz) and African yam bean seeds (AYB) (Sphenostylis stenocarpa) were processed into ours. The ranges of these flours, based on preliminary findings, were computed into a central composite design of Response Surface Methodology (RSM) to obtain 13 flour blends with five central points. The chemical compositions, anti-nutritional factors, and pasting properties of these flour blends were analyzed and measured. By maximizing total β-carotene, protein content, and minimizing fat content, the predicted model indicated the optimum blend of 70.52% cassava flour to 29.48% AYB flour. The best our blend sample of 69.23% cassava our to 30.77% AYB flour gave the actual value of total β-carotene 6.76 μg/g, with proximate analysis composition of protein 6.17%, fat 0.82%, moisture 8.95%, ash 1.77%, crude fiber 5.09%, and carbohydrate 82.30%. The anti-nutritional factors of the best blend were 8.21 mg HCNeqv/kg, 1.69 mg phytate/g and 0.37 mg tannin/g.

This work examined the relationships between quality characteristics of raw milk and climatic conditions. Over a period of three years, a total of 5,065 samples were collected encompassing two types of farms. The quality characteristics analysed were titratable acidity (TA), total plate count (TPC) and somatic cells count (SCC). Climatic conditions were evaluated in respect to the outdoor air temperature, pressure, humidity and precipitation. Big farms showed a stronger correlation between TA and climatic conditions as opposed to SCC and climatic conditions. TPC was out of limit in big farms when the outdoor air temperature was higher than 19.8 °C (p<0.05) and during periods with accumulated precipitation over 4.2 mm (p>0.05). Small farms showed a stronger correlation between SCC and climatic conditions as opposed to TA. In these farms, occurrence of acidity out of limit was detected in less than 7.2% of samples. Samples with TA out of limit were observed when air temperature was higher than 18.4 °C (p<0.05) and accumulated precipitation was below 3.1 mm (p>0.05). These results can be used to improve good agricultural practices in respect to climatic conditions and size of farms.

The objective of this work was to study the effect of osmotic drying, using different hypertonic solutions (sucrose and sodium chloride), on physicochemical characteristics of pansies (Viola Ö wittrockiana). The same treatments were applied to lettuce to compare the behavior of flowers with other vegetables. Pansies’ superhydrophobic surface structure, called papillae, increased the resistance to exchanges with hypertonic solutions. No weight loss was observed after most treatments (sucrose: between 2.2 and 6.8 %; NaCl: between -23.0 % and 1.5 %), aw maintained high values (> 0,94) and monomeric anthocyanins were preserved (fresh 0.10 and 0.19 mg Cy-3glu/g fresh matter for 20%/1 h in NaCl and 60%/1 h in sucrose). When applying more drastic conditions, as sodium chloride for more than 1 hour, undesirable textural and color changes were observed. For lettuce, all treatments caused osmotic dehydration, weight loss (ranged between -9.3 to -30.3 % for 80%/1 h in sucrose and 15%/1 h in NaCl) and a reduction in aw (< 0,97) and carotenoids, with sodium chloride causing more damage in visual appearance than sucrose. Therefore, immersion in osmotic solutions can be applied to lettuce but the desired effect was not achieved for pansies due to the morphological structure of the flowers’ epidermis.

The increase in relative level of education and the growing middle-class income earners in Nigeria have made packaged food items attractive to consumers. These foods provide handy, nutritious and convenient food for consumers; however, they also come with public health concerns. From a policy perspective, food labelling can gauge consumers’ response to the safety conditions of packaged food. However, understanding consumers’ awareness and the use of food label information has attracted little research attention in many developing countries in sub-Saharan Africa. In this study, we investigated consumers’ awareness of the use of food safety labels in Lagos state, Nigeria. We used primary data collected using pretested structured questionnaire from 220 food shoppers who bought pre-packaged foods. A two-stage sampling technique was used to select the respondents. Consumers’ awareness and use of food safety information was revealed using descriptive statistics; Ordinal Regression Analysis was used to examine the socioeconomic factors determining the frequency of reading food safety labels. We found evidence of the influence of socioeconomic characteristics on how consumers read food labels. The study therefore recommends that there should be continuous awareness campaigns on the importance of food labels in ensuring safety and food producers should make sure their food labels are legible.

