Current issue

Volume 13, Issue 2, 2024
Online ISSN: 2182-1054
Volume 13 , Issue 2, (2024)
Published: 18.10.2024.
Open Access
All issues
Contents
01.12.2018.
Professional paper
Study of the self-stabilization ability of Tzatziki (a traditional Greek ready-to-eat deli salad)
Stavros Lalas, Vassilis Athanasiadis, Ioanna Karageorgou, Eleni Bozinou, Vassilis G. Dourtoglou
01.12.2018.
Professional paper
Moisture sorption isotherm and thermal characteristics of freeze-dried tuna
Mohammad Shafiur Rahman, Mohammed Khalfan Al-Khusaibi, Kutaila Abbas AL-Farsi, Ismail Mohamed Al-Bulushi, Aisha Abushelaibi, Nasser Al-Habsi
01.12.2018.
Professional paper
Moisture sorption isotherm and thermodynamic properties of jamun (Syzygium cumini L.) powder made from jamun pulp and seed
Indira Dey Paul, Madhusweta Das
01.12.2018.
Professional paper
Use of response surface methodology (RSM) for composite blends of low grade broken rice fractions and full-fat soybean flour by a twin-screw extrusion cooking process
Nahemiah Danbaba, Iro Nkama, Mamudu Halidu Badau
01.12.2018.
Professional paper
Physico-chemical composition and antimicrobial protein content of early lactation donkey milk
Maria Aspri, Kallis Souroullas, Christina Ioannou, Photis Papademas
18.04.2019.
Original scientific paper
Moisture sorption isotherm and thermodynamic properties of jamun (Syzygium cumini L.) powder made from jamun pulp and seed
The present work aimed to: i) find the suitable proportion, based on sensory evaluation, of microwave-convective hot air dried jamun (Syzygium cumini L.) pulp and seed kernel powder to be mixed for the preparation of jamun powder (JP); ii) generate and model the moisture sorption isotherm (MSI) of JP; and iii) estimate net isosteric heat of sorption (qst), spreading pressure (Φ), net integral enthalpy (Qin), and net integral entropy (Sin). To formulate JP, the proportion (w/w, db) comprising 2% kernel and 98% pulp powder was the most desirable. The Peleg model was the best fit to MSI of JP. The qst decreased following linear relationship from 11.02 kJ. mol−1 at 5% equilibrium moisture content (EMC) to 0.27 kJ. mol−1 at 30% EMC. The Φ increased with increase in water activity and decreased with increase in temperature from 25 oC to 35 oC, and the values of Φ at 45 oC were even higher than at 25 oC. Net integral enthalpy (Qin) initially decreased till 6% moisture content in JP and displayed an increasing trend with further increase in moisture content. On the contrary, Sin kept on decreasing continually with increasing moisture content. The moisture zone of 7-11% was considered safe for storage of JP within the temperature range of 45-25 oC.
Indira Dey Paul, Madhusweta Das
18.04.2019.
Original scientific paper
Stability of vitamin C in broccoli at different storage conditions
In this study, the retention of vitamin C in fresh broccoli stored at different temperatures (i.e. chiller, room, cooking, and roasting or baking; 5-120oC) was investigated. The thermal stability of vitamin C in broccoli was analysed at 5, 20, 45, 60, 70, 80, 110, and 120oC. The vitamin C content was measured by the indophenol titration method. Vitamin C was affected negatively at all stored temperatures. The degradation of vitamin C was modelled by first-order reaction kinetics and the reaction rate constants were observed as 9.03Ö10−8 and 5.65Ö10−3 s −1 when stored at 5oC and 120oC, respectively. The activation energy was estimated as 74.2 kJ/mol within the temperature range used in this study. The lowest decay of vitamin C was observed during the chilling condition. The data on retention of vitamin C in broccoli could be used to determine their stability, when stored as raw, and when heated at different temperatures.
Nasser Al-Habsi, Sithara Suresh, Amani Al-Yhmedi, Marwa Al-Shoryani, Mostafa I. Waly, Mohammad Shafiur Rahman
18.04.2019.
Original scientific paper
The impact of processing methods on chemical composition, mineral bioavailability and functional properties of Nigerian-grown cashew flour
In this study, the effect of processing methods on the nutritional quality and functional properties of cashew (Anacardium occidentale Linn) kernels were investigated. The kernels were soaked, autoclaved, roasted or germinated at varying time duration; raw kernel served as control. The samples were analysed for chemical, mineral bioavailability and functional properties. Data was subjected to analysis of variance and means were separated by the Duncan multiple range test. The result of chemical composition analyses revealed that raw cashew kernels contained 3.55±0.08% moisture, 21.3±0.05% protein, 45.0±0.15% fat, 2.53±0.02% fibre, 1.59±0.02% ash, 26.1±0.01% carbohydrate, 521.75 Kcal/g energy, 2210.09±0.02mg/kg calcium, 1712.54±0.03mg/kg magnesium, 60.04±0.01 mg/kg iron and 36.74±0.02mg/kg zinc. Tannin, phytate and oxalate concentrations in the raw cashew kernel were 10.14±0.03 mg/kg, 99.30±0.02mg/kg and 11.03±0.03mg/kg respectively. Increased fat, ash and fibre levels were noted for treated samples compared to raw kernels. Mineral concentrations were increased significantly by various treatments compared to raw kernel; however, germination resulted in the highest increase of mineral content. A reduction trend was observed in phytate, oxalate and tannin concentrations in the treated samples with respect to increased processing time. Consequently, various treatments influenced the bioavailability of mineral elements. Treated samples exhibited significant differences in loose and packed bulk densities, water and oil absorption capacities when compared to raw kernels. Germination shows potential to generate not only much needed nutrients in cashew for human development, but also improved bioavailability of nutrients and functionality compared to other processing methods. This approach can used in Community Nutrition and Emergency Feeding Programmes, in developing countries, where the consequence of anti-nutritional factors may worsen the incidence of malnutrition and disease.
