Research has shown that gum arabic from Acacia Senegal var. kerensis can be used in beef rounds, at a level of 2.5% of the formulated product weight, as a binder and texture modifier. However, the effect of gum arabic addition on the microbial quality and shelf life of the resulting meat product has not yet been reported. Thus, the objective of this work was to study the microbial quality of beef rounds containing 2.5% gum arabic and to study shelf life based on the growth parameters of Total Viable Counts (TVC) and Lactic Acid Bacteria (LAB). Beef round samples were injected at 30% with curing brines containing gum arabic and cooked through boiling. The growth kinetics of LAB and TVC were studied for vacuum packaged sliced beef round samples stored at 7 °C and 15 °C for a period of 21 days. Baranyi and modified Gompertz models were used to fit the LAB and TVC data obtained using DMFit. Results of microbial analysis indicated that coliforms, yeasts and molds as well as pathogenic bacteria; Salmonella, Escherichia coli, and Staphylococcus aureus, were below detection limit. In addition, TVC and LAB were found to be 1.87 ± 1.09 and 1.25 ± 0.75 Log10 CFU g−1 , respectively. The results of accuracy analysis showed that both the Baranyi and modified Gompertz models were adequate in representing the bacterial growth in beef rounds injected with curing brines containing gum arabic. The predicted shelf life was found to be between 84.3 – 88.1 h and 158.0 – 173.1 h at 15 °C and 7 °C, respectively. 

The food preservation hypothesis as impacted by overall packaging applications is considered in this work. The objective was to devise a decision supportive method for the selection of “just-right” packaging materials, techniques and procedures. For that, food preservation was critically approached in order to identify the optimum outcome at experimental and packaging selection decision-making levels. A mathematically supported and proven knowledge classification, and the establishment of a straightforward coherence mode among the principles of the natural systemic phenomena, were used. The ultimate aim of this work was to justifiably surpass a simple description of packaging according to its measurable specifications, and instead, engage its inherent properties into a cyclic 8-steps-process for eventually understanding its potential to support any particular preservation hypothesis in question. The proposed methodology includes primarily, the consideration of the study hypothesis and, in parallel, the conclusive remarks and claims with respect to the experimental factors involved (properties, parameters, relations and conditions). Considering the experimentally controlled set-ups that a researcher has to expose the food system to and the role of packaging in obtaining its preservation potential, our method supports the experimenters in selecting the experimental conditions under which the preservation hypothesis can be disclaimed and furthermore, it could indicate the way to reduce experimentation research waste.

This comparative study investigated some physical, milling and cooking properties of four new rice varieties (FARO 44, FARO 52, FARO 60 and FARO 61) in Nigeria. The varieties were processed into white rice and their properties analyzed separately using standard procedures. Results showed that paddy length, paddy-length-to-width-ratio, equivalent diameter, sphericity, grain volume, aspect ratio, thousand paddy grain weight, milled rice length, milled rice width, milled rice length to width ratio, milling recovery, head milled rice, broken milled rice, L*, a*, b*, elongation ratio, cooked-rice-lengthto-breadth ratio, water uptake ratio and cooking time were significantly different (p<0.05) for all the varieties. Milling recovery was found to vary from 65.3 to 68.33%; with FARO 60 having the highest head milled rice. It was observed that FARO 44 had the longest cooking time, elongation ratio and cooked rice length/breadth ratio while FARO 61 was found to have the highest water uptake ratio. There was significant positive correlation (r = 0.824) between percentage head milled rice and milling recovery while negative correlation existed between cooking time and L* (r = - 0.711). This information could be exploited by rice processors in the post-harvest processing of the varieties.

Acha is a less utilized cereal grain in Africa. Scaling up of the processing technology of acha seeds is desirable if accurate information on effect of processing on its properties is available. This study investigated the effect of cooking duration on the chemical and physical properties of acha seeds. Cooking times (2.5, 5, 7.5 and 10 minutes) at 100°C were used. The volume, length, breadth, thickness, porosity, density, sphericity, aspect ratio, specific heat capacity, thermal conductivity, thermal diffusivity, moisture, protein, fat, ash, crude fibre and carbohydrate were determined using standard methods. Data were analysed using ANOVA at p = 0.05. The results obtained revealed that varietal difference had a significant effect on volume, length, breadth, thickness, true density, bulk density, porosity, sphericity and aspect ratio. The moisture content, ash, protein, crude fibre, fat, carbohydrate, specific heat capacity, thermal conductivity and thermal diffusivity varied from 8.80 - 56.17 %, 0.32 - 1.87%, 1.92 - 11.50%, 0.29 - 1.58%, 0.32 - 2.81%, 40.94 - 76.26%, 1.66 -2.97 kJkg−1K −1 , 0.26 -0.43 Wm−1K −1 and 0.85 x 10−7 - 1.17 x 10−7 ms−2 respectively, as significantly influenced by cooking time. Cooking for 7.5 minutes was appropriate using the moisture uptakes and thermal properties as criteria.

