In this study, the retention of vitamin C in fresh broccoli stored at different temperatures (i.e. chiller, room, cooking, and roasting or baking; 5-120oC) was investigated. The thermal stability of vitamin C in broccoli was analysed at 5, 20, 45, 60, 70, 80, 110, and 120oC. The vitamin C content was measured by the indophenol titration method. Vitamin C was affected negatively at all stored temperatures. The degradation of vitamin C was modelled by first-order reaction kinetics and the reaction rate constants were observed as 9.03Ö10−8 and 5.65Ö10−3 s −1 when stored at 5oC and 120oC, respectively. The activation energy was estimated as 74.2 kJ/mol within the temperature range used in this study. The lowest decay of vitamin C was observed during the chilling condition. The data on retention of vitamin C in broccoli could be used to determine their stability, when stored as raw, and when heated at different temperatures.

In this study, the effect of processing methods on the nutritional quality and functional properties of cashew (Anacardium occidentale Linn) kernels were investigated. The kernels were soaked, autoclaved, roasted or germinated at varying time duration; raw kernel served as control. The samples were analysed for chemical, mineral bioavailability and functional properties. Data was subjected to analysis of variance and means were separated by the Duncan multiple range test. The result of chemical composition analyses revealed that raw cashew kernels contained 3.55±0.08% moisture, 21.3±0.05% protein, 45.0±0.15% fat, 2.53±0.02% fibre, 1.59±0.02% ash, 26.1±0.01% carbohydrate, 521.75 Kcal/g energy, 2210.09±0.02mg/kg calcium, 1712.54±0.03mg/kg magnesium, 60.04±0.01 mg/kg iron and 36.74±0.02mg/kg zinc. Tannin, phytate and oxalate concentrations in the raw cashew kernel were 10.14±0.03 mg/kg, 99.30±0.02mg/kg and 11.03±0.03mg/kg respectively. Increased fat, ash and fibre levels were noted for treated samples compared to raw kernels. Mineral concentrations were increased significantly by various treatments compared to raw kernel; however, germination resulted in the highest increase of mineral content. A reduction trend was observed in phytate, oxalate and tannin concentrations in the treated samples with respect to increased processing time. Consequently, various treatments influenced the bioavailability of mineral elements. Treated samples exhibited significant differences in loose and packed bulk densities, water and oil absorption capacities when compared to raw kernels. Germination shows potential to generate not only much needed nutrients in cashew for human development, but also improved bioavailability of nutrients and functionality compared to other processing methods. This approach can used in Community Nutrition and Emergency Feeding Programmes, in developing countries, where the consequence of anti-nutritional factors may worsen the incidence of malnutrition and disease.

The present work aimed to: i) find the suitable proportion, based on sensory evaluation, of microwave-convective hot air dried jamun (Syzygium cumini L.) pulp and seed kernel powder to be mixed for the preparation of jamun powder (JP); ii) generate and model the moisture sorption isotherm (MSI) of JP; and iii) estimate net isosteric heat of sorption (qst), spreading pressure (Φ), net integral enthalpy (Qin), and net integral entropy (Sin). To formulate JP, the proportion (w/w, db) comprising 2% kernel and 98% pulp powder was the most desirable. The Peleg model was the best fit to MSI of JP. The qst decreased following linear relationship from 11.02 kJ. mol−1 at 5% equilibrium moisture content (EMC) to 0.27 kJ. mol−1 at 30% EMC. The Φ increased with increase in water activity and decreased with increase in temperature from 25 oC to 35 oC, and the values of Φ at 45 oC were even higher than at 25 oC. Net integral enthalpy (Qin) initially decreased till 6% moisture content in JP and displayed an increasing trend with further increase in moisture content. On the contrary, Sin kept on decreasing continually with increasing moisture content. The moisture zone of 7-11% was considered safe for storage of JP within the temperature range of 45-25 oC.

