AgroParisTech professors and librarians in Food Science and Technology have developed information literacy instruction to help students find and use relevant information. The course trains students to develop information literacy competencies: to identify the information needed and define its nature and extent; to access the information with efficiency because they select and use methods, resources and retrieval systems most appropriate to the topic; to evaluate the used methods, information, and sources; to search, access and use information ethically and legally; to read, use and write bibliographic references.
AgroParisTech trains two kinds of students. For Higher Education students (engineering students), the training takes place at their arrival in AgroParisTech, including courses and practical classes: role and management of information in organizations; information on plagiarism; resources in environment, food science and technology; use of relevant tools and methods for searching in databases; reference writing.
For students attending a Master of Science, the training prepares them to produce a literature review. The curriculum includes: information about scientific integrity, plagiarism; information needed for a researcher; critical reading of a journal article; how to manage a literature review: resources used, information search with databases, full text access; reference writing. The students will use these information literacy skills along their studies as well as in their future jobs.

Higher education students usually ask for more training based on case studies. This was addressed by designing a specific food safety module (24 hours) in which students were shown how to predict microbiological risks in food products i.e. they were asked to determine product shelf-life according to product formulation, preservation methods and consumption habits using predictive microbiology tools. Working groups of four students first identified the main microbiological hazards associated with a specific product. To perform this task, they were given several documents including guides for good hygiene practices, reviews on microbiological hazards in the food sector, flow sheets, etc. . . After three-hours of work, the working groups prepared and gave an oral presentation in front of their classmates and professors. This raised comments and discussion that allowed students to adjust their conclusions before beginning the next step of their work. This second step consisted in the evaluation of the safety risk associated with the two major microbiological hazards of the product studied, using predictive microbiology. Students then attended a general lecture on the different tools of predictive microbiology and tutorials (6 hours) that made them familiar with the modelling of bacterial growth or inactivation. They applied these tools (9 hours) to predict the shelf-life of the studied product according to various scenarios of preservation (refrigeration, water activity, concentration of salt or acid, modified atmosphere, etc. . . ) and/or consumption procedures (cooking). The module was concluded by oral presentations of each working group and included student evaluation (3 hours).

Food innovation and entrepreneurship are important topics in graduate food studies. Students should be challenged to promote an innovative attitude towards their future career in the food industry sector, as professionals working in a small and medium-sized enterprise, or in a large multinational company, or even as entrepreneurs with their own working projects. The present case study shows a curricular unit of a master course that intends to integrate the knowledge on new and sustainable technologies and products, based on seminars of experts on hot topics, on visits to food industry enterprises and market expositions and on the development of a state-of-the-art report about an emergent or novel food technology or product with oral presentation. Hot topic seminars included edible coatings, bioprocessing, allying tradition and innovation in food products, new convenience foods, challenging tests, and new clean and sustainable processes. Entrepreneur alumni lectures were also promoted allowing exchange of experiences. Visits included a high pressure technology unit of a food industry, an innovation and development department of a food industry, an entrepreneurship centre and a food exhibition. A satisfaction survey was made, through the response of a questionnaire by the students, proving the effectiveness and success of this unit course framework. A SWOT analysis was carried out to gain a better understanding of the strengths, weaknesses, opportunities, and threats involved in the curricular unit objectives.

Application of an optimized cold chain management system for frozen products can be assisted by monitoring with Time Temperature Integrators (TTI). TTI are smart labels that cumulatively show the product history in an easily measurable, time-temperature dependent change. In the IQ-Freshlabel European project enzymatic and photochromic TTI were developed and tested for frozen products. Further to the technical objectives, training activities were implemented to provide information and training to the staff of Small and Medium-sized Enterprises (SMEs) regarding the properties of the developed TTI and their utilization within food packaging, transport, storage and sale. In total, more than 276 European companies and consumers representing the frozen food industry, the packaging industry and food business operators were successfully trained. The objective of the present article is to describe a general methodology for frozen food shelf life testing and modelling, and the selection of appropriate TTI for specific foods. This document serves as a technical manual for SMEs, including a case study for frozen shrimp and application of enzymatic and photochromic TTI, aiming to build their capacities to understand and use TTI for frozen food products. The value of systematic modelling of the food quality kinetics as well as the response of the TTI in building an effective chill chain management system is also demonstrated. The TTI response study allows a reliable optimization and selection of TTI to be correlated to the target food product for which accurate information on temperature dependence is available. 