Folasade Makinde, Joel Ifeoluwa Hannah
18.04.2019.
Original scientific paper
Antioxidant indices and amino acid composition of phenolic containing Lima beans (Phaseolus lunatus) after simulated human gastrointestinal digestion
The present investigation was designed to characterize the phenolic profile of Lima beans (Phaseolus Lunatus) and also to evaluate the antioxidant indices: total phenolic content (TPC), total flavonoid content (TFC), ferric reducing antioxidant power (FRAP), 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and amino acid composition at different stages of simulated gastrointestinal digestion (oral, gastric, intestinal). High Performance Liquid Chromatography (HPLC-DAD) analysis revealed the presence of some phenolic compounds (gallic acid, catechin, caffeic acid, rutin, quercitrin, quercetin, kaempferol and apigenin), with a reduced amount (mg/g) after cooking: gallic acid (raw: 1.96 ± 0.02; cooked: 1.82 ± 0.01); catechin (raw: 0.83 ± 0.01; cooked: 0.73 ± 0.01); rutin (raw: 2.61 ± 0.03; cooked:1.74 ± 0.03); quercitrin (raw: 5.73 ± 0.01; cooked: 5.68 ± 0.01); apigenin (raw: 2.09 ± 0.01; cooked: 1.79 ± 0.02), with exception of quercetin (raw: 2.11 ± 0.02; cooked: 5.73 ± 0.02) and caffeic acid (raw: 2.08±0.04; cooked 2.95 ± 0.04). The results of the antioxidant indices of in vitro enzyme digested lima beans revealed higher values for cooked Lima beans compared to the raw counterpart, with a stepwise increase at the different stages of in vitro digestion, with the exception of ferric reducing antioxidant power; TPC (oral digestion: 65.44 ± 0.96; gastric digestion:134.87 ± 0.46; intestinal digestion: 517.72 ± 4.70; mg/g tannic acid equivalent), TFC (oral digestion: 199.30 ± 6.43; gastric digestion: 1065.97± 1.22; intestinal digestion: 3691.87 ± 4.2; mg/g quercetin equivalent), DPPH (oral digestion: 85800.00 ± 305.50; gastric digestion: 99066.66 ± 115.47; intestinal digestion: 211354.20 ± 360.84; µmol TE/g sample). The results also revealed a progressive increase in the antioxidant indices and amino acid composition (mg/kg) for both raw and processed lima beans at various stages of the in vitro digestion, with the intestinal phase of simulated digestion ranking higher. This implied that the Lima beans contained some essential amino acids and antioxidant molecules that would be readily available after passing through the gastrointestinal tract and could therefore be explored as functional food in the management of free radical mediated diseases.
Sule O. Salawu, Oluwaseun M. Folorunso, Akintunde A. Akindahunsi, Aline A. Boligon
18.04.2018.
Original scientific paper
Use of response surface methodology (RSM) for composite blends of low grade broken rice fractions and full-fat soybean flour by a twin-screw extrusion cooking process
In this study, seventeen (17) composite blends of broken rice fractions and full-fat soybean, formulated using response surface methodology and central composite design within a range of barrel temperatures (100-140oC), initial feed moisture content (15-25%) and soybean composition (8-24%), were extruded with a twin-screw extruder and the expansion and color indices were optimized. The results indicated a significant (p<0.05) effect of extrusion conditions on the responses. Fitted predictive models had coefficients of 88.9%, 95.7%, 97.3%, 95.4% and 95.2%, respectively, for expansion index, bulk density, lightness, redness and yellowness. The p-value and lack-of-fit tests of the models could well explain the observed variability and therefore could be used to establish production setting for the twin-screw extruder. The optimum extrusion conditions were found to be 130 oC (barrel temperature), 20% (feed moisture level) and 23% feed soybean composition and optimum responses in terms of bulk density, expansion index, lightness, redness and yellowness chroma indices were 0.21 g cm−3 , 128.9%, 17.1, 3.13 and 24.5, respectively. This indicates that optimum conditions can be established in twinscrew extrusion cooking of broken rice fractions and full-fat soybean composite blends that can result in product of low bulk and maximum expansion with a satisfactory light yellow product color that can be used to produce products that valorize broken rice and reduce qualitative postharvest loss.
DANBABA NAHEMIAH, Iro Nkama, Mamudu Halidu Badau