The present investigation was designed to characterize the phenolic profile of Lima beans (Phaseolus Lunatus) and also to evaluate the antioxidant indices: total phenolic content (TPC), total flavonoid content (TFC), ferric reducing antioxidant power (FRAP), 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and amino acid composition at different stages of simulated gastrointestinal digestion (oral, gastric, intestinal). High Performance Liquid Chromatography (HPLC-DAD) analysis revealed the presence of some phenolic compounds (gallic acid, catechin, caffeic acid, rutin, quercitrin, quercetin, kaempferol and apigenin), with a reduced amount (mg/g) after cooking: gallic acid (raw: 1.96 ± 0.02; cooked: 1.82 ± 0.01); catechin (raw: 0.83 ± 0.01; cooked: 0.73 ± 0.01); rutin (raw: 2.61 ± 0.03; cooked:1.74 ± 0.03); quercitrin (raw: 5.73 ± 0.01; cooked: 5.68 ± 0.01); apigenin (raw: 2.09 ± 0.01; cooked: 1.79 ± 0.02), with exception of quercetin (raw: 2.11 ± 0.02; cooked: 5.73 ± 0.02) and caffeic acid (raw: 2.08±0.04; cooked 2.95 ± 0.04). The results of the antioxidant indices of in vitro enzyme digested lima beans revealed higher values for cooked Lima beans compared to the raw counterpart, with a stepwise increase at the different stages of in vitro digestion, with the exception of ferric reducing antioxidant power; TPC (oral digestion: 65.44 ± 0.96; gastric digestion:134.87 ± 0.46; intestinal digestion: 517.72 ± 4.70; mg/g tannic acid equivalent), TFC (oral digestion: 199.30 ± 6.43; gastric digestion: 1065.97± 1.22; intestinal digestion: 3691.87 ± 4.2; mg/g quercetin equivalent), DPPH (oral digestion: 85800.00 ± 305.50; gastric digestion: 99066.66 ± 115.47; intestinal digestion: 211354.20 ± 360.84; µmol TE/g sample). The results also revealed a progressive increase in the antioxidant indices and amino acid composition (mg/kg) for both raw and processed lima beans at various stages of the in vitro digestion, with the intestinal phase of simulated digestion ranking higher. This implied that the Lima beans contained some essential amino acids and antioxidant molecules that would be readily available after passing through the gastrointestinal tract and could therefore be explored as functional food in the management of free radical mediated diseases.

In this study, seventeen (17) composite blends of broken rice fractions and full-fat soybean, formulated using response surface methodology and central composite design within a range of barrel temperatures (100-140oC), initial feed moisture content (15-25%) and soybean composition (8-24%), were extruded with a twin-screw extruder and the expansion and color indices were optimized. The results indicated a significant (p<0.05) effect of extrusion conditions on the responses. Fitted predictive models had coefficients of 88.9%, 95.7%, 97.3%, 95.4% and 95.2%, respectively, for expansion index, bulk density, lightness, redness and yellowness. The p-value and lack-of-fit tests of the models could well explain the observed variability and therefore could be used to establish production setting for the twin-screw extruder. The optimum extrusion conditions were found to be 130 oC (barrel temperature), 20% (feed moisture level) and 23% feed soybean composition and optimum responses in terms of bulk density, expansion index, lightness, redness and yellowness chroma indices were 0.21 g cm−3 , 128.9%, 17.1, 3.13 and 24.5, respectively. This indicates that optimum conditions can be established in twinscrew extrusion cooking of broken rice fractions and full-fat soybean composite blends that can result in product of low bulk and maximum expansion with a satisfactory light yellow product color that can be used to produce products that valorize broken rice and reduce qualitative postharvest loss.