Nowadays, there is an increasing need of new skills for PhD students to face the future labour market prospects. PhD graduates must have qualities attractive not only in academia but also outside, in both manufacture and service-oriented enterprises, in small innovative companies, and in the civil services and public administration, among others. To know what the needs of these future employees are, is of great importance to be able to improve their personal and academic formation. The aim of this work was, in the framework of the EC-funded ISEKI Food 4 network, to evaluate the most desirable specific and soft skills that PhD students should acquire by the end of their doctoral studies. To this aim,
several surveys were conducted and sent to the different stakeholders (academia and food industry partners) in order to collect the information needed. Results showed that competences related to research skills and techniques, research management, personal effectiveness and communication skills were considered to be the most valuable skills to be acquired by our PhD students to meet the future needs of the labour market. The importance of these skills was appreciated differently, depending on the stakeholder. To sum up, some recommendations to integrate such valuable skills into the curricula of the PhD student are given.

The qualifications of Food Science and Technology/Engineering (FST/E) professionals were examined by a web-based survey conducted in 15 countries (14 EU and Turkey). The analysis of the responses showed that 65% of the respondents had a higher education (HE) degree (BSc 29%, MSc 28%, and PhD 8%), and 20% carried out extracurricular training before entering in the job market. The main fields of study were Food Science and Technology/Engineering, followed by Agriculture, Nutrition and Health, Safety/Hygiene, and Chemical Engineering in all three levels of HE degrees. Differences in the level of degree between genders were not observed, although a higher percentage of female respondents (36% of all female respondents) reported no higher qualification degree, compared to male respondents (33% of all male respondents). On the contrary, female respondents prevailed in extracurricular studies, compared to male ones. Gender, however, was a differentiating factor as far as the field of studies was concerned with female respondents prevailing in Nutrition and Health and male in Agriculture. A considerable percentage of the respondents acquired either a HE degree or had extracurricular training while working in the 1st job. Extracurricular training both before entering the job market and during work at the 1st workplace comprised mainly the topics Safety and Hygiene, Management, followed by Sensory Science, FST/E and Nutrition and Health. In addition, Marketing Science/Consumer Behaviour was also one of the main topics of company or other training during work at the 1st workplace. 

The aim of this study was to evaluate the survival of Lactobacillus acidophilus that had been simple or double spray dried using chitosan to cause microencapsulation and which had been exposed to model gastrointestinal conditions. In addition, the study also determined the physicochemical properties of the powder containing the microencapsulated probiotic. Chitosan-inulin or chitosan-maltodextrin (1:15 or 1:25) solutions were inoculated with 1012 CFU mL−1 of L. acidophilus, for simple microencapsulation. The different solutions were dried using a spray dryer with an inlet air temperature of 130 ◦C and a solution flux of 4.8 g min−1 . A two-step process was used for the double microencapsulation. In the first step, the probiotic was added to a gelatin-maltodextrin (1:25) solution and then spray dried; for the second step, the microencapsulated probiotic was added to a chitosan-inulin or chitosan-maltodextrin (1:25) solution and then it was spray dried again. With the simple microencapsulated probiotic, a microbial reduction of 7 log cycles was obtained. With the double microencapsulated probiotic only 3 log reductions were achieved. The double microencapsulated probiotic thus demonstrated greater resistance to simulated gastrointestinal conditions. The powders produced were shown to have water activity values of 0.176 - 0.261 at 25 ◦C and moisture content of 0.8 – 1.0%, which are characteristic of spray dried products. The bulk density was significantly (p < 0.05) lower (300 kg m−3 ) for simple than for double (400 kg m−3 ) microencapsulated probiotic powders. Solubility and dispersibility of the powder microcapsules were better at lower pH values. Double microencapsulation using a process of spray drying is therefore recommended for probiotics, thus exploiting chitosan’s insolubility in water, which can be applied for the of development food products. 