This review is a presentation of data gathered on the interactions of several polyphenolics (i.e., phenolic acids, stilbenes, flavonoids) with lipid bilayers of different lipid compositions. These polyphenolics have been investigated through a combination of fluorescence spectroscopy, electron paramagnetic resonance spectroscopy, and differential scanning calorimetry, to detect changes in membrane fluidity. Among the investigated phenolic acids, the least polar phenolic acid, p-coumaric acid, has the greatest effect on lipid membrane structure. It appears to have a greater ability to cross membranes by passive transport than more polar phenolic acids. On the other hand, among the flavonoids that have been studied, the anthocyanins cyanidin-3-glucoside and its aglycone are inactive. All of the flavonols tested, except for epigallocatechin-3-gallate, promote small decreases in membrane fluidity. Computer simulation of electron paramagnetic resonance spectra for flavonoids indicated two or three regions in the phosphatidylcholine/ phosphatidylserine (2.4:1) membrane with different fluidity characteristics. The effects of the different flavonoids are correlated to their structural characteristics, whereby even the difference in one -OH group can be important, as can the number of H-bonds they form. The role of membrane composition and flavonoid structure in these interactions with lipid membranes are of great importance for bioavailability of these compounds and for their biological effects in an organism.

Food Scientists and Technologists (FS&T) need diverse skills in the globalized food and drink sector: Food-specific or scientific / technical skills and generic or intuitive soft skills. This study determined how satisfied FS&T students were with overall improvement, and in key technical and soft skills, based on their university work; and if satisfaction was linked to geography, degree in progress, anticipated degree, anticipated work place or anticipated job responsibility. An on-line survey was completed by 267 students in over 20 countries using a 5-point Likert scale to evaluate satisfaction. Responses were analyzed by the Friedman or Kruskal Wallis tests for more than two groups, otherwise by the Wilcoxon Signed Rank or Mann-Whitney tests. There were no differences in Overall Satisfaction with technical and soft skills training. Among soft skills, training in Working with Others and Being Responsible were more often rated “Excellent” and students were more satisfied with their training than with Solving Problems, Communication and Positive Attitude. Students anticipating a job with high responsibility were more satisfied with overall soft skill training and with 3 of the 5 specific soft skills. Among technical skills, students were more satisfied with improvement in basic sciences (Microbiology, Chemistry, Processing, Safety), and those in Northern Europe were more satisfied with overall technical training. These data show variations in perception and/or efficacy of technical and soft skill training in Food Science programmes and underline the need for separate attention to the incorporation of soft skill training into the design of FS&T courses.

The main goal of this paper was to conduct an exploratory study regarding consumer preference in the field of Food Science and Technology. Two questions guided this study: Is it possible to identify a trail of crumbs concerning consumer behavior in the Food Science and Technology field? And, if that trail exists, where is it leading academia in terms of research trends of interest? A bibliometric study was conducted using an analysis software called CiteSpace. The use of this methodology ensured the impartiality of the literature review of the topic of interest. A survey of all articles indexed in Web of Science between 1993 and 2013 regarding consumer behaviour was carried out. In total, 1,786 articles were analyzed. The recent increased concern regarding consumer behavior was evident. With the USA and Spain having a significant role in driving the trail. Eight other countries that exhibited similar influences are: Italy, England, Australia, Germany, Denmark, France, Netherlands and Brazil. The research trends observed were grouped into seven major hot topics: sensory, health, safety, willingness to pay, packaging, ethics, and lifestyle/convenience. However, the development of publishing trends depended on where the research was carried out. A final suggestive finding, demonstrated that scientific knowledge does not occur in a vacuum.

The effects of heat blanching and UV-C light followed by heat on Portuguese cabbage peroxidase (POD), colour and texture were studied in the temperature range of 80-95 °C. POD inactivation, lightness (L) and yellowness (b) colour changes were described by a first-order reaction model. The greenness (a) colour and texture (firmness) changes followed a two fraction kinetic model behaviour. The temperature effect was well described by the Arrhenius law. At lower temperatures the combined treatment showed higher POD inactivation. Colour and texture parameters did not show significant differences between treatments. Long processing times turned the leaves slightly darker, decreased greenness, yellowness and firmness. Short processing times increased the firmness and greenness of the leaves. The treatment at 80 °C for 90 seconds reduced 90% of POD, retaining 98% of lightness and 92% of yellowness and improved the green colour (130%) and firmness (125%). At 80 °C the heat blanching required 7.4 min to inactivate 90% of the enzyme activity, reducing lightness, greenness, yellowness and firmness to 92%, 68%, 62% and 61%, respectively. The present findings will help to optimize the Portuguese cabbage blanching conditions.