The purpose of the study was to evaluate the effects of Syrian Kaissy olive oil (SKOO) adulteration and long storage periods on the basic quality indices namely, peroxide value (PV), acid value (AV), and absorbance of UV (K232, K270, ∆K and R (K232/K270) values). This study revealed that the quality indexes, including AV, PV, K232, K270 and ∆K values, of all SKOO specimens increased with increasing storage time. It was revealed that the K232, K270 and ∆K values of SKOO specimens stored for 1 and 2 years remained under the limits, established by International Olive Council (IOC), of 2.5, 0.22 and 0.01 units, respectively. While in some cases, the K232, K270 and ∆K values exceeded their respective limits after 8, 9 and 10 years of storage. The index of R (K232/K270) decreased with time of storage.

Currently, nanoencapsulation of bioactive compounds is promising, and is one of the methods that has been proven very effective. The development of food-grade nanoemulsions is in a state of constant innovation due to the interesting features that this method of encapsulation has, such as small droplet size, kinetic stability and appearance. With this technology, it is possible to control some food properties, such as texture, taste and stability. In this article, we present a review of the most commonly used methods in the creation of nanoemulsions, the recent developments of these dispersions, the relevant applications of nanoemulsions in food matrices, the most commonly used food-grade materials and the functionality of nanoemulsions, which are designed primarily to encapsulate compounds with biological activity. Nanoemulsions have been shown to be effective in preventing degradation and improving the bioavailability of bioactive compounds, such as oil-soluble vitamins, antimicrobials, flavours and antioxidants. At the end of this article, facts of interest about acceptance issues and nanotechnology regulatory policies in the food industry are presented.

Drying conditions of black tea using superheated steam (SHS) were optimized based on a central composite design (CCD) of response surface methodology (RSM). The effects of independent variables (temperature and time) towards the total phenolic content (TPC), scavenging free radical ability, ferric-reducing antioxidant power assay and sensory attributes (infusion colour, aroma, flavour and astringency) were analysed using regression polynomial equations. Analysis of variance (ANOVA) showed that a quadratic model fitted the experimental design well, with a p-value less than 0.05 and a highest coefficient of 0.9474. The optimum drying conditions were achieved at 166.7oC and 21.2 minutes where the experimental values were in accordance with predicted values, with percentage errors (PE) less than 10%. Temperature (140oC – 180oC) was concluded to have the most significant effect and showed a positive direction in most responses. This effect was definitely able to support the application of a SHS dryer for the quality production (antioxidant and sensory properties) of black tea.

The aim of this work was to study the effect of UV-C radiation on ultrasound assisted extraction (UAE) of cherry tomato bioactive compounds. Cherry tomatoes were exposed to two UV-C radiation doses (0.5 and 1.0 J cm−2 ) and stored at 20 ± 0.5 oC for 7 days. Next, they were lyophilized, and the bioactive compounds were extracted by UAE at 20 KHz. To evaluate the effectiveness of the extraction process of the bioactive compounds, a CCRD (central composite rotational design) was used together with RSM (response surface methodology), for extraction times from 4 to 12 minutes and concentrations (g of lyophilized product / L of ethanol) of 1:10, 1:20 and 1:30. The extracts obtained from the irradiated tomatoes presented 5.8 times more lycopene content than the controls and higher antioxidant activity was obtained for 4 and 8 min, in the concentrations 1:10 and 1:20 (m v −1 ). Through numerical model optimization, optimal extraction conditions were obtained. The results demonstrated that by previously irradiating tomatoes with UV-C light, the UAE yielded considerably higher amounts of lycopene and other bioactives.