Probiotics in almond-based matrices were considered as a means of obtaining fermented products which would cover both the current demand for health-promoting foods and for alternatives to standard yoghurts. Firstly, the combined effect of high pressure homogenisation (HPH) and heat treatment on the physical stability of almond “milk” was studied. The beverage was homogenised by applying 62, 103 and 172 MPa (MF1, MF2 and MF3 respectively); MF3 was also combined with two different heat treatments (85 °C-30 min (LH) and 121 °C-15 min (HH)). Both microstructure and colloidal stability were analysed in all the processed samples to select the most suitable treatment with which to obtain a stable product. The selected almond milk was then fermented with probiotic Lactobacillus reuteri and Streptococcus thermophilus and the final product was characterised throughout cold storage time (28 days) as to pH, acidity, serum retention and starter viability. A sensory evaluation and probiotic survival to in vitro digestion was also conducted. The results showed that the physical and structural almond-milk properties were affected by both HPH and heat treatments, obtaining the greatest stability in MF3-LH samples. The fermented milk permitted probiotic survivals above the level suggested as minimum for ensuring health benefits during the entire controlled time and, hence, can be considered as a functional food. No differences in the sensory acceptability of the product were found between 1 and 28 storage days. Therefore, a new, functional, fermented product was developed, which was suitable for targeted groups, such as the lactose-intolerant and cow-milk-protein allergic populations.

The aim of this study was to encapsulate the steviol glycosides (SGs), derived from Stevia rebaudiana (Bert) Bertoni leaves, by applying a spray-drying method. The purpose was to minimize the bitter aftertaste of the SGs as well as to ameliorate/improve their properties. The encapsulation agents used were maltodextrin (19 DE) and inulin in a ratio of 80 : 20, while three levels of SGs in total solids (1.5, 2.5 and 3.5 %) were studied. The encapsulated SGs products were evaluated for their hygroscopicity, solubility, moisture content and microencapsulation efficiency (MEE %). Also, syrups prepared with encapsulated SGs, at 1 % w/v, were tested for their viscosity, refractive index, turbidity and sensory properties. Significant differences (P<0.05) in MEE %, moisture content, hygroscopicity and solubility values of the encapsulated SGs products were observed depending on the level of SGs in total solids. In particular, the MEE %, the hygroscopicity and the solubility values ranged from 62.36, 82.46 to 94.67 %, 21.51, 26.67 and 24.25 % and 99.93, 97.50 to 96.03 % for encapsulated SGs products produced with 1.5, 2.5 and 3.5 % SGs in total solids, respectively. The encapsulated product produced with 2.5 % steviol glycosides in total solids presented the most appealing sensory and quality characteristics.

Pumpkin seeds are commonly consumed in Greece. Although Cucurbita moschata is locally grown in Lemnos and is traditionally used in pumpkin pies, the seeds are currently discarded after consumption of the fruit flesh. The aim of the present study was to investigate the nutritional functionality of pumpkin seeds from Cucurbita moschata grown in Lemnos. Cucurbita moschatas’ seeds, raw or roasted, were appropriately extracted and the results are presented for raw versus (vs) roasted seed extracts. The phenolic content was expressed as µg gallic acid/g of seeds according to Folin-Ciocalteau assay (370.3 ± 19.1 vs 551.0 ± 22.0). Antioxidant capacity was expressed as equivalent amount for 50% scavenging in mg of seeds for DPPH (50.03 ± 5.91 vs 25.82 ± 6.77) and ABTS (17.85 ± 0.77 vs 12.77 ± 0.76) assays, and as µmol of trolox/g of seeds for FRAP (1.19 ± 0.05 vs 2.50 ± 0.23) and CUPRAC (2.13 ±0.11 vs 3.25 ± 0.06) assays. Antiinflammatory/antithrombotic and anti-diabetic activities were expressed as mg of seeds for 50% inhibition of platelet activating factor (0.62 vs 0.15) and as µg of seeds for 25% inhibition of alpha-glycosidase (40.0 vs 61.0) activities respectively. Moreover, anti-atherogenic activity was expressed as the % increase in lag time of human plasma oxidation (62.7 versus 163.2) Raw and roasted pumpkin seed extracts exert anti-oxidant, anti-thrombotic/anti-inflammatory, antiatherogenic and antidiabetic activities. Cucurbita moschata seeds may represent a novel opportunity for development of functional foods, with a local interest in Lemnos that would contribute also to the regional public health improvement.