African nutmeg, a possible local substitute for a commercial food flavourant, remains largely underutilized in Nigeria. Its application potential in cookie production was investigated in this study. African nutmeg (Monodora myristica) seed flour (ANM) was produced using a standard method. The flour was substituted for vanilla flavour (VFL) in ratio of 0, 1, 2, 3, and 3.5 g and functional properties of the flour blends (water absorption capacity (WAC), oil absorption capacity (OAC), and bulk density) were determined, using standard methods. Cookies were developed and characterized chemically, physically (colour) and organoleptically using the AOAC method, a colourimeter and sensory panellists respectively. Data were analysed using ANOVA at p<0.05. Replacement of vanilla with African nutmeg had no significant effect on bulk density (0.62 g cm−3 -0.68 g cm−3 ), but significantly affected WAC (133-142 %) and OAC (147-156 %) of flour blends. Crude protein (9.44-15.49 %), crude fat (3.17-6.50 %), total ash (2-2.73 %) and crude fibre (0.12-0.23 %) contents of the cookie increased, whilst metabolizable energy (385.33-367 kcal) decreased. There were reductions in pH (6.83-6.53) and TSS (5.80-1.20). Brown index of the snack increased with addition of nutmeg. Antioxidant indicators (flavonoids, DPPH and phenol) varied among cookie samples. Antinutrients, saponin, tannin and oxalate, were within tolerable limits. All cookie samples were judged acceptable by the panellists, with SLZ being the most acceptable. An acceptable and nutritious snack was produced at 100 % replacement. M. myristica seed could serve as substitute for vanilla in the production of cookies and other related snacks.

Native starch was extracted from nine germplasm collections of Araucaria angustifolia seeds in aqueous medium and they were characterized by Pasting Properties (RVA), X-ray Powder Diffractometry (XRD) and Scanning Electron Microscopy (SEM). The gelatinization process of each sample was evaluated at different ratios of starch:water by Differential Scanning Calorimetry (DSC). A slight displacement in the gelatinization curves was observed for the pinhão starches prepared with different amounts of water. With an increase in water content, most of the samples presented a decrease in the peak, the conclusion temperatures, and the range of gelatinization temperatures, while the enthalpy did not follow a standard behavior. A displacement or a narrowing of the gelatinization temperature range occurred with increasing water content. Pinhão starch showed pasting temperature in the range of 60-67 o C and there were differences in the pasting properties and degree of relative crystallinity between the analyzed samples. The C-type diffraction pattern was found for all the samples and the morphology of starch granules was similar, with oval and round shapes. Therefore, different characteristics were found among starches from nine germplasm collections, encouraging the protection of the biological diversity of selected species, aiming at future applications.

The use of acid whey in food formulations is one way to reduce the environmental problems associated with its disposal. In the present study, a new formulation of a drinking dessert was prepared using Lactic cheese whey, milk, xanthan gum at 4 levels (0, 0.1, 0.2 and 0.3%), resistant corn starch at 4 levels (0, 0.5, 1 and 1.5%), cocoa powder and sugar. Samples containing starch and gum had higher viscosity and were completely stable, with no syneresis and sedimentation after a month of storage at 4 oC. Samples containing 0.3% xanthan gum and 1% corn starch were considered as the desired drink based on sensory analysis. Study of the optimal flow behavior indicated that the drinking dessert is a non-Newtonian pseudoplastic fluid, and the Herschel-Bulkily model was the best model to describe the flow behavior. The pH of the synbiotic dessert containing L. GG was almost constant after 7 days of storage at 4 oC, while the pH of samples containing L. paracasei decreased by 0.7. The population of both probiotic bacteria decreased during storage time at 4 oC. The rate of decrease was higher for L. paracasei than L. GG. However, both contained >106 CFU mL−1 , which is necessary for the health benefits of probiotic bacteria.

Currently, nanoencapsulation of bioactive compounds is promising, and is one of the methods that has been proven very effective. The development of food-grade nanoemulsions is in a state of constant innovation due to the interesting features that this method of encapsulation has, such as small droplet size, kinetic stability and appearance. With this technology, it is possible to control some food properties, such as texture, taste and stability. In this article, we present a review of the most commonly used methods in the creation of nanoemulsions, the recent developments of these dispersions, the relevant applications of nanoemulsions in food matrices, the most commonly used food-grade materials and the functionality of nanoemulsions, which are designed primarily to encapsulate compounds with biological activity. Nanoemulsions have been shown to be effective in preventing degradation and improving the bioavailability of bioactive compounds, such as oil-soluble vitamins, antimicrobials, flavours and antioxidants. At the end of this article, facts of interest about acceptance issues and nanotechnology regulatory policies in the food industry are presented.